1 / 28

Instrument Design/Development Status and System Performance

Instrument Design/Development Status and System Performance. PACS Instrument Overview Poglitsch MPE. Focal Plane Footprint. 32 x 16 pixels 6.4” x 6.4”. 64 x 32 pixels 3.2” x 3.2”. Instrument Concept. Imaging photometry

tana
Download Presentation

Instrument Design/Development Status and System Performance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Instrument Design/Development Status andSystem Performance • PACS Instrument Overview • Poglitsch • MPE PACS Instrument Overview

  2. Focal Plane Footprint 32 x 16 pixels 6.4” x 6.4” 64 x 32 pixels 3.2” x 3.2” Instrument Concept • Imaging photometry • two bands simultaneously (60-85 or 85-130 µm and 130-210 µm) with dichroic beam splitter • two filled bolometer arrays (32x16 and 64x32 pixels, full beam sampling) • point source detection limit ~3 mJy (5s, 1h) • Integral field line spectroscopy • range 57 - 210 µm with 5x5 pixels, image slicer, and long-slit grating spectrograph (R ~ 1500) • two 16x25 Ge:Ga photoconductor arrays (stressed/unstressed) • point source detection limit 2…8 x10-18 W/m2 (5s, 1h) PACS Instrument Overview

  3. Observing Modes • Combinations of instrument modes and satellite pointing modes • Instrument modes: • dual-band photometry • single-band photometry • line spectroscopy • observation of individual lines • range spectroscopy • observation of extended wavelength ranges • Pointing modes: • stare/raster/line scan • with/without nodding PACS Instrument Overview

  4. FPU Cold FocalPlaneUnit DEC/MEC 1 BlueGe:GaArray &CRE MPE/ANTEC/IMEC MEC I/F-Module BOL/COOL BOL/BAU BlueBolArray &Read-out CEA BlueBol BAU BOL 1 Module DSP Module RedBolArray &Read-out CEA RedBol BAU BOL 2 Module BlueDEC Module CEA RedGe:GaArray &CRE MPE/ANTEC/IMEC Cooler Control Base/PSU SPU nominal DPU nominal CEA CSL-Liege IAC-Tenerife/TU-Wien 0.3K Cooler CEA DEC/MEC 2 DPU redundant SPU redundant MEC I/F-Module Redundant Grating Assy CSL-Liege IFSI-ROME IAC-Tenerife/TU-Wien DSP Module Redundant Chopper Assy MPIA 2FilterWheels KT RedDEC Module Base/PSU Redundant 2BlackBodies KT Warm Interconnecting Harness KT/MPE CSL-Liege Instrument Overview and Subsystem Responsibilities PACS Instrument Overview

  5. DPU • Single point of communication with satellite • TC/TM • reception and execution or distribution of commands • transfer of science and HK data • autonomy functions PACS Instrument Overview

  6. SPU • Data compression • lossy part (average / fit) • lossless part (redundancy removal) • Must reduceraw data rate from up to3.6 Mbit/s to ~120 kbit/s PACS Instrument Overview

  7. DECMEC • Photoconductor operation and readout • CRE supply and timing/control • detector bias • signal acquisition • FPU mechanisms control/ synchronization • chopper • filter wheels • grating • BOLC data acquisition and control • Communication with SPU and DPU PACS Instrument Overview

  8. BOLA / BOLC BOLA • 160-channel JFET buffer at ~100 K BOLC • Acquisition of signals from 160 multiplexers in bolometer arrays • Sequencer for bolometer operation / readout • Control of 300 mK cooler • Transfer of digitized data to DECMEC PACS Instrument Overview

  9. FPU Cold FocalPlaneUnit Photometer Optics BlueGe:GaArray &CRE MPE/ANTEC/IMEC Filter Wheel I Slicer Optics Blue Bolometer BlueBolArray &Read-out CEA 0.3 K Cooler RedBolArray &Read-out CEA Grating Red Bolometer Grating Drive RedGe:GaArray &CRE MPE/ANTEC/IMEC Encoder sGeGaDetector Red Spectrometer 0.3K Cooler CEA Spectrometer Optics Chopper Grating Assy CSL-Liege Calibrator I and II Filter Wheel II Chopper Assy MPIA Calibrator Optics GeGa Detector Blue Spectrometer 2 FilterWheels KT 2 Calibrators KT Entrance Optics KT/MPE FPU/Optics PACS Instrument Overview

  10. Design/Development Status of Technically Critical Components • Optics • FPU/Structure • Photoconductors, CRE • Bolometers • Chopper • Grating assembly • Warm electronics PACS Instrument Overview

  11. Optics • Design of FPU optics complete, manufacturing of mirror blanks started • Alignment plan exists; tolerancing partly done • Analyses (geometrical-optical, diffraction) done end-to-end for selected cases; coverage of parameter space (wavelength, chopper angle) to be improved in context of instrument calibration • Baffle design of FPU nearly finished; straylight analysis difficult • Calibration sources conceptual design achieved • Details from N. Geis PACS Instrument Overview

  12. FPU Status • Detailed design of FPU structure in final phase.Structural problems solved.First part (“top optics”) in manufacturing. • Delay for manufacturing from some interface problems and from late input • bolometer unit mounting interface • electrical distribution board design • detector array cable harness • filter mounts • Details from J. Schubert and D. Kampf PACS Instrument Overview

  13. PACS Instrument Overview 13

  14. Photoconductor Arrays • Environmental testing successful • Performance tests on both high and low-stress modules with TIA: QE looks ok (high-stress: >30%) • Design Changes • short-circuit “immunity” implemented in FM design • Manufacturing Status • QM completed – but FEE integration outstanding • FM in production • Problems • “pigtail” harness late and hard to fit in FPU • late readiness of FEEs • Details from H. Richter and D. Rosenthal PACS Instrument Overview

