1 / 35

Lecture 13 - The Smith Chart Introduction to the Smith Chart

Lecture 13 - The Smith Chart Introduction to the Smith Chart Principle of Operation Construction of the Smith Chart Key Points on the Smith Chart Using Smith Chart with Load and Line Combinations. THE SMITH CHART.

season
Download Presentation

Lecture 13 - The Smith Chart Introduction to the Smith Chart

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 13 - The Smith Chart Introduction to the Smith Chart Principle of Operation Construction of the Smith Chart Key Points on the Smith Chart Using Smith Chart with Load and Line Combinations

  2. THE SMITH CHART • Devised in 1944 by Philip H. Smith, Bell Labs, U.S.A. • A graphical aid for transmission line calculations. • Used nowadays for designing “matching” circuits and displaying RF data. Philip Smith: 1905-1987

  3. l ZL Load Transmission line, Zo Generator The Smith Chart basically enables you to convert between  and Z graphically, either at the load or at an arbitrary point down the line.

  4. Simplified Smith Chart 1 In this simplified version of the Smith Chart most of the grid of lines has been removed. For clarity, in these lectures this version will be used to illustrate the properties of the Smith Chart. 0.5 2 3 0.2 5 10 0 0.2 0.5 1 2 3 5 10 0 -10 -5 -0.2 -3 -2 -0.5 -1

  5. Simplified Smith Chart 1 In this simplified version of the Smith Chart most of the grid of lines has been removed. For clarity, in these lectures this version will be used to illustrate the properties of the Smith Chart. 0.5 2 3 0.2 5 10 0 0.2 0.5 1 2 3 5 10 0 -10 -5 -0.2 -3 -2 -0.5 -1

  6. SMITH CHART BASICS • ρis a complex quantity: ρ= |ρ|e jφ • For all ZL, 0 <|ρ| <1 Circle of UNIT RADIUS in complex number plane Imaginary +jX R+jX φ |ρ| (1,0) 0 R Real -jX Complex Impedance Plane Complex Reflection Coefficient Plane

  7. ρZL To avoid having to use a different Smith Chart for every value of Zo, the normalised impedance, z , is used: z = ZL/ Zo The normalised impedance z can then be “denormalised” to obtain the load impedance ZL by multiplying by Zo: ZL = z.Zo In terms of its real and imaginary components, the normalised impedance can be written as: z = r + jx

  8. CONSTRUCTION OF THE SMITH CHART (pages 3-5) is for information only IT IS NOT EXAMINABLE

  9. MAPPING BETWEEN IMPEDANCE PLANE AND THE SMITH CHART r is the normalised resistance axis x is the normalised reactance axis Lines of constant normalised resistance Lines of constant normalised reactance r = 0 1 0.5 2 0.4 0.2 0 -0.2 -0.4 x = X/Zo 3 0.2 5 x = 0 10 x r = R/Zo 0 0.2 0.5 1 2 3 5 10 r 0.2 0.4 0.6 0.8 0 -10 -5 -0.2 -3 -2 -0.5 Complex (Normalised) Impedance Plane -1 Smith Chart

  10. 1 0.5 2 3 0.2 5 10 x 0 0.2 0.5 1 2 3 5 10 0 r -10 -5 -0.2 -3 -2 -0.5 -1 normalised reactance, x normalised resistance, r

  11. 0.70745º 0.707 45º 1/0º Step 1: Plot ρ Example (page 2): Measurements on a slotted line with Zo = 50Ω give: |ρ| = 0.707 and φ= 45º. Find ZL ρ Unit Circle in Reflection Coefficient Plane

  12. 1 0.5 2 3 0.70745º 0.2 5 0.707 10 x 0 0.2 0.5 1 2 3 5 10 0 45º r 1/0º -10 -5 -0.2 -3 -2 -0.5 -1 Step 2: Superimpose Smith Chart grid Example (page 2): Measurements on a slotted line with Zo = 50Ω give: |ρ| = 0.707 and φ= 45º. Find ZL Unit Circle in Reflection Coefficient Plane

  13. Step 3: Read off normalised values for r and x 1 0.5 2 3 0.707/45º 0.2 5 0.707 10 x 0 0.2 0.5 1 2 3 5 10 0 45º r 1/0º -10 -5 -0.2 -3 -2 -0.5 -1 Example (page 2): Measurements on a slotted line with Zo = 50Ω give: |ρ| = 0.707 and φ= 45º. Find ZL , x = 2 r = 1 Unit Circle in Reflection Coefficient Plane

