AUTOMOTIVE NEW PRODUCTS 2013

1. AUTOMOTIVE NEW PRODUCTS 2013 “STEP IV” INTERNALLY: EXTERNALLY: AUTO NEWS #2 • PRESSES BRAND NEW • HYDRAULICS • CREEPERS AND STOOLS • OIL TRANSMISSION FILLER • AIR TOOLS • INJECTOR PULLER SET • TIE ROD TOOL • ERGO HEAVY DUTY SIDE CUTTING PLIERS • ROLL CARTS, TROLLEY ACCESSORIES • DIGITAL TORQUE ADAPTORS • PLASTIC REPAIR SET RE-LAUNCH 1

2. Auto News #2 Hydraulics Presses Creepers and stools Injector puller set Oil transmission fillerTie rod tool Air tools Plastic repair kit Digital torque adaptors Roll cartsTrolley accessories ERGO side cutters Step IV Step III Step II Step I 2

3. 3

4. AUTO RISING PAIR OF JACK STANDS • Product features: • The stand raises automatically when pulling the lever upwards. • No efforts to raise the stand thanks to a spring inside the pole. • Allows the user to have one free hand . • Exclusivity in Europe. • Three different capacities: 3, 5 and 10 ton. • BS & TÜV approved. • Sold in pairs. NEW Maxi height Mini height

5. JACK STANDS WITH SQUARE BASE • Product features: • Wider base surface in order to reduce the pressure on the ground and to allow supporting weights on sand or similar. • Strong safety pins with rubber grip. • The base has a place where you can put the pin vertically. The pin is attached to the base with a small cable to prevent it from getting lost when not in use. • Two different capacities: 7 and 15 ton. • BS & TÜV approved. NEW

6. FOLDABLE CRANE, 2 TON • Product features: • Foldable body and four fixed positions of the lifting arm: 2,000, 1,500, 1,000, 500 kg. • Dual pump cylinder which decreases the number of necessary strokes by 50% (compared to Irimo version). • Extreme flexibility and wide area of usage; • Minimum legs entry height: 130 mm • Maximum arm hook height: 2,640 mm • Steel and PU (polyurethane) covered wheels ensures both excellent durability and silent handling. • Swiveling PU covered lever for easy and comfortable pumping from all positions. • Increased safety thanks to: • ”Dead man” safety mechanism. • Overload valve. • Swivel safety hook. • CE certified. NEW Product code EAN Code Pcs Dimensions Weight(mm)(kg) BH6FC2000 7314150234639 11,950 x 580 x 570 168 Dimensions on next slide! 6

7. FOLDABLE CRANE, 2 TON NEW 7

8. FOLDABLE EUROPALLET CRANE, 600 KG • Product features: • Very compact and easy to store thanks to the foldable legs system. • Foldable body andthreefixed positions of the lifting arm: 200, 400 and 600 kg. • Dual pump cylinder which decreases the number of necessary strokes by 50%. • Extreme flexibility and wide area of usage: • Minimum legs entry height: 100 mm. • Maximum arm hook height: 2,135 mm. • Steel and PU (polyurethane) covered wheels ensure both excellent durability and silent handling. • Swiveling PU covered lever for easy and comfortable pumping from all positions. • Increased safety thanks to: • ”Dead man” safety mechanism. • Overload valve. • Swivel safety hook. • CE certified. NEW Product code EAN Code Pcs DimensionsWeightmm kg BH6PC600 7314150234622 11650x490x510 103 Dimensions on next slide! 8

