Download
1 / 10
130 likes | 167 Views
In this PDF, We have given you the details about drip irrigation and how you can install drip irrigation in less money and what will be the steps that you need to follow before and after drip irrigation installation. We have given you the full details which anyone could easily follow to install drip irrigation. Also, we have mentioned all the benefits of drip irrigation. Read the full pdf for more and better information and share this info with everyone.
E N D
ULTIMATE CONSTRUCTION DRIP IRRIGATION HOW TO INSTALL DRIP IRRIGTION
Drip Irrigation is of the utmost importance when we talk about agriculture and is one of the ancient technologies that is continued to be used and will be used forever. There has been a lot of advancement in recent years that have taken the irrigation system to a higher level. One such progress is the drip irrigation system. It is considered to be an efficient way of watering plants.
It is believed that an ordinary sprinkler that is installed in a field can on an average cover about 80% of the area and provide water supply. In contrast, the drip irrigation system can provide about 90% efficiency in irrigating the plants. Also, these systems stand out as an inexpensive method of supplying water to the plants. Also, this system is easy to install and can be deployed with minimal errors and flaws. So if you are someone planning for a DIY adventure, here is how you can install the drip irrigation system in your backyard:
HAVE A PROPER PLAN IN MIND If you are trying out a micro- irrigation system for the first time, make sure that you start simple. Thus for installation of a drip irrigation system, you need to have a proper layout or sketch on how you are getting it installed.
Make a connection with an outdoor faucet You need to further insert the vacuum breaker in the pressure regulator, which will prevent the unwanted water from entering back into the supply lines. The filter should be further attached to the pressure regulator, and the whole assembly should be made complete.
Tubing Now an unperforated tube should be connected with the hose bib. Further making use of barbed connectors, the roll of the tube should be combined with the emitters. If you are not much confident about the same, you can call for the Landscaping Companies in San Antonio to provide you assistance.
Installation of ground stakes When you have correctly installed the tunes and have got it fixed in the proper position, make use of plastic ground stakes to clasp it in a downwards direction. Make sure that the hooks that are present at the topmost part of the stakes properly fit the tube.
Lay down the tubing After completing these steps, you can position the loops around various trees. You can also make use of a hole puncher to make half-inch hole for the tube from where the loop will initiate. Further, you can also insert a tee connector inside.
Close the tubes Once you have attained success inadequately setting up the drip system, make sure that you flush off the dirt present over the tubes. After this, you need to close the end of the tubes so that it is held in its crimp position.
