1 / 5

LCLS-II Charge Measurement

LCLS-II Charge Measurement. Tor Raubenheimer One’s Day. Toroids and Faraday Cups. Toroids and faraday cups used to establish absolute charge values LCLS-I does not heavily use toroids for beam physics and they are not well calibrated Would be nice to fix this

washi
Download Presentation

LCLS-II Charge Measurement

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LCLS-II Charge Measurement Tor Raubenheimer One’s Day

  2. Toroids and Faraday Cups • Toroids and faraday cups used to establish absolute charge values • LCLS-I does not heavily use toroids for beam physics and they are not well calibrated • Would be nice to fix this • Toroids also used for BCS and MPS functions • Maintain BCS function. • ?MPS function could be implemented with BPMs? • LCLS-I Faraday cup design inadequate for absolute charge measurements

  3. LCLS-II Injector Diagnostic Layout IM03b FC03b FC03b IM02b FCS1b FCG1b • Present concept for injector charge diagnostics • 4 faraday cups: 2 at 6 MeV, one at 60 MeV and one in 135 MeV spectrometer • 2 Toriods: IM02b and IM03b

  4. LCLS-II Accelerator for 250 pC, 120 Hz RF gun-2 RF gun-1 existing L0 L0 IM02b IMBC1Ob und-hall-1 IM03b LCLS-I X X L1 BC1 L2 BC2 L3 L1 BC1 L2 BC2 L3 3-15 GeV one more km of linac Sector-20 wall HXR 4-14 GeV bypass line SXR und-hall-2 Two Toroids in injector, one in linac, 4 in undulators

  5. Absolute Charge Calibration • New Faraday cups • 6 MeV: more than 99% charge capture versus less than ~80% for LCLS-I design • 135 MeV: more than 98% charge capture • Externally calibrated toroid– perhaps inserted into BC1

More Related