1 / 6

Chapter 24. Congestion Control and Quality of Service part 3

Chapter 24. Congestion Control and Quality of Service part 3. 23.9 QoS in Switched Networks. QoS in Switched Network. QoS in Frame Relay Four different attributes are used to control traffic

seanna
Download Presentation

Chapter 24. Congestion Control and Quality of Service part 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 24. Congestion Control and Quality of Servicepart 3 23.9 QoS in Switched Networks

  2. QoS in Switched Network • QoS in Frame Relay • Four different attributes are used to control traffic • Access rate, committed burst size (Bc), committed information rate (CIR), and excess burst size (Be) • For permanent virtual circuit (PVC) connections, the attributes are negotiated once; for switched virtual circuit (SVC) connections, they are negotiated for each connection during connection setup. • Frame Relay QoSAttributes : • Access Rate: For every connection, an access rate (in bits per second) is defined it depends on the bandwidth of the channel connecting the user to the network. The user can never exceed this rate. • Committed Burst Size: This is the maximum number of bits in a predefined time that the network is committed to transfer without discarding any frame or setting the Be bit. • Committed Information Rate: The committed information rate (CIR) is similar in concept to committed burst size except that it defines an average rate in bits per second. Committed Information Rate (CIR) = Bc/T bps • Excess Burst Size This is the maximum number of bits in excess of Be that a user can send during a predefined time. The network is committed to transfer these bits if there is no congestion.

  3. User Rate in Relation to Bc and Bc + Be • How can a user send bursty data ?

  4. QoS in ATM • QoS in ATM is based on the class, user related attributes, and network-related attributes • Classes: CBR, VBR, ABR, and UBR • CBR (constant): real-time audio or video over dedicated T-line • VBR (variable): compressed audio or video • VBR-RT is designed for real-time services (such as voice and video) and use compression techniques to create a variable bit rate. • VBR-NRT is designed for non real-time services but use compression techniques to create a variable bit rate. • ABR (available): delivers cells at a minimum rate. If more network capacity is available, this minimum rate can be exceeded, suitable for bursty application • UBR (unspecified): best-effort delivery that does not guarantee anything.

  5. QoS in ATM • User-related attributes: those attributes that define how fast the user wants to send data. These are negotiated at the time of contract between a user and a network: • SCR (sustained cell rate): average cell rate over a long time interval The actual cell rate may be lower or higher than this value, but the average should be equal to or less than the SCR. • PCR (peak cell rate) The user's cell rate can sometimes reach this peak as long as the SCR is maintained. • MCR (minimum cell rate) defines the minimum cell rate acceptable to the sender. • CVDT (cell variation delay tolerance) measure of the variation in cell transmission times. For example, if the CVDT is 5 ns, this means that the difference between the minimum and the maximum delays in delivering the cells should not exceed 5 ns.

  6. QoS in ATM • Network-related attributes: • CLR (cell loss ratio) defines the fraction of cells lost (or delivered so late that they are considered lost) during transmission. • CTD (cell transfer delay) The cell transfer delay (CTD) is the average time needed for a cell to travel from source to destination. The maximum CTD and the minimum CTD are also considered. • CDV (cell delay variation) the difference between the CTD maximum and the CTD minimum. • CER (cell error ratio) defines the fraction of the cells delivered in error

More Related