Conventions That You Should Follow While Writing Engineering Dissertation- TutorsIndia.com for my Engineering Dissertati

1. Technical Writing Conventions that You Should Follow while Writing Engineering Dissertation Dr. Nancy Agens, Head, Technical Operations, Tutors India info@tutorsindia.com In Brief You will find the best dissertation research areas/topics researchers enrolled in Engineering and Technology. In order to identify future research topics, we have reviewed the technical conventions. (recent peer- reviewed studies). Technical writing is far much different from the other casual forms of writing such as essays, poetry etc There are some specific guidelines or conventions to be followed while writing a technical document. There are different types of technical documents such as reports, white paper, dissertation etc. It is necessary that the content incorporated in technical documents in precise, in accordance with the format and accurate. Keywords: Research Academic Writing, Writing Technical Conventions, Literature Review Writing, Literature Review Computing, Machine Learning, DBMS I. BACKGROUND Technical writing differs from the other forms such as advertising, essay writing , poetry etc in different aspects such as language style, formatting etc. The technical writing is associated with process, system and contrary to the non- technical documents it emphasizes on accuracy rather than style. Thus it becomes necessary that in order to develop a good technical writing the content should be accurate, concise, clear, well-planned. In addition the spellings, grammatical errors should also be considered significant while preparing the document (Ali & Al- Othmany, 2012). To summarize it can be asserted that technical writing emphasizes on the accuracy of matter and the language used (grammatically correct). Apart from the aforementioned constructs, the technical writing also adheres to specific rules and conventions (McMillan & Weyers, 2010). Also, avail dissertation proposal, dissertation topic selection, research planning service and more for any research project. There are different approaches that are followed while writing technical documents such as dissertations, reports etc but there are some specific guidelines or conventions that should be followed by engineers so as to produce efficient and accurate documents. The conventions include all the factors that should be taken into account by the writers from the beginning of preparing the document to its final drafting (Beer & McMurrey, 2005). There is also literature review help to bring more attention on Engineering and technology. Thus in order to prepare a proper dissertation it is imperative that the following sections are included in it in a sequential manner. It is not necessary that all the engineering documents should include following sections because the content and format varies for different type of documents. The sections included in a technical document are complex and might vary. In addition the content developed is also based on the length and significance of topic. Thus it is necessary that the technical writers have sound knowledge of conventions before writing the different sections of a dissertation. for future research Proposal, Help, Cloud Copyright © 2020 TutorsIndia. All rights reserved 1

2. In Writing for Science and Engineering: research article, Reports and presentation, the researcher (Silyn- Roberts, 2012) defines a layout by the shortening AIMRAD that views for: Abstract Introduction Methods & materials Results Discussion A snippet of the conventions to be followed while writing these sections of the technical document is given as follows: 1.Abstract:writing an abstract is the most important element that gives an insight of whole document. It gives an idea about the approach followed in research. Though the length of abstract varies for different documents, in general it should not have more than 300 words. 2.Introduction: should exhibit association with the topic and future scope of the document. It is that part of the document that is planned as per the audience. This section gives a brief idea about the different works performed by others. To summarize, this section comprises background, objectives, formulation and research outline. 3.Literature review: In this section of the document a brief description of the previous works and the present advancements associated with the document is mentioned. 4.Methods & Materials: This section includes the procedure and materials that are employed for conducting the research. It discusses the experimental design of the research. 5.Results & discussion: This part of the document comprises experimental data, and discusses observations of the author. It presents the data formatted in different forms such as tables, graphical illustrations, charts etc. 6.Conclusion & Recommendations: This is the most vital section of document as it gives an explanation of the why the results obtained should be considered as valid. Thus to give a clear understanding of the research to the audience the content presented in this section should be precise and accurate. Considering the conclusion obtained the author can provide some useful recommendations and enable the author as well as audience to decide that how can the approach discussed be implemented and whether it will be feasible or not. II. SPECIAL FEATURES OF TECHNICAL WRITING Apart from the afore-mentioned elements of a technical document, there are also some other features that should be incorporated. Some of these features are: A.Use of Tables and Graphics: Tables, diagrams, graphs, charts etc are some of the key elements that are likely to be found in an engineering dissertation. These illustrative forms of presenting the content enable the author to present the content effectively as well as allow the reader to understanding of the content. In addition these forms also give a professional look to the document and facilitate a clear comparison in the change of data. However, in order to include this feature in the report the writers should have knowledge about the conventions to be followed. These conventions explain information about labeling, numbering etc necessary incorporating graphics into text. B.Graphics in Instructions: While preparing a technical document it is sometimes not possible to convey proper information through words. In this case graphics serve the need. They convey the information as desired by the author. The introduction have proper problem provides conditions for the results and Copyright © 2020 TutorsIndia. All rights reserved d 2

3. C.Plagiarism: This the most important feature of any document. Plagiarism Report can be defined as the use of other’s work, ideas presenting them as their own work and not providing any sources or reference to it. This might seem easier to some but this issue needs to be rectified and hence the content should be plagiarism free. D.Reference: There are generally three most common styles of referencing followed in dissertation. They are as follows: 1.Parenthetical short text references linked to a list of references Modern Language Association (MLA) style American Psychological Association (APA) style 2.In-text numbers linked to a list of references Council of Biology Editors (CBE) citation-sequence system Institute of Electrical and Electronics Engineers (IEEE) reference style 3.In-text numbers linked to footnotes or endnotes with or without a list of references Besides the features, some other features that should be incorporated while writing engineering dissertation are as follows: A.Abbreviations: mentioned in any technical document for the first time should be spelled out fully. B.Numbers: There is a wide use of numbers in an engineering document. However, to avoid confusion there have been mentioned some guidelines by Beer & McMurrey (2005). C.Equations: Equations incorporated in any technical document as they convey the ideas more effectively than words (Fezari & Al Dahoud, 2018). III. SUMMARY From the above discussion it can be concluded that adhering to certain guidelines while writing an engineering dissertation avoids confusion and fulfils the objective of delivering a concise and accurate report. The conventions are helpful in organizing a well-planned report. Keeping these conventions in mind one can plan organization of thesis properly. REFERENCES [1] Ali, M. S., & Al-Othmany, D. (2012). How to be an Effective Technical Writer? International Journal of Engineering Pedagogy (IJEP), 2(3), 4. https://doi.org/10.3991/ijep.v2i3.2094 [2] Beer, D. F., & McMurrey, D. A. (2005). A guide to writing as an https://books.google.co.in/books?id=uL8eAQAAI AAJ [3] Fezari, M., & Al Dahoud, A. (2018). Guide and Hints to write engineering https://www.researchgate.net/publication/3278317 67_Guide_and_Hints_to_write_engineering_resea rch_paper [4] McMillan, K., & Weyers, J. D. B. (2010). How to Write Dissertations & Project Reports. Prentice Hall. https://books.google.co.in/books?id=x_5JPgAAC AAJ [5] Silyn-Roberts, H. (2012). Writing for science and engineering: Papers, presentations and reports. Newnes. https://books.google.com/books?hl=en&lr=&id=g Y64F4w8KuMC&oi=fnd&pg=PP1&dq=++Heath er+Silyn- Roberts,Writing+for+Science+and+Engineering:+ Papers,+Presentations,+and+Reports.+Oxford:+B utterworthHeinemann,+2000.&ots=Eaqed- Sl_5&sig=BfgsCxYVfZb8IYkT6BX95sWHLRo the engineering engineer. Wiley. paper. research afore-mentioned The abbreviations should be Copyright © 2020 TutorsIndia. All rights reserved d 3