Shell and Tube Heat Exchangers

Shell and Tube Heat Exchangers. Goals: By the end of today’s lecture, you should be able to: describe the common shell-and-tube HE designs draw temperature profiles for parallel and counter-current flow in a shell-and-tube HE

1.09k views • 33 slides

Baffling in SHELL-AND-TUBE HEAT EXCHANGERS

457 views • 16 slides

2-4 Shell and Tube Heat exchanger

Outline. 2-4 Shell and tube heat exchangerWhy we use it ?Problem 8.1. engineering-resource.com. Problem Statement. 33,114 lb/hr of n-butyl alcohol at 210 0F is to be cooled to 105 0F using water from 95 to 115 0F. Available for the purpose is a 19 in. ID, two- pass shell exchanger with 204 tubes

1.49k views • 35 slides

Shell and tube heat exchanger

Done By Moh’d Saad Jalmood To Dr. Malek Al Ahmed. Shell and tube heat exchanger. HEADING. What’s a shell and tube heat exchanger? How dose it work ? Common types of shell and heat exchangers Some Pictures The END !!. What’s a Shell and Tube Heat Exchanger ??!.

772 views • 22 slides

Thermo-Hydraulic Analysis of SHELL-AND-TUBE HEAT EXCHANGERS

Thermal Analysis of Heat Exchanger. Known as heat exchanger specification problems and their solutions. These are rating', design', and selection'. . Rating Analysis. The rating problem is evaluating the thermo-hydraulic performance of a fully specified exchanger. The rating program determines:

611 views • 18 slides

Fin Tube Heat Exchangers : Condensers Evaporators

Introductory Remarks. Automobile, Process, Refrigeration and A/c and Aerospace industries require small size and light weight heat exchanger devices.The size of heat exchanger is very large in those applications where gas is a medium of heat exchange.Continuous research is focused on development

1.49k views • 74 slides

Shell-and-Tube Heat Exchangers

Shell-and-Tube Heat Exchangers. Choose of the right TEMA type and decide which stream goes in the tubes. Lecture series. Introduction to heat exchangers Selection of the best type for a given application Selection of right shell and tube Design of shell and tube . Contents.

1.29k views • 43 slides

Selecting Tube Inserts for Shell-and-Tube Heat Exchangers

Selecting Tube Inserts for Shell-and-Tube Heat Exchangers. Group 4: Daniel Ehlers David Ehlig Erik Maki Darren Finney Tasnim Mohamed. http://brandguide.tamu.edu/downloads/logos/TAMU-logos-rgb/TAM-Logo/TAM-Logo.png. http://www.jscengineers.com/wp-content/uploads/2011/10/DayRefinery.jpg.

1.17k views • 41 slides

Shell and Tube Heat Exchanger

Shell and Tube Heat Exchanger. Frank Faulkenberg Jimmy Huser John Snodgrass Eric Bush David Giles. ME 414: Thermal Fluids.

627 views • 25 slides

Operation of shell and tube heat exchangers

Done by: Keith Goh 3S1 (14) Ng Soon Zhou 3S1 (23) Xiong Xingyu 3S1 (30). Operation of shell and tube heat exchangers. Content. Operations. Two fluids, of different starting temperatures, flow through the heat exchanger. Operation. Operation. Shell and Tube. Shell and Tube.

466 views • 19 slides

SHELL AND TUBE HEAT EXCHANGER

SHELL AND TUBE HEAT EXCHANGER. SHELL AND TUBE HEAT EXCHANGER. With respect to tube layout in the tube bundle, the tubes are commonly laid out on a square pattern or on a triangular pattern .

601 views • 12 slides

Shell-and-Tube Heat Exchangers

Shell-and-Tube Heat Exchangers. Choose of the right TEMA type and decide which stream goes in the tubes. Lecture series. Introduction to heat exchangers Selection of the best type for a given application Selection of right shell and tube Design of shell and tube. Contents.

