html5-img
1 / 10

Geothermal Heating / Geothermal Heat Pumps

Geothermal Heating / Geothermal Heat Pumps. Allie Paccadolmi. How T hey Work. “Split System” – outdoor unit (condenser) and indoor unit (evaporator coil) Compressor  changes gaseous refrigerant to high pressure gas Refrigerant cools and changes into a high temp gas

ryo
Download Presentation

Geothermal Heating / Geothermal Heat Pumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Geothermal Heating / Geothermal Heat Pumps Allie Paccadolmi

  2. How They Work • “Split System” – outdoor unit (condenser) and indoor unit (evaporator coil) • Compressor  changes gaseous refrigerant to high pressure gas • Refrigerant cools and changes into a high temp gas • Liquid refrigerant expands and turns into gas – gas then absorbs heat from circulating air

  3. Advantages • Twice as efficient as the top-rated air conditioners • Energy costs are 30-70% lower • Reduces greenhouse gas emissions equivalent to planting 750 trees

  4. Disadvantages • Initial cost is high  two to three times higher than a conventional heating/cooling system • Open-loop systems – bring in water from outside, can lead to clogging, mineral deposits, or corrosion of pipes

  5. Impact on the Environment? • Reduces greenhouse gas emissions • 5.9 million CO2 emissions cut • 1.6 million C emissions cut

  6. Compared to other Energy Sources • Lasts longer – abt50 years longer • No gas lines – no potential for leakage or fire

  7. Restrictions • Open-loop systems: need a large supply of clean water to be most efficient • Limits use in coastal, lake, and river areas

  8. Facts • Takes only 1 kW/hr for a geothermal heat pump to produce nearly 12,000 Btu of cooling or heating. (To produce the same number of Btus, a standard heat pump consumes 2.2 kilowatt-hours.) • 50% more efficient than the best gas furnaces • 70% of energy used in a geothermal heat pump system is renewable energy from the ground

  9. Websites • http://climatelab.org/Geothermal_Heat_Pumps • http://www.residential.carrier.com/products/geothermalheatpumps/index.shtml • http://www.consumerenergycenter.org/home/heating_cooling/geothermal.html • http://www.thisoldhouse.com/toh/article/0,,20162296,00.html

More Related