1 / 11

Design Solution

Design Solution. For a 35kW level II enclosure: 11 pieces are to be cut from received board Installed into walls/doors Installed above generator and around exhaust system. Insulation board dimensions. Cutting/Forming. Done with circular saws 57.5 feet of cutting per enclosure

tausiq
Download Presentation

Design Solution

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design Solution For a 35kW level II enclosure: • 11 pieces are to be cut from received board • Installed into walls/doors • Installed above generator and around exhaust system

  2. Insulation board dimensions

  3. Cutting/Forming Done with circular saws 57.5 feet of cutting per enclosure Ventilation is required to eliminate spread of dust

  4. Insulation of door panels

  5. Insulation of exhaust area

  6. Elimination of perforated steel

  7. Exhaust box installation Insulation block Small bolts Perforated steel

  8. Thickness will remain the same Thermal conductivity of expanded perlite: .85 Btu in/hr ft2 °F Thermal conductivity of mineral wool: 1.06 Btu in/hr ft2 °F Same thickness will be used Thermal insulation will improve

  9. Thermal conductivity heat flow rate thickness *Assuming a heat flow of 3000 Btu/hr area thermal conductivity ∆T = 735 °F • For mineral wool with k = 1.06 Btu in/hr ft2°F • ∆T = 590 °F

  10. Further Testing • Acoustical testing • Mock-up enclosure • Mechanical testing • Ability for material to withstand vibrations • Impact testing

More Related