1 / 15

degraded image

degraded image . Step 1. I crumpled the photograph and began to boil water. . Step 2 . I boiled some water. Added two tea bags and a handful of mint leaves. I added salt to the mixture and left the photograph in the water overnight. . Step 3.

vicky
Download Presentation

degraded image

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. degraded image

  2. Step 1 I crumpled the photograph and began to boil water.

  3. Step 2 I boiled some water. Added two tea bags and a handful of mint leaves. I added salt to the mixture and left the photograph in the water overnight.

  4. Step 3 After letting the photo sit in the tea overnight I let it dry in the sun. After it dried I mixed oxi-clean with hot water and poured it over the photograph. I also added some unmixed oxi-lean to the photo. I let all of this dry in the sun.

  5. Results from step 3

  6. Step 4 I ironed the photograph with a piece of cloth over it to keep photo from melting into the iron.

  7. Step 5 I mixed red gouache and water and painted over the photo with a sponge brush.

  8. Step 6 I baked the photo in a toaster over. I left the photograph in the oven for about 5 minutes.

  9. Step 7 I ripped the picture into four sections.

  10. Step 8 I then took a picture of step 7 and brought it into photoshop. Using the filters I clicked filters then pattern maker. I selected the rip of the photograph and the body in the picture and generated a pattern.

  11. Step 9 I printed step 8 onto transparency film. The ink was low so it printed out a pink color.

  12. Step 10 I sprayed a piece of rives BFK heavy weight paper with water and put the transparency onto the paper ink side down.

  13. I removed the transparency film and let it dry in the sun.

More Related