1 / 1

Things To Remember While Using Complete Dewatering System In Bangalore

Every Constructional project needs a proper dewatering system. Care must be taken that the dewatering process is done in good, safe conditions. This document explains a few precautions to be taken during discharging and various other things to be kept in mind while using complete dewatering system in Bangalore and various other cities in India.

Download Presentation

Things To Remember While Using Complete Dewatering System In Bangalore

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Things to Remember While Using Complete Dewatering System in Bangalore Dewatering is referred to the process of groundwater or surface water removal from construction site. It is either done by evaporation techniques or by pumping. For the safety of workers and for easy excavation procedures; complete dewatering is necessary. There are many instances where carelessness towards water removal procedures leads to more serious issues like erosion. Precautions to be taken While Dewatering While using complete dewatering system, make sure that the water is discharged properly even if you are away from water bodies. When you are choosing a location (be it in Bangalore, Cochin or any other city) in order to discharge after a complete dewatering process, make sure to remember the following points; ➢ Ensure the water is not made to run down directly from slopes ➢ Avoid discharging water in areas that are subject to soil erosion. ➢ The channels being used during dewatering must be strong and it would be better if you have it protected by grass or vegetation. ➢ If the water is oily or has contamination in it, avoid discharging it directly. Steps must be taken to separate the oil/chemical immediately. ➢ Choose a location that has the groundwater at a medium or lower level. A water table that is very close to the surface may not be appropriate for dewatering procedures. ➢ Once you choose the location, make sure to have all permits and papers signed from state, local or federal agencies. ➢ Water that has sediment in it must not be drained directly. Use high quality dewatering bags to filter out water and remove sediment. A complete engineering analysis is required to conclude on how a particular dewatering process might affect the area and the regions surrounding it. Always hire professionals with the best quality equipment to help you with your constructional dewatering procedures. Visit http://www.swandewatering.com/ to learn more about complete dewatering systems.

More Related