9. FOLDABLE EUROPALLET CRANE, 600 KG NEW 9

10. MULTI PURPOSE JACK, 1.0 TON • Product features: • Multi purpose jack to be used with cars , ATV/ Quads and motorcycles. • It has two functions: works both as a trolley jack (lift up) and as a jack stand (keeps the vehicle lifted). • Extra large round shaped foot pedal for increased access from any position. • Dual pistons which decreases the number of necessary strokes with 50% (compared to single piston unit). • Rubber saddle included protecting all surfaces and prevents slipping. • Steel and PU (polyurethane) covered wheels ensures both excellent durability and silent handling. • Curved handle for increased comfort and accessibility. • Useful tray located at the bottom of the lever for easy storage of for example tools, screws and nuts. • Safety pressure valve preventing overloading. • Safety lowering valve ensures safe lowering even at maximum load. • Clicking / ratcheting system blocks the arm and acts as a jack stand with four positions. • CE certified and in accordance with BS EN1494 compliance. NEW 10 10 10

11. ENTRY LEVEL FLOOR JACK, 3 TON • Product features: • Double plunge for quick lifting (7 strokes). • Protected handle to avoid damaging the car. • Rubber saddle included. • PU wheels. • CE and EN1494 certified. NEW

12. 12

13. LOW PROFILE CREEPER • Product features: • Adjustable header with three positions. • Capacity: 136 kg. • Low height: 120 mm. • High density foam pad for higher resistance with good comfort. • Hanger at the back for easy storage in the garage. • Four PVC wheels, with 75 mm diameter, 25 mm width and steerable 360º. NEW 13

14. CREEPER AND STOOL COMBI • Product features: • Three working positions: creeper, seat and stool. • Capacity: 136 kg. • Low height: 135 mm. • High density foam pad for higher resistance with good comfort. • Six PP (polypropylene) wheels, with 60 mm diameter, 10 mm width and steerable 360º. NEW Position 2: seat Position 2: stool Position 1: creeper 14

15. STOOL WITH STORAGE • Product features: • Flexible height with easy-to-use adjustment system. • Capacity:136 kg. • Three drawer storage plus a tray for storage of tools, fasteners, accessories or any type of object. • Rotatable high density foam pad for higher resistance with good comfort. • Four PVC wheels, with 75 mm diameter, 25 mm width and steerable 360º. NEW 15

16. 16

17. BENCHPRESS, 15 TON • Product features: • Robust welded frame with exclusive design thanks to the rounded shapes. • Large pressure gauge for easy reading at convenient eyes level. • Sliding and chromed piston. • Rulers to facilitate centring the piston with the item to extract or insert. • Two V-blocks included usable on V or flat side depending on the need. • Auto-centering pins for the table. • Double speed pump with built-in safety overload valve. • Quick approach. • Pressing pins set with six pins and a punch plate included. • All handles and knobs are isolated. • Tool tray at the bottom. • Robust and stable feet. NEW Dimensions on next slide! 17

18. BENCHPRESS, 15 TON Dimensions: NEW 18

19. PRESSES 20, 30 AND 50 TON • Product features: • Robust welded frame with exclusive design with rounded shapes. • Large pressure gauge for easy reading at convenient eyes level. • Sliding and chromed piston. • Rulers to facilitate centring the piston with the item to extract. • Two V-blocks included usable on V or flat side depending on the need. • Auto-centering pins for the table. • Double speed pump with built-in safety overload valve. • Easy raising and lowering of the press table thanks to the winch with swiveling handle. • Quick approach thanks to the pedal or the handle. • Pedal with anti-slip rubber pad. • Pressing pins set with eight pins and a punch plate included. • All handles are isolated. • Tool tray at the bottom. • Robust and stable feet. NEW Dimensions on next slide! 19

20. PRESSES 20, 30 AND 50 TON Dimensions: NEW 20

21. SAFETY GUARD FOR 20, 30 AND 50 TON PRESSES NEW • Product features: • Safety guard to protect the user against projections of components during pressing. • Easy to install with just four screws. • The guard can be easily adjusted vertically according to the position of the table by just sliding the guard in the lateral guides, see picture. 21

