1 / 15

Taking Cave Rescue Telephones Forward

Taking Cave Rescue Telephones Forward. Stuart France. WHY? Single-wire field telephones remain the most reliable and straightforward comms tool for cave rescue in Wales. The 1988 version. Second-hand BT “4T” earpieces as mic/spkr DPDT toggle switch for PTT function

uma
Download Presentation

Taking Cave Rescue Telephones Forward

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Taking Cave Rescue Telephones Forward Stuart France

  2. WHY?Single-wire field telephones remain the most reliable and straightforward comms tool for cave rescue in Wales

  3. The 1988 version • Second-hand BT “4T” earpieces as mic/spkr • DPDT toggle switch for PTT function • STDT toggle switch for on/off • 9 volt PP3 battery • No call tone facility • PCB potted but switches vulnerable • Diecast box, no gasket, earth connection • Line connection as flying lead with croc clip

  4. The 1988 version (sort of)

  5. What happened in practice? • Turned on by accident  flat battery • No LED  turned off by accident • Toggle switches snapped • Stored damp or with water inside box • Corrosion of wires / switches • No way to get the attention of called party • Speech level fades as battery drains • PP3’s not easy to get in a hurry

  6. Nigel Lovell version • Better box and construction standard • Higher line impedance • LED flashes once when turned on/off • Other people have added 4000 or 74 logic chips for tones etc, but basically they are all much the same as “1988”

  7. Has anything happened in the past 20 years? • Microprocessors costing 50p • Software seen as an asset not a risk • DC-DC power supply chips • Battery technology advances • The iPod generation grow up

  8. Updating the phone spec • Single SPST push-button interface • 3xAA alkaline to 12V DC-DC step-up • Microprocessor for: • Analysing push-button gestures • Power on/off function, low battery warning • LED signalling • PTT function • Tone generation • Upgradeable software

  9. Ruggedization • Brand new military spec “4T” earpieces • Diecast box with a gasket • IP68 push-button not toggle switches • Screw terminal post for line connection • Croc clip lead as an accessory • Circuit and switch wiring potted • 3xAA Battery holder replaceable

  10. The development version

  11. Push Button • 3-second push to power it up • Once running: • Push and hold to talk, as per normal • Double-click to send a call tone • Click or timeout to end call tone • Quad-click to power off

  12. Tone Generation • Power on/off sound • Warbling call tone • Roger bleep after a transmission • Short bleeps for low battery warning • Once a minute?

  13. LED functions • Intermittent flash while turned on • Every 10 secs?

  14. 2009 Prototype • PIC12F629 with 6 I/O lines in a DIL8 device • Good for 2.5 to 5.0 volts, in-circuit programmable • MAX761 converts 3xAAs to 12 volts • Starts up at 2.5V, low battery logic output to uP • One push-button switch • Relay instead of the DPDT toggle switch • Diecast box with gasket • NATO specification tropicalized 4T earpiece • Audio circuit as per Nigel Lovell • Screw terminal post for line connection

More Related