1 / 35

NCEP PTYPE Algorithms

NCEP PTYPE Algorithms. Fred H. Glass NOAA/NWS St. Louis. LSX Winter Weather Workshop – November 19, 2008 . Why Have Ptype Algorithms?. Forecasting winter weather is a significant challenge A variety of precipitation algorithms have been developed in an effort to address this challenge!.

rosine
Download Presentation

NCEP PTYPE Algorithms

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NCEP PTYPE Algorithms Fred H. Glass NOAA/NWS St. Louis LSX Winter Weather Workshop – November 19, 2008

  2. Why Have Ptype Algorithms? • Forecasting winter weather is a significant challenge • A variety of precipitation algorithms have been developed in an effort to address this challenge!

  3. Algorithms 101 • Ptype from the algorithms is derived by post-processing of the model output • Ptypes are generated when even just a trace of precipitation is generated by the model • No single algorithm handles all ptypes in a sufficient manner • Always examine soundings; even when they are accurate the output from the various algorithms may generate conflicting ptypes due to their methodologies and assumptions • An ensemble approach should be considered by comparing the output of the different algorithms

  4. Algorithms/Techniques • NCEP Baldwin-Schichtel • NCEP Revised • Ramer • Bourgouin • Czys

  5. NCEP Baldwin-Schichtel(aka NCEP, Baldwin, or BTC) • Developed based on MS research at Univ. of Oklahoma by Schichtel, utilizing ETA model vertical thermodynamic profiles and hourly precipitation reports • Utilizes a decision tree approach • Identifies warm and cold layers by calculating the area between the 0°C or -4°C isotherm and the wet-bulb temperature • Compares magnitude of warm/cold layers (area) with the surface temperature to identify ptype

  6. NCEP Baldwin-Schichtel(the steps) • First identifies the highest saturated layer (considered to be the precipitation generation layer) • Next determines the initial state of these hydrometers • T < -4°C → assumed to be ice crystals • T ≥ -4°C → assumed to be supercooled water drops • If supercooled water droplets, then checks the surface temperature (lowest model layer) • Tsfc ≤ 0°C → freezing rain • Tsfc > 0°C → rain

  7. NCEP Baldwin-Schichtel(the steps) • If ice crystals, then the magnitude of the area between the -4°C isotherm and the wet-bulb temperature profile in the sounding is computed • if area ≤ 3000 deg m → snow • if area > 3000 deg m → ice crystals melted → checks to see if hydrometers re-freeze into ice pellets or if they fall to the surface as rain or freezing rain

  8. NCEP Baldwin-Schichtel(reviewing the process)

  9. NCEP Baldwin-Schichtel(Strengths and Weaknesses) Strengths • Easily applied and widely used • Initial check for hydrometer state • Utilizes the wet-bulb temperature • Forecasting freezing rain and sleet Weaknesses • Will forecast freezing or liquid precipitation with deep isothermal layer near the surface with Tw between 0°C and -4°C • Ignores impact of dry layers • Tendency to over-forecast freezing rain and sleet

  10. NCEP Baldwin-Schichtel(problem sounding)

  11. NCEP Revised • A modified version of the NCEP Baldwin-Schichtel • Attempts to balance the freezing rain and sleet bias of the regular version by having a bias towards snow • Instead of the -4°C area check, it computes the area in the sounding with a wet-bulb temperature greater than 0°C

  12. NCEP Revised(modified step) • If ice crystals, then the magnitude of the area in the sounding with a wet-bulb temperature > 0°C is computed • if area ≤ 500 deg m → snow • if area > 500 deg m → ice crystals melted → checks to see if hydrometers re-freeze into ice pellets or if they fall to the surface as rain or freezing rain

  13. NCEP Revised(Strengths and Weaknesses) Strengths • Easily applied • Initial check for hydrometer state • Utilizes the wet-bulb temperature • Eliminates the near surface isothermal layer problem with the original algorithm • Removes the freezing rain and sleet bias Weaknesses • Not readily available • NCEP website • Part of dominant technique • Ignores impact of dry layers

  14. Ramer • Developed in the early 1990s utilizing over 2000 cases of collocated surface precipitation observations and upper air soundings • Utilizes T, RH, and the Tw at different pressure levels as input • Based on the pressure level data, it identifies layers where precipitation is likely and calculates an ‘ice fraction’ • Follows the idealized precipitation parcel down to the ground from a ‘precipitation generating level’, anticipating the state of the hydrometer

  15. Ramer(the steps) • Two preliminary checks are completed before the method performs a full calculation • if surface Tw > 2°C → rain is diagnosed • if surface Tw ≤ 2°C and the Tw < -6.6°C at all other levels → snow is diagnosed • If these checks fail then a full calculation of the ‘ice fraction’ of the hydrometer is computed

  16. Ramer(the steps) • Determine the ‘precipitation generating level’ • highest level with RH > 90% • level must be located at or below 400 mb • Determine the initial hydrometer state at the generating level • if Tw < -6.6°C → completely frozen (ice fraction=1) • if Tw ≥ -6.6°C → completely liquid (ice fraction=0) • The algorithm then determines the amount of freezing and melting and the resultant ‘ice fraction’ of the hydrometer is computed

