1 / 20

ECET 110 Technology levels--snaptutorial.co

For more classes visit<br>www.snaptutorial.com<br><br>1. (TCO 4) For the series-parallel circuit given in Figure 3.1 below, determine the total resistance RT between the terminals labeled A and B<br>2. (TCO 4) For the circuit given in Figure 3.3, obtain the following quantities.<br>a) Currents I1 and I2<br>b) Power dissipated by the resistor R3<br>

Download Presentation

ECET 110 Technology levels--snaptutorial.co

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECET 110 Technology levels--snaptutorial.com

  2. ECET 110 Technology levels--snaptutorial.com ECET 110 Quiz 2 For more classes visit www.snaptutorial.com 1. (TCO 4) For the series-parallel circuit given in Figure 3.1 below, determine the total resistance RT between the terminals labeled A and B 2. (TCO 4) For the circuit given in Figure 3.3, obtain the following quantities.

  3. ECET 110 Technology levels--snaptutorial.com ECET 110 Quiz 3 For more classes visit www.snaptutorial.com 1. (TCO 7) For the circuit given below, determine the total capacitance CT between the terminals labeled A and B.

  4. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 1 Homework For more classes visit www.snaptutorial.com Why do you never apply an ohmmeter to a live network? What is the voltage across a 220 Ω resistor if the current through it is 5.6 mA?

  5. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 1 iLab Analysis of a Series Circuit using Simulation and Actual Construction For more classes visit www.snaptutorial.com Objectives: To construct a circuit in series to test and verify Ohm’s Law and Kirchhoff’s Voltage Law using a multi-meter, breadboard, resistors and jumper wires. To simulate this construct digitally and mathematically to compare results to determine if the above laws are supported.

  6. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 2 Homework For more classes visit www.snaptutorial.com CHAPTER 6 4. For each circuit board in Fig. 6.74, find the total resistance between connection tabs 1 and 2. 10. For the network of Fig. 6.80:

  7. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 2 iLab Analysis of a DC Parallel Circuit using Simulation and Actual Construction For more classes visit www.snaptutorial.com Objectives: The objectives this week were to effectively learn to simulate and construct a parallel circuit and learn to troubleshoot issues that may be had by OPEN or Shorted circuits. Also to learn how to calculate current and resistance within parallel circuits

  8. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 2 Quiz For more classes visit www.snaptutorial.com 1. (TCO 3) Find the total conductance and total resistance of the parallel circuit given below. 2. (TCO 3) A resistor in one of the parallel branches is replaced by a short circuit as shown in the figure below. Determine the current IS through this shorted branch.

  9. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 3 Homework For more classes visit www.snaptutorial.com Chapter 7: Problems 1 (a, b, c), 2 (a, b), 3, 8, 10 1. Which elements (individual elements, not combinations of elements) of the networks in Fig. 7.60 are in series? Which are in parallel? As a check on your assumptions, be sure that the elements in series have the

  10. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 3 iLab Analysis of a DC Series-Parallel Circuit For more classes visit www.snaptutorial.com Objectives: To construct a series-parallel circuit correctly and measure its equivalent resistance.

  11. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 4 Homework For more classes visit www.snaptutorial.com Objectives: 1. To troubleshoot a complex circuit and determine various currents and voltages using format mesh analysis. 2. To simulate the complex circuit in MultiSim and record the required quantities.

  12. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 4 iLab Format Mesh Analysis For more classes visit www.snaptutorial.com Objectives: 1. To troubleshoot a complex circuit and determine various currents and voltages using format mesh analysis. 2. To simulate the complex circuit in MultiSim and record the required quantities. 3. Determine the various currents and voltages after wiring the circuit. Results: The results were as predicted.

  13. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 5 Homework For more classes visit www.snaptutorial.com CHAPTER 9 1a. Using the superposition theorem, determine the current through the 12 Ohm resistor of fig. 9.119. we will use superposition to analyze this circuit. First short E2 and find the current thru the 12 Ohms resistor and then Short E1 and keep E2 in the circuit and find the same current. Then algebraically add the two currents (add if in the same directions and subtract if opposite direction

  14. ECET 110 Technology levels--snaptutorial.com • ECET 110 Week 5 iLab Thevenin’s and Superposition Theorem • For more classes visit • www.snaptutorial.com • Objectives: 1. To troubleshoot a complex circuit and determine various currents and voltages using superposition theorem and compare the results with the results of last week’s lab.

  15. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 6 Homework Capacitors For more classes visit www.snaptutorial.com Chapter 10: Capacitors 20. Repeat Problem 19 for R = 1 MΩ, and compare the results 26. For the network in Fig. 10.98, composed of standard values: 34. For the automobile circuit of Fig. 10.105, VL must be 8 V before the system is activated. If the switch is closed at t = 0 s, how long will it take for the system to be activated?

  16. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 6 iLab Transient Analysis of a Resistor-Inductor Circuit For more classes visit www.snaptutorial.com 1. OBJECTIVES Perform a transient analysis on a Resistor-Capacitor circuit, and measure capacitor charge

  17. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 6 Quiz For more classes visit www.snaptutorial.com 1. (TCO 7) For the circuit given below, determine the total capacitance CT between the terminals labeled A and B

  18. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 7 Homework For more classes visit www.snaptutorial.com Chapter 11: Inductors Homework problems [12, 14, 29, 36]

  19. ECET 110 Technology levels--snaptutorial.com ECET 110 Week 7 iLab Transient Analysis of a Resistor-Inductor Circuit For more classes visit www.snaptutorial.com Objectives: Calculate time constant, transient time, current and voltage across inductor at beginning and the end of the charge cycle. Use MultiSim to test the calculations. Build and test a physical circuit using the MultiSim schematic.

  20. ECET 110 Technology levels--snaptutorial.com

More Related