  14. 1 0.5 2 3 0.70745º 0.2 5 0.707 10 x 0 0.2 0.5 1 2 3 5 10 0 45º r 10º -10 -5 -0.2 -3 -2 -0.5 -1 Step 4: Calculate R and X by “denormalizing”: ZL = Zo(r + jx) = 50(1+j2) = 50 + j100Ω Example (page 2): Measurements on a slotted line with Zo = 50Ω give: |ρ| = 0.707 and φ= 45º. Find ZL , x=2 r=1 Unit Circle in Reflection Coefficient Plane

  15. KEY POINTS ON THE SMITH CHART Open Circuit (ZL = ∞, z = ZL/Zo = ∞) z = r + jx = ∞ 1 0.5 2 ρ= 1/0º ρ= 1/0º 3 0.2 5 10 x 1/0º 0 0.2 0.5 1 2 3 5 10 r 0 -10 -5 -0.2 -3 -2 -0.5 -1 Reflection Coefficient Plane Smith Chart

  16. Short Circuit (ZL = 0, z = 0) 1 0.5 2 3 0.2 5 10 x 10 0 0.2 0.5 1 2 3 5 10 r 0 -10 -5 -0.2 -3 ρ= 1/180º -2 -0.5 ρ= 1/180º z = r + jx = 0 + j0 -1 Reflection Coefficient Plane Smith Chart

  17. Matched Load (ZL = Zo, z = 1) 1 0.5 2 3 0.2 5 10 x 1/0 0 0.2 0.5 1 2 3 5 10 r 0 -10 -5 -0.2 -3 ρ= 0 -2 -0.5 ρ= 0 z = r + jx = 1 + j0 -1 Reflection Coefficient Plane Smith Chart

  18. Resistive Load (ZL = R + j0 , z = r) R and Zo (for a lossless line) are REAL, therefore  is real. R > Zo,ρ +ve, φ= 0º R < Zo,ρ -ve, φ= 180º 1 0.5 2 3 0.2 5 10 x R < Zo R = Zo R > Zo 10 0 0.2 0.5 1 2 3 5 10 R = 0 r 0 -10 R =  -5 -0.2 -3 -2 -0.5 -1 Reflection Coefficient Plane Smith Chart

  19. Purely Reactive Load (ZL = 0 + jX , z = 0 + jx) 1 0.5 2 3 z = jx (inductive) 0.2 5 10 x 10 0 0.2 0.5 1 2 3 5 10 z = j0 r 0 -10 z = j -5 -0.2 -3 z = jx (capacitive) -2 -0.5 -1 Reflection Coefficient Plane Smith Chart

  20. Purely Reactive Load (ZL = 0 + jX , z = 0 + jx) 1 0.5 2 3 z = jx (inductive) 0.2 5 10 x 10 0 0.2 0.5 1 2 3 5 10 z = j0 r 0 -10 z = j -5 -0.2 -3 z = jx (capacitive) -2 -0.5 -1 Reflection Coefficient Plane Smith Chart

  21. General Case (ZL = R + jX) 1 0.5 2 3 0.2 5 |ρ| 10 φ x 1/0 0 0.2 0.5 1 2 3 5 10 r 0 -10 -5 -0.2 -3 -2 -0.5 -1 Reflection Coefficient Plane Smith Chart

  22. Pure Reactance 1 Pure Resistance 0.5 2 3 0.2 5 Matched Load 10 x 0 0.2 0.5 1 2 3 5 10 0 r -10 Short Circuit Open Circuit -5 -0.2 -3 -2 -0.5 -1

  23. RATIO OF V-/V+ AT AN ARBITRARY DISTANCE l FROM THE LOAD ZL Zo ZL x = -l x = 0 If the line is losslessgl = jbl , hence: r-l= re-2gl= re-j2bl= |r|ejf e-j2bl= |r|ej(f- 2bl) i.e. the magnitude of the reflection coefficient at x = -lis the same as at x = 0 but its phase changes fromfto f - 2bl . An additional phase change of -2blhas been added by the introduction of the length of line,l .

