Understanding the Basics of Shell and Tube Heat

Aug 19, 2025

0 likes | 1 Views

Heat exchangers play a crucial role across industries by efficiently transferring heat from one medium to another. It offers various benefits, including high efficiency, versatility, and low maintenance. Read our latest blog for understanding the basics of shell and tube heat exchangers.<br>

thermosag

Download Presentation

Understanding the Basics of Shell and Tube Heat

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

Shell and Tube Heat Exchangers

Shell and Tube Heat Exchangers. Goals: By the end of today’s lecture, you should be able to: describe the common shell-and-tube HE designs draw temperature profiles for parallel and counter-current flow in a shell-and-tube HE

1.1k views • 33 slides

Baffling in SHELL-AND-TUBE HEAT EXCHANGERS

460 views • 16 slides

2-4 Shell and Tube Heat exchanger

Outline. 2-4 Shell and tube heat exchangerWhy we use it ?Problem 8.1. engineering-resource.com. Problem Statement. 33,114 lb/hr of n-butyl alcohol at 210 0F is to be cooled to 105 0F using water from 95 to 115 0F. Available for the purpose is a 19 in. ID, two- pass shell exchanger with 204 tubes

1.49k views • 35 slides

Shell and tube heat exchanger

Done By Moh’d Saad Jalmood To Dr. Malek Al Ahmed. Shell and tube heat exchanger. HEADING. What’s a shell and tube heat exchanger? How dose it work ? Common types of shell and heat exchangers Some Pictures The END !!. What’s a Shell and Tube Heat Exchanger ??!.

776 views • 22 slides

Thermo-Hydraulic Analysis of SHELL-AND-TUBE HEAT EXCHANGERS

Thermal Analysis of Heat Exchanger. Known as heat exchanger specification problems and their solutions. These are rating', design', and selection'. . Rating Analysis. The rating problem is evaluating the thermo-hydraulic performance of a fully specified exchanger. The rating program determines:

612 views • 18 slides

Shell-and-Tube Heat Exchangers

Shell-and-Tube Heat Exchangers. Choose of the right TEMA type and decide which stream goes in the tubes. Lecture series. Introduction to heat exchangers Selection of the best type for a given application Selection of right shell and tube Design of shell and tube . Contents.

1.3k views • 43 slides

Selecting Tube Inserts for Shell-and-Tube Heat Exchangers

Selecting Tube Inserts for Shell-and-Tube Heat Exchangers. Group 4: Daniel Ehlers David Ehlig Erik Maki Darren Finney Tasnim Mohamed. http://brandguide.tamu.edu/downloads/logos/TAMU-logos-rgb/TAM-Logo/TAM-Logo.png. http://www.jscengineers.com/wp-content/uploads/2011/10/DayRefinery.jpg.

1.18k views • 41 slides

Shell and Tube Heat Exchanger

Shell and Tube Heat Exchanger. Frank Faulkenberg Jimmy Huser John Snodgrass Eric Bush David Giles. ME 414: Thermal Fluids.

628 views • 25 slides

Operation of shell and tube heat exchangers

Done by: Keith Goh 3S1 (14) Ng Soon Zhou 3S1 (23) Xiong Xingyu 3S1 (30). Operation of shell and tube heat exchangers. Content. Operations. Two fluids, of different starting temperatures, flow through the heat exchanger. Operation. Operation. Shell and Tube. Shell and Tube.

466 views • 19 slides

SHELL AND TUBE HEAT EXCHANGER

SHELL AND TUBE HEAT EXCHANGER. SHELL AND TUBE HEAT EXCHANGER. With respect to tube layout in the tube bundle, the tubes are commonly laid out on a square pattern or on a triangular pattern .

602 views • 12 slides

Shell-and-Tube Heat Exchangers

1.76k views • 43 slides

Shell-and-Tube Heat Exchangers

Shell-and-Tube Heat Exchangers. Introduction to Heat Exchanger. A heat exchanger can be defined as any device that transfers heat from one fluid to another or from or to a fluid and the environment. Whereas in direct contact heat exchangers, there is no intervening surface between fluids

1.53k views • 31 slides

DESIGN OF SHELL AND TUBE HEAT EXCHANGER

DESIGN OF SHELL AND TUBE HEAT EXCHANGER. BY-RAHUL OMAR 0616651020 B.TECH.F(CH). Heat Exchanger Includes. Shell Tubes Working fluids. Heat Exchanger Shell. More expensive to manufacture than tubes Material. Heat Exchanger Tubes. Number of tubes Tube wall thickness

624 views • 9 slides

Advantages of coiled flow inverter over shell and tube heat exchanger

This study addresses the comparison of CFI over shell and tube heat exchanger. Helical coils have been used in place of baffles as well as of tubes by which, cost is decreased for the same heat exchanger. Normal CFI gives higher heat transfer rates, heat transfer coefficient and less pressure drop up to certain range of Reynolds no. Although everything goes in favor of CFI but simultaneously it has a drawback that at higher Reynolds no. its thermal characteristics get down.

