1 / 7

CTC Machine Logix using JMRI/PanelPro

CTC Machine Logix using JMRI/PanelPro. Dick Bronson - RR-CirKits, Inc. Other Clinics in this series: Introduction to Layout Control with JMRI/PanelPro Repeated 4:00 PM, Friday, July 10 th. CTC Logix. CTC Logix This is the panel we have created so far. CTC Logix. CTC Logix

tulia
Download Presentation

CTC Machine Logix using JMRI/PanelPro

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CTC Machine Logixusing JMRI/PanelPro Dick Bronson - RR-CirKits, Inc. • Other Clinics in this series: • Introduction to Layout Control with JMRI/PanelPro Repeated 4:00 PM, Friday, July 10th

  2. CTC Logix • CTC Logix • This is the panel we have created so far.

  3. CTC Logix • CTC Logix • This is the panel we have created so far. • Create a Logix IX3:RSC (Plant 3: Right Stick Control) A 'stick' relay is one that maintains its position by contacts on itself. I.e. Once it is triggered it stays activated until some different action releases it. We will simulate this by using one conditional to set it, and a different conditional to release it.

  4. CTC Logix • CTC Logix • This is the panel we have created so far. • Create a Logix IX3:RSC (Plant 3: Right Stick Control) A 'stick' relay is one that maintains its position by contacts on itself. I.e. Once it is triggered it stays activated until some different action releases it. We will simulate this by using one conditional to set it, and a different conditional to release it.

  5. CTC Logix • CTC Logix • The first one is simple. If the traffic simulator switch is turned 'On' it is set.

  6. CTC Logix • CTC Logix • The first one is simple. If the traffic simulator switch is turned 'On' it is set. • Now create the second conditional 3:RSC Release

  7. CTC (Panel) • What we have covered so far: • Placing signals on a panel. • Simple Panel Logic and sounds. • Where we are going next: • CTC Panel Logix (09-8 CTC-Logix)

More Related