1 / 42

New Mexico FFA

New Mexico FFA. Agricultural Mechanics Career Development Event Welding and Metal Working. Abrasive Cut-Off Saw. Abrasive saw blade material is used to cut metal. Acetylene Regulator.

selma
Download Presentation

New Mexico FFA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. New Mexico FFA Agricultural Mechanics Career Development Event Welding and Metal Working

  2. Abrasive Cut-Off Saw • Abrasive saw blade material is used to cut metal.

  3. Acetylene Regulator • Used to reduce the high acetylene cylinder pressure to a workable constant prssure. Hose and cylinder connections are left handed threads.

  4. Brazing Rod • Used as a filler rod when braze welding. May or may not be flux coated.

  5. Copper Coated Mild Steel Welding Rod • Used as a filler rod for mild steel oxy-fuel welding. The copper coating prevents rusting

  6. Cutting Torch Tip • Used with a cutting torch handle when oxy-fuel cutting. The tip size is determined by the thickness of the metal.

  7. Cutting Torch • Used with the cutting tip when oxy fuel cutting steel.

  8. Electrode • A coated metal wire used for shielded metal-arc welding a variety of metals.

  9. Electrode Holder • Used to mechanically hold the electrode while conducting current from the electrode lead.

  10. Flashback Arrestor • Used to limit damage from a flashback by allowing the gases to flow in only one direction, preventing the flame from burning back into the equipment.

  11. Friction Lighter • Used to light torch’s for cutting and welding. Safer than using matches or a lighter.

  12. Ground Clamp • Used to connect the ground lead (cable) to the work. This provides a completed electrical circuit.

  13. Inert Gas Regulator • Regulates shielding gases such as argon, helium and carbon dioxide. Used for MIG and TIG welding.

  14. Leather Gloves • Used to protect the hands from the ultraviolet rays and spatter of hot metal.

  15. MIG Tips • MIG tips guide the welding wire through the gun nozzle.

  16. MIG Welding Gun • Used to deliver the wire and shielding gas to the weld surface.

  17. MIG Wire • Used as filler wire for the MIG welding process. May be bare wire or flux cored.

  18. MIG Nozzle Gel • Coating applied to lubricate the welding wire and tip for smoother wire flow during the welding process and cut down on splatter.

  19. Oxygen Regulator • Used to reduce the high oxygen cylinder pressure to a workable constant pressure. Hose and cylinder connections are right-handed threads.

  20. Pipe Cutting Guide • A variety of different types of guides that clamp around pipe to aid in cutting angles etc. Pipe cutting guides are available in a variety of sizes.

  21. Porcelain Gas Cup • Non-metallic cup that directs the flow of shielding gases when TIG welding.

  22. Protective Leather, sleeves, apron or coat • Used to protect the body from harmful ultraviolet rays and hot molten spatter while welding.

  23. Slag or Chipping Hammer • Used for slag removal from shielded electrode weld.

  24. Tip Cleaner • Used to clean and partially recondition both welding and cutting tips.

  25. Torch Handle • Used to mix fuel gasses and oxygen in the correct proportions.

  26. Tungsten Electrode • Non-consumable electrode that generates the arc when TIG welding. Can be purchased in a variety of sizes.

  27. Vise Grip Welding Clamp • With its flat and “U” shaped jaws, it is used to clamp metals quickly.

  28. Welding/Cutting Goggles • Used to protect eyes from damaging light rays and heat rays that may prove destructive to eye tissue. Should not be used for arc welding.

  29. Welding Helmet • Used to protect the eyes and face from the harmful arc rays and molten spatter produced when arc welding.

  30. Welding Tip • Used for all types of oxy-fuel brazing and welding.

  31. Wire Brush • Used to prepare metal for welding or cutting. Removes slag or rust . May be used to clean parts of machinery.

More Related