1 / 19

Ch 13. Wired LANs: Ethernet

Ch 13. Wired LANs: Ethernet. 13.1 IEEE Standards. Project 802 launched in 1985 To set standards to enable intercommunication among equipment from a variety of manufacturers. Data Link Layers. Framing Logical Link Control (LLC) Medium Access Control (MAC) CSMA/CD for Ethernet LAN

remy
Download Presentation

Ch 13. Wired LANs: Ethernet

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ch 13. Wired LANs: Ethernet

  2. 13.1 IEEE Standards • Project 802 launched in 1985 • To set standards to enable intercommunication among equipment from a variety of manufacturers

  3. Data Link Layers • Framing • Logical Link Control (LLC) • Medium Access Control (MAC) • CSMA/CD for Ethernet LAN • Token passing for Token Ring and Token Bus LAN  flow and error control

  4. 13.2 Standard Ethernet • Ethernet • Originally developed at Xerox’s Palo Alto Research Center (1976) • Generations • Standard Ethernet: up to 10 Mbps • Fast Ethernet: up to 100 Mbps • Gigabit Ethernet: up to 1 Gbps • Ten Gigabit Ethernet: up to 10 Gbps

  5. Frame Format • 802.3 MAC frame format

  6. Frame Length • Minimum length is required for collision detection • Maximum length is for small buffer size and preventing monopoly of shared medium

  7. Physical Address • Addressing • 6-byte physical address, in hexadecimal notation • Usually dedicated to network interface card (NIC) • Support unicast, multicast, and broadcast • Refer to the textbook

  8. Multiple Access • Access method • 1-persistent CSMA/CD • Slot-time = round-trip time + time to send the jamming • Defined in bits: 512 bits (= 51.2 us over 10-Mbps Ethernet) • To detect collision on time, a station should be able to detect a collision before it sends out the minimum-size frame (512 bits) • Maximum network length • = propagation speed x slot time / 2 • = (2x108m/s) x (51.2 us) / 2 = 5120m • Time for sending the jamming signal and others (e.g., repeater) reduces it to 2500m

  9. Coding • Now, we move from MAC to PHY • Manchester encoding and decoding • Help synchronization owing to the transition in the middle • Requires doubled signal rate of the original

  10. Cables for Ethernet • Implementations

  11. 13.3 Changes in the Standard • Bridged Ethernet • Connect two or more Ethernet networks by “bridge” • Bridge acts as a station in each separate network, and prevents signals from propagating across networks • Effects of bridge • Raising the bandwidth • Separating collision domains domain domain

  12. Layer 2 switch or switching hub • Switched Ethernet • Multi-port bridge allows the bandwidth is shared only between the station and the switch

  13. Full-Duplex Ethernet • Increase the capacity of each domain from 10 Mbps up to 20 Mbps

  14. 13.4 Fast Ethernet • IEEE 802.3u • Upgrade the data rate to 100 Mbps • Make it compatible with Standard Ethernet • Keep the same 48-bit address • Keep the same frame format • Keep the same min. and max. frame lengths • MAC • CSMA/CD • Autonegotiation

  15. PHY • Point-to-point or start topologies only (no bus topo.) • Implementation

  16. 13.5 Gigabit Ethernet • IEEE 802.3z • Upgrade the data rate to 1 Gbps • Make it compatible with Standard or Fast Ethernet • Use the same 48-bit address • Use the same frame format • Keep the same min. and max. frame lengths • Support autoconfiguration as defined in Fast Ethernet

  17. Modes of Gigabit Ethernet • Full-duplex mode with switch – mostly used • Half-duplex mode with hub • Traditional: 512-bit min. frame  slot time = 0.512us  max. network length = 25m • Carrier extension: 512-byte min. frame slot time = 4.098us  max. network length = 200m • Frame bursting: combine multiple short frames as a single frame

  18. Topologies • Point-to-point, star, two stars, and hierarchy of stars • Implementation

  19. Homework • Exercise in Chapter 13 • 16 • 17 • 18 • 19

More Related