1 / 10

WP 8.6.2 Common DAQ Emlyn Corrin, Vincent Boudry 17 February 2011

WP 8.6.2 Common DAQ Emlyn Corrin, Vincent Boudry 17 February 2011. Common DAQ How to integrate different DAQs “Umbrella DAQ” – EUDAQ? Data format LCIO? Should keep raw data Running modes ILC-like (train triggerless ) / Pseudo-ILC ( train+trigger ) / Classic

sauda
Download Presentation

WP 8.6.2 Common DAQ Emlyn Corrin, Vincent Boudry 17 February 2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. WP 8.6.2 Common DAQEmlyn Corrin, Vincent Boudry17 February 2011

  2. Common DAQ • How to integrate different DAQs • “Umbrella DAQ” – EUDAQ? • Data format • LCIO? • Should keep raw data • Running modes • ILC-like (train triggerless) /Pseudo-ILC (train+trigger) / Classic • Common API to CERN and DESY beam data Some Issues

  3. Existing flexible and user-oriented DAQ • Adapt EUDAQ to new beam telescope • MimosaProducer for NI readout • Tagging mode for triggers • Improved online monitoring • Look into integration with other DAQs EUDAQ

  4. Early mini-TLU (<€1000) by May,then full TLU later Compatible with EUDET TLU & CALICE BIF(with CALICE-specific firmware) Use new connector (FMC), Xilinx SP601 host HDMI for DUT connectionswith dongle for LVDS/RJ45 or TTL/LEMO Gigabit Ethernet (IPBus) for sending timestamps etc. AIDA-TLU

  5. All hardware available Software: XDAQ Full web interface, prototype Qt interface Will go to testbeam in July 2011 CALICE DAQv2

  6. ODR based on PLDA XPressFX100 • ODR vs Ethernet card • Deliverables: • Extend TLU (with Bristol) • CALICE BIF card (with LLR, LAPP, Bristol) • Adapt CALICE ODR for Common DAQ RHUL

  7. Follow CALICE DAQ system • Zero level DAQ by July 2011: data collection and transmission to DIF board • DIF H/W and F/W prototype based onXilinx evaluation board, for July 2011 • LDA & ODR adapted from CALICE,work ongoing over summer 2011 • DAQ adapted from CALICE: 2012 and later • AIDA calorimeter prototype • Flexible tungsten absorber • Power pulsing • Include LumiCal alignment system DAQin global testbeam DAQ system FCAL

  8. Hardware based on ALICE TPC • Standalone DAQ with ALICE drivers/libraries(same as for EUDET/LTPC) • No common DAQ interface or TLU/DBOX trigger • Modifications needed: • New “Front End Card” • New backplanes • MCM instead of FEC • Timescale: H/W and S/W by September 2013 • Implement common server to interfacebetween local DAQ and common control S-ALTRO + LCTPC

  9. Set up regular meetings: • Remote every 2 months • Physical every 6 months • 1st deliverable for M20 (Oct 2012):Definition of technical characteristics for common DAQ infrastructure • Compatibility of EUDAQ and CALICE DAQ • Develop hardware part of DAQ • System interfaces to existing LC detector systems • Extend readout to high fluxes Tasks for 2011

More Related