1 / 28

Composition of Methanol-Water Batch Distillation

Composition of Methanol-Water Batch Distillation. September 20, 2005. Prepared by: Jason Hixson Don Scott Michael Hickey. Objective. Determine the composition of liquid methanol-water binary system at equilibrium based on temperature in a distillation column.

ulema
Download Presentation

Composition of Methanol-Water Batch Distillation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Composition of Methanol-Water Batch Distillation September 20, 2005 Prepared by: Jason Hixson Don Scott Michael Hickey

  2. Objective • Determine the composition of liquid methanol-water binary system at equilibrium based on temperature in a distillation column.

  3. Vapor-Liquid Equilibrium Diagram Antoine Equation Vapor Pressure in mmHg of methanol and water. T is the absolute temperature A, B, and C are constants.

  4. Antoine Constants • Are calculated using using the known temperatures and vapor pressures from Perry’s Chemical Engineers Handbook. Methanol Water

  5. Antoine Constants • Arbitrary values are then chosen for A, B, and C giving an incorrect vapor pressure. • Excel solver is then used to find values of A, B and C for both methanol and water which gives the correct pressure.

  6. Van Laar’s Model Gamma correction factors for non-ideal system.

  7. Gamma Correction Factor A and B are constants Ideal Gas Constant = 1.987 cal/K*g-mol Temperature (K)

  8. Using data from Perry’s where P is 760 mmHg the constants A and B can be calculated using solver in Excel Gives

  9. Raoult’s Law Vapor Liquid

  10. Set Up = (Pcalc-Pactual) • Set arbitrary temperature Use Solver to minimize DIF cell by changing T(C).

  11. VLE Diagram Vapor Liquid

  12. Composition Calculation Using WFIT Program 0.38652+0.39727*B2-0.012737*B2^2+0.00013528*B2^3-(0.00000048036)*B2^4)+1%

  13. Reboiler Composition vs Time 0% Reflux 75% Reflux 2500 W Initial xm: 23% Initial Vm: 16.86 L

  14. Tray # 12 Composition vs Time 0% Reflux 75% Reflux 2500 W

  15. Tray # 11 Composition vs Time 0% Reflux 75% Reflux 2500 W

  16. Tray # 10 Composition vs Time 0% Reflux 75% Reflux 2500 W

  17. Tray # 9 Composition vs Time 0% Reflux 75% Reflux 2500 W

  18. Tray # 8 Composition vs Time 0% Reflux 75% Reflux 2500 W

  19. Tray # 7 Composition vs Time 0% Reflux 75% Reflux 2500 W

  20. Tray # 6 Composition vs Time 0% Reflux 75% Reflux 2500 W

  21. Tray # 5 Composition vs Time 0% Reflux 75% Reflux 2500 W

  22. Tray # 4 Composition vs Time 0% Reflux 75% Reflux 2500 W

  23. Tray # 3 Composition vs Time 0% Reflux 75% Reflux 2500 W

  24. Tray # 2 Composition vs Time 0% Reflux 75% Reflux 2500 W

  25. Tray # 1 Composition vs Time 0% Reflux 75% Reflux 2500 W

  26. Reflux Composition vs Time 0% Reflux 75% Reflux 2500 W Collected 1.69 L Collected 6.38 L

  27. Conclusions • At 0% reflux the amount of distillate collected was larger than 75% reflux. • At 75% reflux the purity of methane was a much higher quality. • If quality is more important then a high reflux percentage is needed. • If quantity and timeliness is more important then a low reflux is needed.

  28. QUESTIONS?

More Related