1 / 16

Logical Clocks and Global State

Logical Clocks and Global State. Causal Relations between Events. Typical events in a distributed system execution of an instruction sending of a message receipt of a message happened before relation  between events A and B holds if

tasha
Download Presentation

Logical Clocks and Global State

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Logical Clocks and Global State

  2. Causal Relations between Events • Typical events in a distributed system • execution of an instruction • sending of a message • receipt of a message • happened before relation  between events A and B holds if • both A & B occur at the same process and A occurred before B • A is the sending of a message and B is the receipt of the same message • there exists event C such that AC and CB • if AB then A casually affects B • Events A & B are concurrent if neither A nor BA

  3. Lamport’s Logical Clocks • each process Pi maintains a counter Ci and assigns to each event E a timestamp t(E) equal to the value of Ci • the happened before relation between events can be realized if the following conditions hold • for all events A & B in Pi AB implies Ci(A) < Ci(B) • if A is the sending of a message by Pi and B is the receipt of the same message by Pj then Ci(A) < Cj(B)

  4. Lamport’s Logical Clocks • assume that Pi timestamps each message M it sends with Ci • The  relationship can be achieved if the counters Ci are updated as follows • between any two successive events at Pi, Ci is incremented by a positive value d • any process Pj, upon receiving a message with timestamp t, sets Cj = max(Cj, t+d) •  is a partial temporal ordering of events which could be augmented to a total temporal ordering of events by using a total ordering of processes • Theorem. AB implies that C(A) < C(B) but the reverse is false

  5. Vector Clocks (Fidge and Mattern) • Assume N processes Pi with each process having a counter Ci that is a vector of N simple counters • Ci[i] is the value of Pi’s Lamport clock • Ci[j] is Pi’s best guess of the value of Pj’s Lamport clock • Ci[j] indicates the time of the last event at Pj that is known (by Pi) to have happened before the time Ci[i] at Pi • The vector clock at Pi is updated as follows • Ci[i] is incremented by d>0 between any two consecutive events at Pi • upon receiving a message with vector timestamp T at Pi Ci[j] = max(Ci[j], T[j]) for all j=1,2,…,N

  6. Vector Clocks & Temporal Ordering of Events • For any two vector clocks Ci[i] >= Cj[i] (why?) • Compare vector clocks component-wise and define Ci = Cj if Ci[k] = Cj[k] for k=1,2,…,N Ci <= Cj if Ci[k] <= Cj[k] for k=1,2,..,N Ci < Cj if Ci <= Cj and Ci not equal to Cj • two events A & B are concurrent if neither C(A) < C(B) nor C(B) < C(A) • Theorem. AB if and only if C(A) < C(B) • Vector clocks provide us with a total temporal ordering of events

  7. Causal Ordering of Messages • Problem • order the Send and Receive of messages such that Send(M1)  Send(M2) implies Receive(M1) Receive(M2) for any two messages M1 and M2 • Applications: replica management, monitoring distributed computations, simplifying distributed algorithms, etc • Solution idea: • upon arrival of a message at a process, buffer (delay delivery) the message until the message immediately preceding it is delivered

  8. Birman-Schiper-Stephenson Protocol • Assumes broadcast communication channels that do not loose or corrupt messages • Use vector clocks to “count” #messages (i.e. set d=1) • Pi upon receiving a message M with timestamp T from Pj buffers the message until • Pi has received all messages send by Pj before sending M Ci[j] = T[j]-1 • Pi received all messages that Pj received before sending M Ci[k] >= T[k], k=1,2,..,N, k <> j • Schipper-Eggli-Sandoz solves the problem without broadcast channels

  9. Global State • Channels can not record their state • Definitions • LSi: local state at Si (as well the event of recording this local state) • send(M) and rec(M) the send and receive events of a message M from Si to Sj • time(E) the timestamp of event E • send(M) in LSi iff time(send(M)) < time(LSi) • rec(M) in LSj iff time(rec(M)) < time(LSj) • transit(LSi, LSj) = set of messages M from Si to Sj such that send(M) in LSi and rec(M) not in LSj • inconsistent(LSi,LSj) = set of messages M from Si to Sj such that rec(M) in LSj and send(M) not in LSi

  10. Consistent Global State • Global state of a system with N sites consists of the set of the local states LSi, i=1,2,…,N • A global state is • consistent if and only if for every pair of local states LSi, LSj there are no inconsistent messages inconsistent(LSi,LSj) = empty • transitless iff transit(LSi,LSj) = empty for every pair of local states LSi, LSj • strongly consistent if it is consistent and transitless

  11. Chandy-Lamport Protocol • Assumes FIFO communication channels • recording of global state uses a special message (the marker) • markers delineate the messages in a FIFO channel that need to be included in the local state recorded at the receiving end of the channel • whenever a process wants to initiate recording of global state it creates a new marker • more than one process can initiate global state recording

  12. Chandy-Lamport Protocol • Rule 1: P sends the marker • P records its local state (together with the state of its channels) • P sends the marker to all outgoing channels on which the marker has not been sent yet before sending anymore messages on these channels • Rule 2: P receives the marker along channel C • If P has not recorded its state yet then • record the state of C as empty and follow Rule 1 • else • record the state of C as the sequence of messages received between time(local-state-of-P) and time(marker-received)

  13. Properties of Chandy-Lamport Global State • Recorded global state may be phantom • So: global state when protocol starts • Sf: global state when protocol completes • Sr: global state recorded by the protocol • E: sequence of actions that take the system from So to Sf • Theorem. There exists a permutation E’ of E such that a prefix of E’ takes the system from So to Sr and the remaining actions in E’ take the system from Sr to So • Global state recorded by Chandy-Lamport’s protocol is useful in inferences about persistent system properties

  14. Huang’s Termination Detection Protocol • Processes are idle or active • idle processes become active by receiving a computation message • protocol messages are control messages • one process is the controlling agent Pcand monitors the system • initially all processes, but the controlling agent, are idle • the controlling agent has a weight 1 and all other processes have weight 0 • each active process has weight > 0

  15. Huang’s Termination Detection Protocol • Messages carry a weight • B(dw): computation message with weight dw>0 • C(dw): control message with weight dw>0 • Protocol • Any active process Pi may initiate a computation at a process Pj by selecting dw>0, setting W(Pi) = W(Pi) - dw, and then sending B(dw) to Pj • Any process Pj upon receiving B(dw) sets W(Pj) =W(Pj)+dw • An active process Pi becomes idle by sending C(W(Pi)) to the controlling agent Pc and setting W(Pi)=0 • Controlling agent Pc upon receiving C(dw) sets W(Pc) = W(Pc) + dw • If W(Pc)=1 the computation has terminated

  16. Correctness of Huang’s Protocol • Correctness • the sum of the weights among • active processes • messages in transit • controlling agent is always equal to 1 • total weight among idle processes is 0 • detects all terminations correctly in finite time as long as • messages are not lost or corrupted • message delays are finite

More Related