Things to Remember While Installing Solar Films
Solar films serve as a great help in keeping homes or offices protected from the excessive heat. Sun Control Films not only help in reducing the brightness of the Sun indoors but also virtually eliminate the penetration of ultraviolet light. Apart from giving protection from the scorching outside heat they also help in reducing the energy consumption by air conditioners as the premises remains cooler. Solar films Installation in the homes and offices is a prudent choice and that’s why these films are used excessively. However, some important things need to be remembered if you are attempting to cover your windows with solar films. Handle with Care This is a very important instruction and needs to be followed carefully. The Sun Control Films are very delicate and they can get creased easily. In case, they get creased while handling, they will remain so forever and although you may still be able to use them the crease will remain visible and would leave a sloppy impression. Choose the Solution Wisely Sticky or concentrated solutions may look more appealing and workable but it is never a very good option to use them as these solutions don’t work very well with the solar films installation. Avoid using concentrated or degreasing detergents for making the solutions. These may not stick properly or upon drying may leave a cloudy impression on the windows.
Work in Team for Larger Windows If you are planning to cover a window which is around 3-4’ wider or larger then always have someone by your side for help. Window Films Installation involves many steps like removing the liner, installation, trimming, etc. and in all these processes the film needs to be handled properly and alone that might become a very tall order. So, if you are thinking of working up a large window always having someone to assist you will be a good idea. Work in Moderate Temperatures Although solar films are used for providing protection against sunlight yet, starting to cover up your windows when the Sun is shining bright outside will not be a good idea. The direct heat may lead to sticking of the film very quickly without giving you the time to adjust it properly or take out the air bubbles. If the weather is freezing outside then the film may not stick at all and hence your attempts will fail. The best time to cover your windows with the solar films is either early morning or late evening when the temperature is moderate. Be careful of dust If the dust particles are trapped inside the film they will spoil the whole process and hence you must ensure that the area is dust free while you are covering the windows. Turn off the fans in the vicinity to minimize any chance of dust getting in the way of the whole process. Do Not Lay down the Windows The best position to tint your windows is to keep them in the upright position. If for the sake of convenience you lay them down then the air bubbles will get trapped inside and your solar films will look badly done. So the best way to do this is to apply the films when the windows are hung vertically. Films are not Reusable Apart from making slight adjustments in the initial sticking phase, you must remember that the solar films are not reusable and hence whenever you are thinking of removing them always remember this fact. They can be removed easily without any leaving scar on the window but they cannot be reused again. You should also take proper precautions if you are working on a window which is at a higher elevation or requires extra effort. Always keep the required things handy as the whole process needs to be completed fast and with efficiency.