  17. Ramer(the steps) • The algorithm then determines the amount of freezing and melting and the resultant ‘ice fraction’ as the hydrometer descends from the ‘generation level’ • Identifying layers warmer/colder that 0°C based on the depth of the layer and average Tw • Assigning an ice fraction at each level • Ptype is determined by the final ice fraction of the hydrometer at the surface • > 85% = sleet, <4% and TWsfc < 0 = freezing rain • Between 4-85% = mixed, 100% = snow

  18. Ramer(Strengths and Weaknesses) Strengths • Developed utilizing observed data • Initial check for hydrometer state • Utilizes the wet-bulb temperature • Verifies well - high POD for snow (90%) and freezing rain (60%) Weaknesses • Hard to visualize • Does not account for impact of dry layers • Low POD for sleet (low FAR also)

  19. Bourgouin • Developed in the early 1990s in Canada utilizing a dataset from two winters of collocated surface precipitation observations and upper air soundings • Based on the premise that the temperature variation of a hydrometer and its phase changes are predominately driven by the temperature of the environment through which it falls; assumes a constant vertical motion and terminal velocity • Calculates the areas above and below freezing, and the magnitude of the freezing and melting energy then determine ptype.

  20. Bourgouin(Strengths and Weaknesses) Strengths • Based on observed data and associated ptype • Can be applied to any region or model data • High POD for freezing rain Weaknesses • Assumes ice crystals are present • Does not account for dry layers or impacts • Uses T rather than Tw • Assumes a constant terminal velocity of hydrometers

  21. Czys • A non-dimensional parameter developed to distinguish ice pellet and freezing rain environments • Not derived from any observed data, but rather on the established condition that most incidents of freezing rain and ice pellets are associated with an elevated warm layer above a layer of sub-freezing air adjacent to the surface, and any cloud ice must completely melt for freezing rain

  22. Czys • Initially tested with excellent results using data from the 1990 Valentine’s Day Ice Storm in the Midwest, and several other events during the winter of 1995-96. • Ptype is determined primarily by computing the ratio of the residence time that an ice sphere remains in a warm layer, to the time required for complete melting • Minor modifications by Cortinas et. al (2000) to also predict snow and rain

  23. Czys(Strengths and Weaknesses) Strengths • Can be applied to any region or model data • Limited skill in forecasting sleet and delineating rain Weaknesses • Not based on observed data • Poor with snow • Overall is the worst performing algorithm • Limited availability

  24. Dominant Ptype Ensemble • Approach utilized by the WRF-NAM output available in both AWIPS and Bufkit and the GFS in AWIPS • WRF-NAM uses 5 schemes – NCEP BS, NCEP Revised, Ramer, Bourgouin, and explicit cloud microspyhysics • GFS uses 4 schemes - NCEP BS, NCEP Revised, Ramer, and Bourgouin • Ties result in the most dangerous ptype (ZR, S, IP, R) • SREF – like WRF-NAM → dominant ptype of 5 schemes for each member (21 members) → ptype with most members wins • Dominant algorithm approach (SREF NCEP BS, Cysz)

  25. Availability • NCEP Baldwin-Schichtel • EMC website/NAM meteogram (www.emc.ncep.noaa.gov/mmb/precip_type) • Part of dominant ptype in SREF (SPC or NCEP Winter System) (www.emc.ncep.noaa.gov/mmb/SREF/FCST/COM_US/winter_js/html/prob_prcptype.html) or (www.spc.noaa.gov/exper/sref/) • Part of dominant ptype ‘ensemble’ for GFS in AWIPS and WRF-NAM in AWIPS/Bufkit • HPC Winter Weather Diagnostics (WWD) website • NCEP Revised • EMC website/NAM meteogram • Part of dominant ptype ‘ensemble’ for GFS in AWIPS and WRF-NAM in AWIPS/Bufkit • Ramer • EMC website/NAM meteogram • Part of dominant ptype ‘ensemble’ for GFS in AWIPS and WRF-NAM in AWIPS/Bufkit • LAPS in AWIPS • GFS Bufr data in Bufkit

  26. Availability • Bourgouin • EMC website/NAM meteogram • Part of dominant ptype ‘ensemble’ for GFS in AWIPS and WRF-NAM in AWIPS/Bufkit • Any model in Bufkit • Cysz • SPC SREF dominant ptype

  27. AWIPS(Dominant of NCEP BS, NCEP Revised, Ramer, & Bourgouin)

  28. Winter Weather Diagnostics (WWD)(Baldwin-Schichtel – NCEP)

  29. SPC SREF(NCEP Dominant)

  30. SPC SREF(Czys Dominant)

  31. NCEP SREF Winter System(NCEP Dominant)

  32. NAM PTYPE Meteograms

  33. Bufkit

  34. Summary of strengths & weaknesses • NCEP Baldwin-Schichtel • Good for ZR and IP; utilizes Tw • Problem with near surface isothermal layers • NCEP Revised • Better for snow – eliminates isothermal layer problem • Does not account for dry layers • Ramer • Strongest from statistical approach; utilizes Tw • Does not account for dry layers; difficult to understand • Bourgouin • Easy to visualize; observed data used in creation • Does not check initial hydrometer state • Cysz • Limited skill with IP and ZR • Overall the worst performing

  35. That’s It! Questions?

More Related