  15. Cryogenic Read-Out Electronics • CREs have undergone complete redesign over the last two years • Progress with new design from both, optimization of transistor geometry and of circuit design • CQM run ‘032001’ • design/layout improvement and local optimization of input stage • successfully tested by IMEC and by CSL, working at MPE • will be used for detector module tests at LENS • CQM run ‘102001’ • essentially integrator type _024 (as 032001) • evolutionary combination of additional features (4 Cint, increased dynamic range) • for integration into QM detector modules, dice delivery 11/2001 • Details from C. van Hoof PACS Instrument Overview

  16. CRE032001 Performance • Linearity : <3% non-linearity over >2V • Cross talk between channels: <1% full range • Noise, linearity, cross talk~ meet requirements • Tests of CREs with detectors still ahead (early ’02) PACS Instrument Overview 16

  17. Bolometer Arrays • Two complete “blue” arrays mounted in cryostat at LETI for optical characterization • Red arrays being assembled • Cold multiplexer/buffer noise (differential mode)< 1 µV/Hz1/2 • Detection efficiency 80%(calculated) across PACSspectral bands • Good tolerance to uncertaintyin background level shown bymodeling • Details from L. Rodriguez PACS Instrument Overview

  18. 3He Sorption Cooler • 300 mK cooler development on track, good margin for 46h operation • Details from L. Duband PACS Instrument Overview

  19. Chopper • Status QM • Manufacturing at MPIA started mid Oct 2001 • Qualification tests started January 2002 • Delivery to MPIA/MPE/KT planned for March 2002, but delayed due to pigtail delivery • Problems • Damage of flex pivots in lifetime model operation • Details from R. Hofferbert PACS Instrument Overview

  20. Grating • Diffraction Grating Sample received from Zumtobel GmbH (A), under evaluation Zeiss for FM manufacture as backup • Actuator ordered from TU Berlin after successful performance test at 4K • Position Sensor ordered from FARRAND after successful breadboard test of sensor at 4K • Bearings coatings and preload control under evaluation • Launch-lock prototype under fabrication • More information from E. Renotte PACS Instrument Overview

  21. Warm Electronics Development • BOLA • Mechanical design updated • Box thermal behavior modeling in progress • JFET modeling for effect of temperature on performance in progress • BOLC • Mechanical design BOLC updated (2 stacked boxes) • Analogue board prototype ready for performance test • Bolometer bias board (QM1) ready for design • “300mK” temperature control prototype designed • FPGA implementation of IEEE1355 under test at CSL • Most digital functions designed, except bolometer sequencer PACS Instrument Overview

  22. CRE 03/01 @ 4K Warm Electronics Development • DEC/MEC • DEC/MEC AVM Status • DSP and DEC simulator available / development on schedule • DEC/MEC EM Status • design and procurement ongoing, but validation with representative hardware pending on mechanism simulators availability from partners • DEC/MEC On-board Software Status • sequencer complete • communication 70% tested • mechanism control low-level S/W ~ 0% • MEC-to-DPU simulator completed: Virtuoso + OBS emulated on a PC • Successful operation of CRE with DEC prototype • low noise + good linearity PACS Instrument Overview

  23. Instrument Performance • Instrument Requirements • Photometer • Spectrometer • Instrument Model • Optical performance • Sensitivity budget • optical transmission • background • detector performance PACS Instrument Overview

  24. Photometer Performance Requirements • Image quality • blur: telescope limited • distortion: ±1 pixel; alignment: <1/3 pixel • Sensitivity (point source detection) • requirement: 5 mJy (5s), 1h of integration • goal: 3 mJy (5s), 1h of integration • Dynamic range • detection from 3 mJy to >1000 Jy (goal: 3000 Jy) • contrast of up to 1:500 in one field • Post-detection bandwidth • requirement: 0.5 - 5 Hz • goal: 0.05 - 5 Hz PACS Instrument Overview

  25. Spectrometer Performance Requirements • Image quality • blur: telescope limited • distortion: ±1 pixel; alignment: <1/4 pixel • Sensitivity (point source detection) • requirement: 3x10-18 W/Hz1/2 (5s), 1h of integration • goal: 2x10-18 W/Hz1/2 (5s), 1h of integration • Dynamic range • detection from ~1x10-18 W to >10-13 W • contrast of up to 1:100 in one field • Post-detection bandwidth • requirement: 5 Hz • goal: 10 Hz PACS Instrument Overview

  26. Optical Performance • Optical design fulfills requirements regarding • field of view • spatial sampling • distortion • geometrical spot sizes (Strehl ratio) • alignment • internal calibration capability • chopping • spectral coverage and resolution • transmission / diffraction losses • Details from N. Geis PACS Instrument Overview

  27. Parameters of PACS Instrument Model(Present Best Estimate) (a) Values for the photometry modes from 60-85 or 85-130 µm / 130-210 µm, respectively. (b) The formal transmission of >1 takes into account the acceptance solid angle of the photoconductor light cones / bolometer baffles which differs from the beam solid angle. PACS Instrument Overview

  28. Background, NEP, Spectroscopic and Photometric Sensitivity assumed detector QEs: 30% (spectroscopy); 80% (photometry) assumed detector NEPs: 5x10-18 W/Hz1/2 (spectroscopy); 10-16 W/Hz1/2 (photometry) • Performance requirements (or even goals) can be met PACS Instrument Overview

More Related