  24. l ZL Load Transmission line Generator 1 0.5 2 3 z = r+jx ρof ZL only 0.2 5 |ρ| φ 10 x 2βl 1/0 0 0.2 0.5 1 2 3 5 10 2βl r 0 -10 -5 ρof ZL plus line of length l -0.2 z of load and line of length l -3 -2 -0.5 Point rotates clockwise by 2βlradians (2x360xl/λ degrees) at a constant radius -1 Reflection Coefficient Plane Smith Chart

  25. In the case of a lossless line a = 0, so g = a + jb = jb and is purely imaginary, so the hyperbolic functions reduce to trigonometric functions: Zin becomes: or: Original expression:

  26. l ZL “Clockwise towards generator” Load Transmission line Generator 1 0.5 2 3 z = r+jx  of ZL only 0.2 5 |ρ| φ 10 x 2βl 1/0 0 0.2 0.5 1 2 3 5 10 2βl r 0 -10 -5  of ZL plus line of length l -0.2 z of load and line of length l -3 -2 -0.5 -1 Point rotates clockwise by 2βl radians (2x360 l/λ degrees) Reflection Coefficient Plane Smith Chart

  27. Tutorial C, Question 2 Solution by Smith Chart To find Zin: • zL = ZL/Zo • = (100+j50)/75 • = 1.33+j0.67 zL 3. 2l = 2x2l/λ = 2x2fl/v = 1.26 radians = 72º 4. Read z-l from chart: z-l = 1.75-j0.45 72º 2. Plot zL on Smith Chart z-l 5. Denormalise to find Zin: Zin = Zo x z-l = 75(1.75-j0.45) = 131-j34 Ω (cf. 126-j36 Ω by exact calculation) Zo = 75 Ω ZL = 100 + j50 Ω l = 2.2 m, f = 100 MHz v = 2 x 108 ms-1

  28. For extra copies of the Smith Chart go to the Web page for my part of the course and click on the Smith Chart link

  29. The Smith Chart & General Transmission Lines r-l = re-2gl = re-2αle-j2bl = |r|ejf e-2αl e-j2bl = |r|e-2αlej(f-2bl)  =  +j  - propagation constant  - attenuation constant  - phase constant 1 0.5 2 z = r+jx ρ 3 0.2 5 10 x 10 0 0.2 0.5 1 2 3 5 10 r 0 ρ-l -10 z of load and line of length l -5 -0.2 -3 -2 -0.5 -1 Reflection Coefficient Plane Smith Chart

  30. The Smith Chart and Variation of Frequency r-l = |r|ej(φ-2bl)for a lossless line rotation angle is -2l= -2.(2/λ).l = -2.(2.f/v).l = -4fl/v or constant x f 1 0.5 2 ρdc zdc 3 zf1 ρf1 0.2 5 10 x 1/0 0 0.2 0.5 1 2 3 5 10 ρf2 r 0 zf2 -10 -5 -0.2 ρf3 zf3 -3 -2 -0.5 frequency f3 > f2 > f1 -1 Reflection Coefficient Plane Smith Chart

  31. Summary The Smith Chart is used as a graphical aid for converting between a load impedance, Z, and a reflection coefficient,ρ. (This can be done with or without sections of line being present.) ρZL

  32. To avoid having to use a different Smith Chart for every value of Zo, the normalised impedance, z, is used: • z = ZL/Zo • (z = r + jx) • z can then be denormalised to obtain the load impedance ZL, by multiplying by Zo: • ZL = z.Zo

  33. The circles correspond to lines of constant normalised resistance, r. • The arcs correspond to lines of constant normalised reactance, x. r = 0 1 0.5 2 0.4 0.2 0 -0.2 -0.4 x = X/Zo 3 0.2 5 x = 0 10 x r = R/Zo 0 0.2 0.5 1 2 3 5 10 r 0.2 0.4 0.6 0.8 0 -10 -5 -0.2 -3 -2 -0.5 -1 Complex Impedance Plane Smith Chart

  34. Adding a length, l, of lossless line to a load, ZL, corresponds on the Smith Chart to rotating at constant radius from zLCLOCKWISE through an angle 2l. (“CLOCKWISE TOWARDS GENERATOR”) • If the line is not lossless, the radius decreases as we rotate around the centre. • Increasing the signal frequency causes z-l to rotate clockwise around Smith Chart at constant radius.

More Related