1 / 10

Multifunctional PDMS tips fabricated by polymer casting of KOH etched pyramidal p its

Multifunctional PDMS tips fabricated by polymer casting of KOH etched pyramidal p its. First Presentation; Project Defence. Kees Schilder. Introduction. Polymer tip array Increase of throughput Challenge is inclination of tip array Advantage of PDMS Compliance Stiffness. Applications.

Download Presentation

Multifunctional PDMS tips fabricated by polymer casting of KOH etched pyramidal p its

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Multifunctional PDMS tips fabricated by polymer casting of KOH etched pyramidal pits First Presentation; Project Defence Kees Schilder

  2. Introduction • Polymer tip array • Increase of throughput • Challenge is inclination of tip array • Advantage of PDMS • Compliance • Stiffness

  3. Applications • Proteome analysis • Cleaning • Direct write lithography C. Wingrenet al., Progress in miniaturization of protein arrays – a step closer to high-density nanoarrays, Drug Discovery Today (2007) F. Huoet al., Polymer Pen Lithography, Science (2008)

  4. Fabrication Process - Pits

  5. Fabrication Process - Pits & Holes – 1.1 Fabrication Process - Pits & Holes – 1.2

  6. Fabrication Process - Pits & Holes – 2.1 Fabrication Process - Pits & Holes – 2.2 Fabrication Process - Pits & Holes – 2.3

  7. Mask Design • Simple design • Various configurations

  8. Timeline - Milestones What has to be done What has been done

  9. Expected Challenges • Producing of (very) small tips due to the viscosity of PDMS • PDMS to SiO2 bonding

  10. Questions & Discussion

More Related