1 / 12

Theoretical Basis for Statistical Process Control (SPC)

Theoretical Basis for Statistical Process Control (SPC). Dr. Joan Burtner Certified Quality Engineer Associate Professor of Industrial Engineering and Industrial Management. Overview. Introduction to SPC Objectives Theory of Process Variation Rational Subgroups Types of Control Charts

sharront
Download Presentation

Theoretical Basis for Statistical Process Control (SPC)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Theoretical Basis for Statistical Process Control (SPC) Dr. Joan Burtner Certified Quality Engineer Associate Professor of Industrial Engineering and Industrial Management

  2. Overview Introduction to SPC Objectives Theory of Process Variation Rational Subgroups Types of Control Charts Construction of Control Charts Control Charts for Attributes Control Charts for Variables Interpretation of Control Charts Manual Application of Tests Statistical Software Application of Tests 2 ISE 468 ETM 568 JMB

  3. Characterizing Causes of Variation The intent of process monitoring is to distinguish between random and non-random variation. 3 ISE 468 ETM 568 JMB

  4. Theory of Process Variation: Statistical Control The common variations in process variability that are caused by natural incidences are in general not repetitive, but various factors due to chance and are called random variation. All processes are subject to random variation. If the cause of variation is systematic (not natural) the process variation is called non-random variation. When non-random variation is present, the quality engineer should identify and eliminate the source of the variation. When a process is subject to non-random variation the process is described as out-of-control. If only random variation is present, the process is described as in-control. 4 ISE 468 ETM 568 JMB

  5. Control Limits, Random and Nonrandom Sample Observations Upper Control Limit (UCL) Non-random Non-random +3σ Process Mean 99.7% Lower Control Limit (LCL) -3σ 1 2 3 4 5 6 7 8 9 10 11 12 Sample number Source: Ozcan Figure 12.4 (Modified for Three Sigma Limits) 5 ISE 468 ETM 568 JMB

  6. Statistical Control Chart Types Attributes Variables(Subgroups) c-chart p-chart u-chart Mean Charts (X-bar Charts) Variation Charts σ Method Range Method 6 ISE 468 ETM 568 JMB

  7. Variables Control Charts (Continuous Data) When process characteristics can be measured, variables control charts are the appropriate way to display the process monitoring. The Xbar-chart and the Range chart are displayed and interpreted together. When the Range chart exhibits out-of-control status, the rules for evaluating the Xbar-chart should not be used. The Xbar chart is appropriately evaluated after the Range chart indicates that the process is in-control. Use caution when statistical software evaluates both charts simultaneously. 7 ISE 468 ETM 568 JMB

  8. Variables Control Charts Variables(Subgroups) Variables (Individuals) Individual observation Moving Range Mean Charts (X-bar Charts) Variation Charts Note that the tests that apply to the subgroup charts do not apply to the Individuals Charts. σ Method Range Method 8 ISE 468 ETM 568 JMB

  9. Attribute Control Charts (Discrete Data) When process characteristics can be counted, attribute-based control charts are the appropriate way to display the process monitoring. The p-chart is the appropriate control chart for a process with only two outcomes (defective or not defective) when the proportion defective is calculated. The c-chart is the appropriate tool to display monitoring if the number of occurrences per sampling period is recorded. The u-chart is the appropriate control chart if the number of occurrences and the number of items per sampling period is recorded. The average number of occurrences per sample is calculated. 9 ISE 468 ETM 568 JMB

  10. Rules for Development of Charts (Devor) • Choose quality characteristic to be measured or counted • Collect at least 25 samples • Develop trial control limits • Evaluate for special causes • Determine special causes and remediate • Eliminate out-of-control points • Recalculate control limits • Continue until chart shows process is in control • Monitor process using established control limits 10 ISE 468 ETM 568 JMB

  11. Interpretation of Control Charts • Look for special cause variation. • Points that are outside 3 sigma limits • Series of points that are unusually close to 3 sigma limits • Non-random patterns such as linear trends, oscillation, runs above or below centerline, to many successive points near the centerline • Textbook tests for special causes differ slightly from Minitab tests but Minitab allows you to adapt the tests. 11 ISE 468 ETM 568 JMB

  12. References Devor, R., Chang, T. & Sutherland, J. (2007). Statistical Quality Design and Control, 2nd ed, Upper Saddle River, NJ: Prentice-Hall. ISBN 0-13-041344-5 Ozcan, Y. (2009). Quantitative Methods in Health Care Management 2nd ed, San Francisco, CA: Jossey-Bass. ISBN-13 978-0-470-43462-8 12 ISE 468 ETM 568 JMB

More Related