1 / 16

Solidification / Melting Moving Boundary Problems: A finite difference method

Solidification / Melting Moving Boundary Problems: A finite difference method. Final Project MANE 6640 – Fall 2009 Wilson Braz. Background. Solidification has obvious application to engineering problems such as: Casting, metallurgy, soil mechanics, freezing of food, etc.

said
Download Presentation

Solidification / Melting Moving Boundary Problems: A finite difference method

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Solidification / MeltingMoving Boundary Problems:A finite difference method Final Project MANE 6640 – Fall 2009 Wilson Braz

  2. Background • Solidification has obvious application to engineering problems such as: • Casting, metallurgy, soil mechanics, freezing of food, etc. • Solidification may be modeled using a moving boundary. • Several techniques for solving the moving boundary problem. • Isotherm Migration Method (IMM), method of lines, finite element, finite difference, enthalpy method, and others.

  3. C C L L The problem: • Use 2-D Finite Difference method to analyze the solidification of square plate Symmetry B.C. Tinitial > Freezing Tw < Freezing 2 2 Tw < Freezing

  4. The Problem - Continued.Comparison of Results • Results from 2 different sources are in disagreement • Method was coded in MATLAB • Results were compared with those given in sources

  5. Approach - General • Enthalpy method • Use an explicit, finite difference routine to numerically solve • Develop numeric approximation equations, discretize domain, set initial conditions, set boundary conditions, march through domain, step through time. Find: Such that:

  6. Approach Technique • Material properties vary depending on state (liquid or solid) • Conditional statements test for material state using temperature. • Apply appropriate values for material properties depending on state. • Calculate ‘H(x,y)’ using finite differencing • Find ‘u(x,y)’ given using new ‘H(x,y)’

  7. Non-Real material properties, initial and boundary conditions: • To simplify calculation, and to compare directly with published results, the following material properties were used: • Mesh size varied • Time increment set to satisfy CFL condition

  8. Determining solid/liquid interface Solid Liquid Interface Temp < Freezing Temp Temp Y-coord @ x=0

  9. Results T(x,y,t)#grid pts. = 11x11, Dtime = 0.0001

  10. Results table: 11x11 mesh Values of the y-coordinate on the solid-liquid interface for fixed values of x at various times Values using method coded in MATLAB Values taken from John Crank NOTE: Values of x-coordinate shown in left table were found by liniearly interpolating location where T = 1.0000. Method used on right table is unknown Comparison

  11. Results – Non real solidPlot of Enthalpy: Red Solid – Blue Liquid#grid pts. = 11x11, Dtime = 0.0001

  12. Results Table showing solid-liquid interface #grid pts. = 41x41, dt = 0.00005

  13. ResultsPlot of Temperature: #grid pts. = 41x41, dt = 0.00005

  14. ResultsPlot of Enthalpy: Red Solid – Blue Liquid#grid pts. = 41x41, dt = 0.00005

  15. Results – Non real solidPlot of Enthalpy: Red Solid – Blue Liquid#grid pts. = 61x61, dt = 0.000025

  16. Difficulties & Limitations with this approach • Trouble matching results presented by John Crank, and Ernesto Gutierrez-Miravete • Suspect an issue with initial calculation of H(x,y,0), or u(x,y,0) • 1st time step shows temperature jump up to ~2

More Related