The Sandhurst Competition 2012 Radio Familiarization ASIP (1523E) SFC Salazar No Reference
Place antenna here. Place hand mic here (either slot will work).
In order to load a frequency, turn the selector switch to “LD” for load. NOTE: You will here a buzzing noise. This is the radio’s way of asking for COMSEC. Once you have changed the settings on the radio to “SC/PT” it will stop. By doing this, you have told it that it will not get any COMSEC.
In order to scroll through the menu, hit “MENU/CLR” button to show the options. Once you have found the option you want, you can change the settings by hitting the “CHG” button until you find the option you need.
Loading a SC/PT Frequency Use the MENU/CLR and CHG buttons to:
Set CHAN to “1”. Set COMSEC setting to “PT” Set MODE to “SC”.
Press the FREQ button to display , then hit the MENU/CLR button, within 7 seconds, to show [_____] on the screen. Now the radio is prepared for you to enter the frequency. Now enter your frequency numbers by using the number pads (ex: 36.567). You must begin within 7 seconds or the display will go back to .
After entering the frequency, hit the STO button, within 7 seconds, to store the frequency into the radio. Switch the selector switch to SQ/ON to begin transmission. NOTE: In order to send transmission, you must press the button on the hand mic to transmit, then let go once you have finished speaking to receive the distant end’s responses.