1 / 17

PDWG Validation of the 2028 ADS PCM V1.0

PDWG Validation of the 2028 ADS PCM V1.0. Jamie Austin Production Cost Modeling Data Work Group (PDWG) – Chair August 21, 2018. L&R Progress Report Continued Validation of the 2028 ADS PCM V1.0 Fixes within CAISO Footprint Fixes by NTTG DS approval of PDWG proposed edits

ssteel
Download Presentation

PDWG Validation of the 2028 ADS PCM V1.0

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PDWGValidation of the 2028 ADS PCM V1.0 Jamie Austin Production Cost Modeling Data Work Group (PDWG) – Chair August 21, 2018

  2. L&R Progress Report • Continued Validation of the 2028 ADS PCM V1.0 • Fixes within CAISO Footprint • Fixes by NTTG • DS approval of PDWG proposed edits • Review of Proposed Agenda for next in-person meeting, scheduled for August 28-29 Overview

  3. L&R Progress Report Tyler Butikofer

  4. Loads and Resource Balance by Energy

  5. Thermal Generation Balance

  6. Thermal Generation Balance – cont. Western Electricity Coordinating Council

  7. Renewable and Other Generation Balance

  8. Renewable and Other Generation Balance Western Electricity Coordinating Council

  9. Fixes within CAISO Footprint Yi Zhang, California ISO

  10. Two Peaker units that were originally parked should be modeled as units in service • Grapeland Peaker at 29305 • CTRPKGEN_29308 at 29308 • Remove the previously modeled BC_25187_1C and BS_25188_1E units CISC area

  11. Remove three pumped storage units at Hyatt • EdwardCHyatt2, EdwardCHyatt4, and EdwardCHyatt6 • Change Thermalito_2, Thermalito_3, Thermalito_4 from Pumped Storage to Hydro, with Load Following flag checked Hyatt and Thermalitohydro units

  12. Klamath Falls area • Remove Capt. Jack – Klamath Falls 500 kV, and keep Capt. Jack-Snow Goose – Klamath Falls 500 kV • Remove Malin – Klamath Falls 230 kV, and keep Malin – Snow Goose – Klamath Falls 230 kV • Meridian – Sam’s Valley – Dixonville 500 kV line impedances are wrong • Buckley – Slatt series capacitor is missing NW topology (per BPA’s comments)

  13. Use Kevin proposed changes for Antelope Nuke, but set the Min Up/Down time to 168 hours and NOT MUST RUN Use Kevin proposed changes for Antelope Nuke, but set the Min Up/Down time to 168 hours (previously they were 1 hour)

  14. Continued Validation of the 2028 ADS PCM V1.0 Jamie Austin

  15. Fixes by NTTG

  16. Summary of PDWG Approved Edits

More Related