1 / 10

Micromegas chamber 1m² design

Micromegas chamber 1m² design. W based HCAL prototype meeting 2010, March 2nd. 1m² Micromegas chamber. External frame. Top plate (made of W). 6 ASU. Vetronit mask (holes machined for electronic devices to be inserted). Electronic boards. Bottom plate (made of W).

Download Presentation

Micromegas chamber 1m² design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Micromegas chamber 1m² design W based HCAL prototype meeting 2010, March 2nd

  2. 1m² Micromegas chamber External frame Top plate (made of W) 6 ASU Vetronit mask (holes machined for electronic devices to be inserted) Electronic boards Bottom plate (made of W)

  3. External dimensions – option 1 1160 mm OPTION 1: Large plates with holes 999 mm Electronic boards (inter_DIF & DIF) 1024 mm

  4. External dimensions – option 1 OPTION 1: Large plates with holes Space and holes to hang the chamber (rail)

  5. External dimensions – option 2 OPTION 2: Smaller plates 1160 mm 999 mm 1004 mm 1024 mm

  6. External dimensions – option 2 OPTION 2: Smaller plates • Reduce the plates size • reduce the volume without detection • get the active area as close as possible to the chamber overall dimensions Insertion of the chamber like a cassette

  7. 1m² Micromegas chamber 26.8 mm 965.6 mm 16.7 mm ACTIVE AREA = 965.6mm x 970.4 mm 970.4 mm 16.7 mm Picture with option 1 plates ( BUT the active area remains unchanged for option 2 ) 26.8 mm

  8. 1m² Micromegas chamber Top plate removed 6 ASU (pads side)

  9. 1m² Micromegas chamber [ Chamber cross section ] PCB + bulk (1.5 mm) W plate (2mm) + copper foil (5 μm) Internal spacer 5mm 3 mm drift gap Machined mask (3mm) W plate (2mm) 2mm Chamber total thickness = 2 + 3 + 1.5 + 3 + 2 = 11.5 mm

  10. 1m² Micromegas chamber Dimensions of the electronic boards DIF (1.5mm thick) Inter_DIF (1.6mm thick) 130 mm 999 mm 13.5 mm 1160 mm 11.5 mm 9 mm 3 mm 5 mm

More Related