22. 22

23. HOT STAPLER / PLASTIC REPAIRING SET • Product Features: • Application: allows the user to repair broken plastic through electric heating. • Application areas: • Car body repair shops • All kinds of maintenance departments • Electricians • Contents: • Electric heating device including pen and cable with EU plug. • U-shaped Staplers Ø 0.6 mm (100 units in a plastic box). • U -shaped Staplers Ø 0.8 mm x [(00 units in a plastic box). • V –shaped Staplers Ø 0.6 mm x (100 units in a plastic box). • Small electric device, enabling a very quick and strong repair. • Place the stapler in the pen, heat it up and you can easily put together broken pieces of plastic. • Heat control with three different positions, choose the level that suits the strength of the plastic to be worked on. • Several stapler shapes and sizes available, in total six different types offered individually (see next page). • Lateral TPR cover for protection of the device and a professional design. • Supplied in a foam inlay in blow mould case with user manual. • Check out our application video on YouTube: http://youtu.be/Zk-FF8u_GtM 23

24. ACCESSORIES FOR HOT STAPLER / PLASTIC REPAIRING SET • Boxes of staples,100 pcs. 24

25. 25

26. INJECTORS PULLER SET • Product features: • The kit includes: • Puller with 4 kg sliding hammer. • 10 various sockets and adaptors for removing Siemens, Bosch, Delphi and Denso injectors. • 1 ball joint to facilitate the pulling in different positions. NEW 26 26 26

27. 27

28. OIL TRANSMISSION FILLER • Product features: • Oil transmission filler, by using pressure. • Tank in polypropylene with 8 liters capacity. • Comprehensive set of 11 hose adaptors covering the majority of the car brands. NEW 28 28 28

29. 29

30. TIE ROD REMOVAL/INSTALLATION TOOL • Product features: • This tool makes it possible to install and remove steering knuckles from Ø 28 up to Ø 35 mm. • Completing our range of tie rods (our current BS50 covers Ø 35 up to Ø 45 mm). • The tool includes a head, a tube and a hexagon drive. • The head is composed of a body, a cage and 3 runners. • The rotation of the tool enables the self-locking of the runners between the body and the knuckle to screw or to unscrew. • New user manual available on the Intranet for BS50 and BS51. • Two repair sets available: BS5001 for BS50 and BS5101 for BS51.

31. 31

32. ICON INDEX Strikes per minute 32

33. 3/8" IMPACT WRENCH WITH PINNED ANVIL • Product features: • Magnesium housing. • Twin hammer mechanism with eight vanes rotor . • Rubber grip. • One-hand operation power regulator. • Fast forward/reverse valve. • Air exhaust in handle. • Rubber boot included. • Muffler kit included to choose the preferred power and sound combination. • The difference vs. BPM916 is that BPM916P is equipped with a pinned anvil for keeping the socket safely attached. NEW 33

34. 1/2" MINI IMPACT WRENCH WITH PINNED ANVIL 1/2" MINI IMPACT WRENCH WITH LONG ANVIL • Product features: • Magnesium housing. • Twin hammer mechanism with eight vanes rotor. • Rubber grip. • One-hand operation power regulator. • Fast forward/reverse valve. • Air exhaust in handle. • Rubber boot included. • Muffler kit included to choose the preferred power and sound combination. • The difference vs. BPM914 is that BPM914P is equipped with a pinned anvil for keeping the socket safely attached and BPM914L has a long anvil for better accessibility. NEW 34

35. 1/2" IMPACT WRENCH WITH PINNED ANVIL 1/2" IMPACT WRENCH WITH LONG ANVIL • Product features: • Magnesium housing. • Twin hammer mechanism with eight vanes rotor. • Rubber grip. • One-hand operation power regulator. • Fast forward/reverse valve. • Air exhaust in handle. • Rubber boot included. • Muffler kit included to choose the preferred power and sound combination. • The difference vs. BPM915 is that BPM915P is equipped with a pinned anvil for keeping the socket safely attached and BPM915L has a long anvil for better accessibility. NEW 35