1.74k views • 43 slides

Shell-and-Tube Heat Exchangers

Shell-and-Tube Heat Exchangers. Introduction to Heat Exchanger. A heat exchanger can be defined as any device that transfers heat from one fluid to another or from or to a fluid and the environment. Whereas in direct contact heat exchangers, there is no intervening surface between fluids

1.53k views • 31 slides

DESIGN OF SHELL AND TUBE HEAT EXCHANGER

DESIGN OF SHELL AND TUBE HEAT EXCHANGER. BY-RAHUL OMAR 0616651020 B.TECH.F(CH). Heat Exchanger Includes. Shell Tubes Working fluids. Heat Exchanger Shell. More expensive to manufacture than tubes Material. Heat Exchanger Tubes. Number of tubes Tube wall thickness

623 views • 9 slides

Shell And Tube Heat Exchangers Market Production And Revenue Analysis Report 2022

The shell and tube heat exchangers market is expected to portray significant growth in forthcoming period.

115 views • 5 slides

Shell and Tube Heat Exchanger

China SS Shell and Tube Heat Exchanger Producer Provides 304 SS Shell and Tube Heat Exchanger, 500mm, 1 Pass - 4 Pass Tube Length 4500mm - 6000mm. Name: Heat Exchanger. Design: Shell and Tube. Material: SS304. Nominal Diameter: 500mm. Tube Diameter: Φ20. Tube Pass: 1, 2, 4. Tube Length: 4500mm, 6000mm. What is the shell and tube heat exchanger? A Shell and Tube Heat Exchanger is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. The Shell and Tube Type Heat Exchanger consists of two sides for two different media. The Shell Side fluid flows on the outside of the tubes while the fluid is contained by the shell where it is diverted by baffles or tube supports that also carry the weight of the tubes. The Tube Side media flows inside the tubes while the media is diverted by the heat exchanger head which is located on the end into two or four passes or circuits. website: http://www.dfctank.com

75 views • 1 slides

Large Shell Heat Exchangers

Large Shell Heat Exchangers. P M V Subbarao Professor Mechanical Engineering Department I I T Delhi. An Engineering Solution to the Crisis of Massive Volume Requirements… A Complex Blend of Simple Ideas…. Idea for Large Capacity for Ordinary Demand.

177 views • 14 slides

2-4 Shell and Tube Heat exchanger

2-4 Shell and Tube Heat exchanger. Outline. 2-4 Shell and tube heat exchanger Why we use it ? Problem 8.1. Problem Statement.

847 views • 35 slides

The Family of Shell and Tube Heat Exchangers

The Family of Shell and Tube Heat Exchangers. P M V Subbarao Professor Mechanical Engineering Department I I T Delhi. Family members with Simple Geometrical Features for Complex Fluid Flow…. Fixed tube sheet. U-Tube STHE. Floating Head STHE TEMA S. Floating Head STHE TEMA T.

233 views • 19 slides

An overview of shell and tube heat exchangers

A shell and tube heat exchanger is used in industries to efficiently transfer heat from one medium to another without having them make contact with each other.

131 views • 4 slides

Shell and Tube Heat Exchanger | Stalwart International

Stalwartu2019s experienced team of engineers have been providing solutions for a wide spectrum of heat exchangers used in various process conditions.

121 views • 7 slides

Shell and tube heat exchangers

AMETEK Fluoropolymer shell and tube heat exchangers are used mostly in the chemical processing industry for heating, cooling, condensing, and evaporating highly corrosive liquids and gases. Sulfuric Acid is the chemical most used with AMETEK FPP heat exchangers. The process of making sulfuric acid can vary, but any company dealing with the manufacturing process has a high potential for the use of a fluoropolymer heat exchanger in their process. Other Acids commonly requiring fluoropolymer heat exchangers are Hydrochloric, Nitric and Hydrofluoric Acids. Another chemical manufacturing industry fluoropolymer heat exchangers are used in is the Chlor-Alkali manufacturing process. The Chlor-Alkali process produces chlorine as well as sodium hydroxide, ammonia hydroxide and hydrogen peroxide through an electrolytic cell. Once the process is complete, the chlorine must be cooled and dried, and the caustic must be condensed. Other applications ideal for fluoropolymer shell and tube heat exchangers is manufacturing of bromine, electronic chemical market which produces ultra-high purity acids for the SEMI conductor industry and Lead Acid Battery industry which uses sulfuric acid in the manufacture of battery paste.

166 views • 2 slides