How Do Drip Irrigation Systems Work In Australia

1. How Do Drip Irrigation Systems Work In Australia? Crops have their water requirements to grow. Relying on rain is not the viable solution to great higher returns on investment. Therefore, innovative methods of applying artificial water to crops were invented. To pick one of the best Irrigation system supplies Australia, the decision should be based on the crop and field conditions. In drier regions, much care is needed regarding the nutrient and water saving properties of the irrigation system. One such method is drip irrigation which is perfect for the topographies in Australia. What is drip irrigation system? The drip irrigation system is an innovative method to irrigate only the roots and not the surrounding soil. Also known as a micro-watering system, the system consists of a network of dripper lines and emitters that slowly release water. The pipes are installed under the soil or exactly on top to let the emitters trickle directly on the roots. What are the applications of drip irrigation systems? The drip irrigation system is a cost saving option to meet the growing requirements of crops and it is suitable for both agricultural and domestic use. Use it for field crops, vegetables, vineyards, greenhouse crops, lawns, flower beds or vertical gardens, the water saving irrigation system would work remarkably. Be it soiled or soilless media, be it a flat or sloping terrain, the low pressure drip irrigation system is the ideal choice to save energy and water.

2. What are the benefits of using drip irrigation? The sustainable irrigation method is widely popular in regions with water scarcity. You can also use recycled or treated water for irrigation purposes only by using the drip irrigation system because regulations don’t permit spraying treated water that fails to meet the water standard in the air. Drip irrigation is suitable for Melbourne, Perth, Canberra and other drier regions in the country. It directly drips water on the roots, which means only the right amount of water is going to be used with zero wastage. You don’t even have to spray fertilisers anymore and save cost on fertilisers as well. Use a liquid fertiliser and pump it into the system to evenly distribute moderate amounts of fertilisers without any wastage. Where to find the parts for drip irrigation systems in Australia? For drip irrigation systems, you would need a pressurised water source, a primary filtration system, pressure control valves, distribution lines, emitters or poly tube drip tapes. For fertiliser requirements, you can also add a chemical injection tank and a secondary filter right before the main line divides into sub line and drippers. There are numerous features and variations of the above mentioned accessories. Selection of the right emitter, the right drip line and the right pressure control valve is very important to maintain the efficiency of the entire system. The right products are picked on the basis of the crop requirements and water quality. For instance, some emitters are pressure compensating and some are non-pressure compensating, if the yield requires consistent flow maintenance then investing in pressure compensating emitters is the right choice. You can find these parts, accessories and other supplies at Think Water. It is a recognized name for branded supplies of Irrigation Australia. They stock the world’s most advanced drip irrigation systems Perth, Melbourne, and 30+ other stores in the country.