1 / 8

chain sling

Commercial units like the industries, constructions, shipyards, and other related establishments use heavy machinery, equipment, and tools. Often they need lifting of these units within the plant from one location to the other. They may also need to move them out of the plants on trucks or large trailer vehicles.<br>Visit Us:- https://www.ukliftingstore.co.uk/chains-and-rigging<br>

Download Presentation

chain sling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Top Benefits of using single leg chain Sling in the Manufacturing Units

  2. Introduction Single leg chain sling can lift heavy loads and carry them between two points of any distance. The fittings at the upper and lower end can connect firmly with the top support and the load. The coupling links at the two ends are stated to be safe and secure. It is possible to increase the chain length to any value depending on the specific load and landing requirements.

  3. Sling Material – from Steel to Cast Iron Most of the manufacturing units may use steel slings for lifting, moving, landing, and installation. It is flexible and durable. The probability of rusting and corrosion is stated to be near to zero. However, the load capacity could be limited to a few tens of tons. The cast iron material, on the other hand, may carry up to a few hundreds of tons. It could be prone to rust and corrosion. However, it is possible to have powdered finishing and painting to reduce the probability considerably for years.

  4. Sling Length – from Short to Long Short-chain slings are used for lifting larger dimensions of loads. If the beam height is less than 15 feet, such short slings may be useful. It is because of the load and personal safety factors. You should also consider the landing location. If it is inside a machine, the reach has to be shortened or increased, depending on the distance between the beam and the landing spot. A long link can be useful when the distance between beam and landing space is high. For example, you may have to land the load on to the floor or under-floor location. You can choose the reach depending on your specific needs.

  5. Chain Thickness – Load Capacity and Durability The thickness of the chain in the chain sling can determine how much load it can carry. It depends on the manufacturing and finishing procedures of the chain. Heat-treated materials like steel and cast iron can have higher tensile strength and load capacity. The application of single leg chain sling may be limited compared to the 2 leg chain sling. However, you have to consider your requirements and make a decision. The 2-leg system may carry two loads simultaneously. But you should calculate the net weight of the supported load. If it happens to be higher, you can opt for the 2-leg sling.

  6. Chain Thickness – Load Capacity and Durability The thickness of the chain in the chain sling can determine how much load it can carry. It depends on the manufacturing and finishing procedures of the chain. Heat-treated materials like steel and cast iron can have higher tensile strength and load capacity. The application of single leg chain sling may be limited compared to the 2 leg chain sling. However, you have to consider your requirements and make a decision. The 2-leg system may carry two loads simultaneously. But you should calculate the net weight of the supported load. If it happens to be higher, you can opt for the 2-leg sling.

  7. Conclusion Single leg chain sling is stated to be highly efficient for small and medium scale industries and construction units with low to medium load requirements.

  8. Contact US Name: UK Lifting Store Address: Oak Lane Kingswinford West Midlands, Uk Contact: 0121 3680662 Website: http://www.ukliftingstore.co.uk Email Id: sales@ukliftingstore.co.uk

More Related