1 / 71

Electric Power Quality

Electric Power Quality. Adopted from Prof. Ward Jewell Lecture. Electric Power Quality. Ward Jewell. Copied in .ppsx Format for Educational Purpose by Sudaryatno Sudirham. Hospital CT scanner failures. During a normal half-hour series of scans, a CT scanner records

verdi
Download Presentation

Electric Power Quality

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Electric Power Quality Adopted from Prof. Ward Jewell Lecture

  2. Electric Power Quality Ward Jewell Copied in .ppsx Format for Educational Purpose by Sudaryatno Sudirham

  3. Hospital CT scanner failures During a normal half-hour series of scans, a CT scanner records images on a microcomputer that also controls the scanner. As often as twice each day, this hospital's scanner would shut down before a series was complete. The recorded images were lost, and the patient was subjected to a repeat of the entire series. Utility personnel found one cause of the shutdowns to be momentary power outages caused by trees brushing against utility distribution lines. They corrected this by trimming trees. Another cause was then found to be voltage sags that occurred when the hospital's chiller started. An improper setting on the scanner's power control was corrected, and this problem disappeared.

  4. Radio transmitter damage A commercial FM radio station experienced repeated failure of its transmitter. Utility engineers determined that each failure coincided with switching of capacitors at the distribution substation. Capacitor switching transients were recorded at the radio station service entrance. An electrical snubber was designed to reduce the frequency and damp oscillations in the transmitter. The snubber was installed, and no further rectifier failures occurred.

  5. Metal fabrication plant equipment failures An industrial plant where sheet metal is fabricated experienced various machinery failures. An initial survey revealed adjustable speed dc motor drives, a common disturbing load, in use in the plant. Power quality measurements confirmed that one of the drives was causing severe "notching," a transient voltage disturbance. This was corrected using series reactors. A grounding error on a transformer was also found and corrected.

  6. HARMONICS

More Related