36. STRAIGHT DIE GRINDER, 6 MM • Product features: • Die grinder 6 mm. • Includes 3 mm collet. • Rubber grip. • Safety trigger. • Balanced lightweight housing. • All ball bearing construction and high strength alloy steel gear system. • Hard coated motor plates. NEW 36

37. ANGLE DIE GRINDER, 6 MM • Product features: • Angle die grinder 6 mm. • 3 mm collet included. • Rubber grip. • Safety trigger. • Balanced lightweight housing. • All ball bearing construction and high strength alloy steel gear system. • Hard coated motor plates. NEW 37

38. DRILL WITH AUTOMATIC CHUCK, 10 MM • Product features and benefits: • Drill 10 mm with keyless chuck enabling the user to change drills fast and smoothly. • The difference vs. BP925 is that BP925KL is that BP925 has a key chuck. • Rubber grip. • Variable speed trigger. • Fast forward/reverse lever. • 0.0635 mm chuck runout. NEW 38

39. DRILL WITH AUTOMATIC CHUCK, 13 MM • Product features and benefits: • Drill 13 mm with keyless chuck enabling the user to change drills fast and smoothly. • The difference vs. BP926 is that BP926KL is that BP926 has a key chuck. • Rubber grip. • Variable speed trigger. • Fast forward/reverse lever. • 0.0635 mm chuck runout. • Support handle included. NEW 39

40. 40

41. ICON INDEX Strikes per minute 41

42. 7" ANGLE POLISHER • Product features: • 7" angle polisher. • Rubber grip. • Power regulator. • Safety trigger. • Spindle lock. NEW 42

43. 7" VERTICAL POLISHER • Product features: • 7" vertical polisher. • Rubber grips. • Power regulator. • Air exhaust in support handle. NEW 43

44. METAL SHEARS • Product features: • Air shears. • Cutting capacity: 1.6 mm Aluminum/1.2 mm steel. • Rubber grip. • Power regulator. • Safety trigger. NEW 44

45. EXTENDED CUT OFF TOOL • Product features: • Extended cut off tool 4"/102 mm. • Rubber grip. • Power regulator. • Safety trigger. • Spindle lock. NEW 45

46. LOW REVOLUTIONS GRINDER • Product features: • Low revolution grinder/tyre buffer with keyed chuck. • Rubber grip. • Power regulator. • Safety trigger. • Swivel connection. NEW 46

47. BLOW GUN NON OSHA • Product features: • Short version: • Air blowgun. • Brass inlet. • Long version: • Air blow gun with long nozzle, nozzle length 330 mm • Brass inlet. NEW 47

48. 48

49. ELECTRONIC TORQUE AND ANGLE ADAPTOR • Product features: • Enables easy and precise torque and angle tightening – all in one device! • Simple operation with a regular ratchet and socket. • Easy to follow the tightening in real time thanks to the 12 LED indicators and an audible signal. • Precise! Accuracy of ± 4% enables exact and accurate tightening. • Memory for up to 50 operations. • Possible to perform tightening in Nm, Lb.ft and Lb.in. • Angle tightening from 0-999º. • Possible to pre-set 9 different values for standardized tightening. • Small size enables torque tightening in confined and restricted areas. • Delivered in a protective pouch with foam inlay for maximum tool protection. 49

50. DIGITAL ANGLE METER • Product features: • Enables precise and easy angle tightening with digital precision! • Strong magnet on the back – can be clicked onto any ratchet, wrench, adjustable etc. • Easy to follow the tightening in real time thanks to the 6 LED indicators and an audible signal. • Precise! Accuracy of ± 2% enables exact and accuratetightening. • Memory for up to 50 operations. • Angle tightening from 0-999º. • Possible to pre-set 9 different values for standardizedtightening. • Small size makes it ideal for confined spaces. • Automatic shut-off for longer battery life. • Delivered in a protective pouch with foam inlay for maximum tool protection. 50