florida product approval system n.
Skip this Video
Loading SlideShow in 5 Seconds..
Florida Product Approval System PowerPoint Presentation
Download Presentation
Florida Product Approval System

Loading in 2 Seconds...

play fullscreen
1 / 29

Florida Product Approval System

1 Views Download Presentation
Download Presentation

Florida Product Approval System

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Florida Product Approval System Florida Building Commission Florida Department of Community Affairs 2555 Shumard Oak Blvd | Tallahassee, FL 32399-2100 | (850) 487-1824 www.floridabuilding.org

  2. Florida’s Product Approval System Local Product Approval or “Optional” State Product Approval Recent Product Approval Changes

  3. State Product Approval Thisrule appliesto approval of products and systems which comprise thebuilding envelope and structural frame, for compliance with the structural requirements of the Florida Building Code RULE 9B-72 F.A.C.

  4. RULE 9B-72 Scope (a) Panel Walls; (b) Exterior Doors; (c) Roofing Products; (d) Skylights; (e) Windows; (f) Shutters; and (g) Structural Components. (1) Products in the following categories as defined by subcategories of subsection 9B-72.010(31), F.A.C., shall be available for approval by the Commission pursuant to Rule 9B-72.090, F.A.C., for use in the state: • (2) This rule applies to approval of products and systems, which comprise the building envelope and structural frame, for compliance with the structural requirements of the Florida Building Code

  5. The Website www.floridabuilding.org for submittal of applications, payment of fees for entity approvals and state product approvals, the Building Code Information System (BCIS).

  6. www.floridabuilding.orgHOMEPAGE

  7. State Product Approval Accreditation bodiesaccredit andmonitorthe competency and performance of an agency carrying out specific tasks.

  8. State Product Approval Evaluation entitiesconduct product evaluations based on tests reports, and/or rational analysis.

  9. State Product Approval Testing labs conduct product tests. Quality assurance agencies monitor product production.

  10. State Product Approval Certification agencies evaluate products based on tests and/or rational analysis; conduct quality assurance; certify compliance with standards; and list and label products.

  11. State Product Approval Validation entities certify compliance with standards and certify to the Florida Building Commission that product approval applications are correct.

  12. State Product Approval VERY IMPORTANT!! All products in the eight categories must be manufactured with a quality assurance program in place, monitored by a Commission approved quality assurance entity.

  13. State Product Approval METHOD 1 - Products with Code Performance Criteria and Standardized Test, or Comparative or Rational Analysis using one of the following four options: Option A: a certification mark or listing Option B: a test report Option C: an evaluation report from an evaluation entity Option D: an evaluation report from a Florida Architect or Engineer

  14. State Product Approval METHOD 2 - Products Which Have No Standardized Test, or Comparative or Rational Analysis using one of the following two options: Option A: an evaluation report from an evaluation entity Option B: an evaluation report from a Florida Architect or Engineer

  15. State Product Approval Applications for state product approval are $500 per product sub-category. One $500 application would cover a manufacturer’s entire line under one of these subcategories.

  16. Product Approval Methods Four Methods for State Approval Certification Method Test Report Evaluation Report from an Evaluation Entity Evaluation Report from a Florida licensed Architect or a Florida Professional Engineer Recent Product Approval Changes

  17. 9B-72.080 Product Validation Two Types of Validation Administrative Validation Technical Validation Validations NOTE: The validation process has been added to Certification Mark or Listing method on the Florida State Product Approval System

  18. Administrative Validation Applicable to: A certification mark or listing from an approved certification agency An evaluation report from a Florida Registered Architect or Licensed Engineer independent from the manufacturer An evaluation report from an approved evaluation entity (i.e. ICC)

  19. Criteria consists of: Verification of certification, certification agency status, product description, testing standards per Florida Building Code and compliance documentation with the current code. Verification of installation instructions, anchorage requirements and product performance under certification. Verification of any limits of use included as certified and use of rational analysis within the scope of certification Administrative Validation Criteria

  20. Administrative ValidationChecklist

  21. Administrative ValidationChecklist

  22. Administrative ValidationOverview

  23. Technical Validation Applicable to: A test report from an approved testing laboratory An evaluation repot from an approved evaluation entity that is not an independent third party from the manufacturer

  24. In addition to criteria for Administrative Validation, Technical validation includes: Determination that the evaluator has complied with acceptable standards of engineering principles. Engineering verification that the evaluation complies with the Code. Copy of the application complying with all aspects of rule 61G15-36 F.A.C. must be filed with the Commission. Technical Validation Criteria

  25. Technical ValidationChecklist

  26. Technical ValidationChecklist

  27. Technical ValidationOverview


  29. Mo Madani Department of Community Affairs Codes and Standards mo.madani@dca.state.fl.us 850.921.2247 (p) | 850.414.8436 (f)