86 views • 2 slides

Shell and Tube Heat Exchanger

China SS Shell and Tube Heat Exchanger Producer Provides 304 SS Shell and Tube Heat Exchanger, 500mm, 1 Pass - 4 Pass Tube Length 4500mm - 6000mm. Name: Heat Exchanger. Design: Shell and Tube. Material: SS304. Nominal Diameter: 500mm. Tube Diameter: Φ20. Tube Pass: 1, 2, 4. Tube Length: 4500mm, 6000mm. What is the shell and tube heat exchanger? A Shell and Tube Heat Exchanger is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. The Shell and Tube Type Heat Exchanger consists of two sides for two different media. The Shell Side fluid flows on the outside of the tubes while the fluid is contained by the shell where it is diverted by baffles or tube supports that also carry the weight of the tubes. The Tube Side media flows inside the tubes while the media is diverted by the heat exchanger head which is located on the end into two or four passes or circuits. website: http://www.dfctank.com

76 views • 1 slides

2-4 Shell and Tube Heat exchanger

2-4 Shell and Tube Heat exchanger. Outline. 2-4 Shell and tube heat exchanger Why we use it ? Problem 8.1. Problem Statement.

860 views • 35 slides

The Family of Shell and Tube Heat Exchangers

The Family of Shell and Tube Heat Exchangers. P M V Subbarao Professor Mechanical Engineering Department I I T Delhi. Family members with Simple Geometrical Features for Complex Fluid Flow…. Fixed tube sheet. U-Tube STHE. Floating Head STHE TEMA S. Floating Head STHE TEMA T.

235 views • 19 slides

An overview of shell and tube heat exchangers

A shell and tube heat exchanger is used in industries to efficiently transfer heat from one medium to another without having them make contact with each other.

133 views • 4 slides

Shell and Tube Heat Exchanger | Stalwart International

Stalwartu2019s experienced team of engineers have been providing solutions for a wide spectrum of heat exchangers used in various process conditions.

123 views • 7 slides

Shell and tube heat exchangers

AMETEK Fluoropolymer shell and tube heat exchangers are used mostly in the chemical processing industry for heating, cooling, condensing, and evaporating highly corrosive liquids and gases. Sulfuric Acid is the chemical most used with AMETEK FPP heat exchangers. The process of making sulfuric acid can vary, but any company dealing with the manufacturing process has a high potential for the use of a fluoropolymer heat exchanger in their process. Other Acids commonly requiring fluoropolymer heat exchangers are Hydrochloric, Nitric and Hydrofluoric Acids. Another chemical manufacturing industry fluoropolymer heat exchangers are used in is the Chlor-Alkali manufacturing process. The Chlor-Alkali process produces chlorine as well as sodium hydroxide, ammonia hydroxide and hydrogen peroxide through an electrolytic cell. Once the process is complete, the chlorine must be cooled and dried, and the caustic must be condensed. Other applications ideal for fluoropolymer shell and tube heat exchangers is manufacturing of bromine, electronic chemical market which produces ultra-high purity acids for the SEMI conductor industry and Lead Acid Battery industry which uses sulfuric acid in the manufacture of battery paste.

168 views • 2 slides

Shell and Tube Heat Exchanger HYPERLINKED Brochure

SHELL AND TUBE Heat exchangers that use a shell and tube design have a cylindrical shell with tubes inside. Both fluids move, one through the tubes themselves (the tube-side fluid) and one outside of them (the tube-side fluid) (the shell-side fluid). As a result of their durability and superior heat transfer efficiency, they find widespread application across a number of different industries. High-pressure and high-temperature environments are tailor-made for shell and tube heat exchangers. Heat can be transmitted between fluids directly, as in a liquid-to-liquid heat exchanger, or through a

76 views • 2 slides

Application and Advantages of Shell and Tube heat exchanger

Stalwart International provides cost-effective solutions for a wide range of shell and tube heat exchangers, ensuring optimal performance and process control.

37 views • 8 slides

More Related