1 / 9

Coil TQ 36 CMM Measurements (Never Compressed)

Coil TQ 36 CMM Measurements (Never Compressed). Technical Division Technical Memo TD-12-014 R. Bossert 6-23-2012. Measurements taken by Rob Riley 6-21-2012. Note: TQ36 has 54/61 TQ/LQ cable, with no core, and 75 µm double butt-lapped eglass as cable insulation. T. NT.

vivien
Download Presentation

Coil TQ 36 CMM Measurements (Never Compressed)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Coil TQ 36 CMM Measurements (Never Compressed) Technical Division Technical Memo TD-12-014 R. Bossert 6-23-2012 Measurements taken by Rob Riley 6-21-2012 Note: TQ36 has 54/61 TQ/LQ cable, with no core, and 75 µm double butt-lapped eglass as cable insulation.

  2. T NT Coil 36 56 mm from Lead End looking from Lead End (in LE splice block) Never compressed Mean = 20.7 mils (526 um) Mean = 20.5 mils (521 um) Mean = 20.9 mils (531 um) 19.6 21.0 18.4 21.6 23.3 20.3

  3. T NT Coil 36 114 mm from Lead End looking from Lead End (in LE saddle) Never compressed Mean = 19.8 mils (502 um) Mean = 20.0 mils (508 um) Mean = 19.5 mils (495 um) 17.7 17.4 22.3 21.6

  4. T NT Coil 36 315 mm from Lead End looking from Lead End (in ramp area) Never compressed Mean = 22.8 mils (580 um) Mean = 22.8 mils (580 um) Mean = 22.8 mils (580 um) 23.4 19.8 25.9 22.3

  5. T NT Coil 36 499 mm from Lead End looking from Lead End (in body) Never compressed Mean = 23.8 mils (605 um) Mean = 23.8 mils (605 um) Mean = 23.8 mils (605 um) 20.7 24.0 26.9 23.6

  6. T NT Coil 36 696mm from Lead End looking from Lead End (in body) Never compressed Mean = 25.0 mils (634 um) Mean = 25.2 mils (641 um) Mean = 24.7 mils (627 um) 25.8 21.8 27.6 24.7

  7. T NT Coil 36 971 mm from lead end looking from lead end (in RE saddle) Never compressed Mean = 18.0 mils (458 um) Mean = 19.5 mils (494 um) Mean = 16.6 mils (422 um) 17.9 20.8 14.6 23.0 16.9 15.0

  8. TQ36 coil average size Sizes in saddles and splice block assumed to be the largest size shown on plot because indented areas are filled in with kapton. Dimensions in mils (microns) Note: on lead end, outer lead is on the transition or “T” side.

  9. Coil sizes, TQ coils 34-36 Sizes in saddles and splice block assumed to be the largest size shown on plot because indented areas are filled in with kapton. Dimensions in mils (microns) Note: all three coils were reacted and impregnated with the mold cavity expanded by .020 in. from nominal.

More Related