1 / 10

Mini-RF Requirements Overview

Mini-RF Requirements Overview. Mary Reden NASA/GSFC SGT, Inc. August 16-17, 2005. Mini-RF Overview.

sunnit
Download Presentation

Mini-RF Requirements Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Mini-RF Requirements Overview Mary Reden NASA/GSFC SGT, Inc. August 16-17, 2005

  2. Mini-RF Overview • Mini-RF is a NAWC/WD-provided synthetic aperture radar technology demonstration provided to the LRO spacecraft for the purpose of demonstrating new radar technology for future use in planetary resource mapping. • Mini-RF is composed of the following major elements: • Fixed planar antenna with dimensions 125 x 75 x 5.5 cm • Electronics box with dimensions 14.2 x 20.3 x 12 cm • Cable harnessing between the electronics box and the antenna, and to spacecraft electrical interfaces. • Mini-RF is the second in a spiral technology development effort, preceded by the Forerunner radar to be placed into Lunar orbit aboard the Chandrayaan-1 satellite. • Mini-RF will make a series of measurements to demonstrate enhanced technology capabilities over the Forerunner instrument.

  3. Mini-RF Block Diagram

  4. LRO Requirements Document Flow

  5. Mini-RF Level 1 Requirements • Mini-RF Level 2 requirements are defined, and are traceable to a single Level 1 requirement: • LRO Program Requirements Document, #ESMD-RLEP-0010 • RLEP-LRO-P160 Technology Demonstration - The LRO shall accommodate the NAWC provided Mini-RF device in order to provide the opportunity for demonstration of this technology in the lunar orbital environment provided it does not increase the project cost, delay the launch date, adversely impact the achievement of full mission success, or increase the overall risk posture of the primary mission.

  6. Mini-RF Level 2 Requirements • Key mission requirements: • LRO Mission Requirements Document (MRD), #431-RQMT-000004 • LRO Mission Concept of Operations Document, #431-OPS-000042 • Mini-RF Requirements and Goals Document, #431-RQMT-000157 • Key performance assurance requirements: • Generic Instrument Performance Assurance User's Guide, #430-HDBK-000007 • Tailored for Mini-RF to specifically address those areas that may adversely impact the achievement of full mission success, increase the overall risk posture of the primary mission, or have safety implications • Key verification requirements: • LRO Electrical Systems Specification, #431-SPEC-000008 • LRO Mechanical Systems Specification, #431-SPEC-000012 • LRO Thermal System Specification, #431-SPEC-000091 • LRO SpaceWire Specification, #431-SPEC-000103 • LRO Technical Resource Allocation Specification, #431-SPEC-000112

  7. Mini-RF Requirements Implementation • Implementation of the Mini-RF requirements: • Mini-RF Spacecraft Mechanical ICD, #431-ICD-000158 • Mini-RF to Spacecraft Thermal ICD, #431-ICD-000159 • Mini-RF to Spacecraft Electrical ICD, #431-ICD-000152 • Mini-RF to Spacecraft Data ICD, #431-ICD-000160

  8. Driving Requirements on the Spacecraft • Mechanical • The spacecraft shall maintain a Mini-RF mass allocation of 12 kg, including margin • The spacecraft shall mount the Mini-RF antenna such that the antenna normal is ~45-degree off-nadir, on the anti-sun side of the spacecraft • Thermal • The spacecraft shall provide survival heater switch service to maintain the Mini-RF devices within the following temperature limits: • -34 to +71 C for electronics • -160 to +100 C for antenna

  9. Driving Requirements on the Spacecraft • Electrical • The spacecraft shall provide 2 and 5 amp 28 v power services • The spacecraft shall provide a SpaceWire interface directly to the Solid State Recorder • The spacecraft shall accommodate a data transfer rate of 8 Mbps (nominal) up to 32 Mbps (maximum) during data collections • Operational • The spacecraft shall provide Mini-RF with a minimum of 12, 4-minute data collection opportunities over the LRO nominal 1-year mission • Mini-RF desires 2 successive orbits in each of 6 modes (S/X-bands, dual/quad polarization, mapping/zoom resolution) • Additional data collects at the lunar poles, bi-static radar operations and off-nadir pointing will be documented in the Concept of Operations Document as desirable targets of opportunity

  10. Mini-RF Constraints • The Mini-RF antenna and electronics box shall be thermally isolated from the spacecraft • Accommodation of Mini-RF on LRO shall not interfere with achievement of full mission success, or increase the overall risk posture of the primary mission • Mini-RF shall not interfere with LRO S/C S-band and Ka-band operations • Mini-RF waveform and electronics shall be designed to eliminate any interference with spacecraft S-band operations • Impact of interference shall be minimized by limiting, if necessary, the duration of Mini-RF collection intervals • Mini-RF operations shall be deconflicted with LROC scenes and with the S/C communications timeline • Data collection orbits will be infrequent and will be chosen to accommodate LRO mission constraints.

More Related