'Outer cylinder' presentation slideshows

CDC Summary

CDC Summary. Shoji Uno (KEK) July-8, 2009. Baseline Design. sBelle. Belle. Tentative drawing by Kohriki-san. Connection regions 1. Endplate and Outer cylinder. Main and Conical (Backward). Connection regions 2. Main and Conical. Backward. Forward. Connection regions 3.

670 views • 55 slides

EFDA Dipole Status

EFDA Dipole Status. Presented by Ettore Salpietro. Contents. Project overview Objectives, Schedule System specifications System description Design concept, guidelines, main features Performance analysis Conclusions. Project overview. Objective

513 views • 36 slides

CDC

463 views • 35 slides

CP502 Advanced Fluid Mechanics

820 views • 18 slides

CDC Structure

CDC Structure. S. Uno KEK 2009.3.18. Endplate Design. sBelle. 350mm. 300mm. 250mm. Wire stringing. Vertical stringing with outer cylinder. Human can stand inside the chamber and can touch the wire. Inner diameter without the small cell part : ~500mm

291 views • 18 slides

WBS 6.03 Global Mechanics: L2 Update

WBS 6.03 Global Mechanics: L2 Update. Eric Anderssen Marco Oriunno Level-2 Manager Level-2 Deputy

381 views • 15 slides

MICE Phase 1

372 views • 15 slides

WBS 6.3.2 Global Mechanics Outer Cylinder

WBS 6.3.2 Global Mechanics Outer Cylinder. Risk Scrubbing October 17 2019 Dennis Boettcher. Deliverable Overview. The Outer Cylinder is the main vessel that houses other ITk assemblies. The major interfaces to the OC are the IWV, the outer-most Strip Shell Layer-3, and Structural Bulkhead.

153 views • 15 slides

RF SPIN FLIPPER DESIGN

RF SPIN FLIPPER DESIGN. For nHe-3 experiment at SNS. Original Spin Flipper Design. 0.7 inch thick Aluminum Shell. 4 nylon outer quadrants wrapped in 18 AWG solid wire. Nylon Inner Cylinder wrapped in 18 AWG solid wire. Length~15.75 in. Outer diameter ~ 16 in. Cross-section.

421 views • 14 slides

Mechanical calculations of the CDC end-plates

July 8 th , '09 KEK H. Yamaoka. Mechanical calculations of the CDC end-plates. KEK H. Yamaoka. Introduction. ~2400. CDC. ~R1090. End-plate. Mechanical calculations of CDC end-plates was carried out. Load: Wire tension ? ~4000kg in total. Material: Outer cylinder ? CFRP

238 views • 13 slides

CDC structure

CDC structure. Shoji Uno (KEK) July-8, 2009. Baseline Design. sBelle. Belle. Tentative drawing by Kohriki-san. Connection regions 1. Endplate and Outer cylinder. Main and Conical (Backward). Connection regions 2. Main and Conical (Forward). Back ward. Forward.

242 views • 12 slides

Solar Refrigerators David Ragan

Solar Refrigerators David Ragan. The Need. Prevent food from spoiling Reduce food-borne diseases Store crops for sale at a later date Store vaccines. Varieties. There are two different types of solar refrigerators. Type 1

238 views • 9 slides

MAE 5130: VISCOUS FLOWS

MAE 5130: VISCOUS FLOWS. Homework #3 Solutions Mechanical and Aerospace Engineering Department Florida Institute of Technology D. R. Kirk. PROBLEM 3.2. Consider axial Couette flow of Fig. 3-3 with both cylinders moving

92 views • 7 slides