1 / 4

High-Side FET Regulator with Low-Side FET and Resistors

This circuit features a regulator with both high-side (HO) and low-side (LO) FETs, with resistors on the gates to ensure proper operation under specific conditions. The highlighted area shows the 4-layer board design, where ground and power planes are not visible.

robert
Download Presentation

High-Side FET Regulator with Low-Side FET and Resistors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Low side (LO) FET Same regulator but without resistors fitted to the gates of the FETS High side (HO) FET

  2. Low side (LO) FET 10 Ohm resisters fitted to the gates of both high and low side FET’s Under the same conditions, regulator delivering 350mA High side (HO) FET

  3. Area highlighted is the regulator, Note this is a 4 layer board, ground and power planes are not visible

More Related