1 / 22

Code::Blocks Debugger Sample

Code::Blocks Debugger Sample. 開啟 Code::Blocks. 開新的 project. 2. GO. 1. 選這個. 下一步. 下一步. 1. 這裡記得要全英文，神馬桌面啦程設啦通通不可以. 2. 下一步. Finish. 開好專案了，來這裡把 code 打開或貼上. 把 Code 寫在這或是貼過來這. 我貼 !!!!!!!!!!!!!!!!!!!!!!!!!. 點出小紅點，直接用滑鼠在圖上的位置戳戳戳戳戳就可以了. 就是現在，呼叫 Debuger. 出來了 !!! 黃色 箭頭 停 再 傳說 中的 程式 進入 點.

sydnee-bennett
Download Presentation

Code::Blocks Debugger Sample

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Code::Blocks Debugger Sample

  2. 開啟Code::Blocks

  3. 開新的project

  4. 2. GO 1.選這個

  5. 下一步

  6. 下一步

  7. 1.這裡記得要全英文，神馬桌面啦程設啦通通不可以1.這裡記得要全英文，神馬桌面啦程設啦通通不可以 2. 下一步

  8. Finish

  9. 開好專案了，來這裡把code打開或貼上

  10. 把Code寫在這或是貼過來這

  11. 我貼!!!!!!!!!!!!!!!!!!!!!!!!!

  12. 點出小紅點，直接用滑鼠在圖上的位置戳戳戳戳戳就可以了點出小紅點，直接用滑鼠在圖上的位置戳戳戳戳戳就可以了

  13. 就是現在，呼叫Debuger

  14. 出來了!!! 黃色箭頭 停再 傳說中的 程式進入點

  15. 按幾下F7他就會跑阿跑阿的往下跑了

  16. 這邊可以設定想監看的變數

  17. 按下Add

  18. 嗯…

  19. 想看的都塞進來

  20. 1.原則上這邊就看的到了 2. 如果找不到左邊那個視窗，就來這裡把它打開

  21. 然後繼續F7就可以看到變數變化跟程式執行的狀況了然後繼續F7就可以看到變數變化跟程式執行的狀況了

More Related