1 / 6

Javier Urchueguía, on behalf of the GEOCOND team

Project GEOCOND: Advanced materials and processes to improve performance and cost-efficiency of Shallow Geothermal systems and UTES. Javier Urchueguía, on behalf of the GEOCOND team. Project Geocond.

raymonds
Download Presentation

Javier Urchueguía, on behalf of the GEOCOND team

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Project GEOCOND: Advanced materials and processes to improve performance and cost-efficiency of Shallow Geothermal systems and UTES Javier Urchueguía, on behalf of the GEOCOND team

  2. Project Geocond In the Common Implementation Roadmap of the RHC-Platform of 2014, some key performance indicators for shallow geothermal installations are stated: SG1: A Seasonal Performance Factor in the order of 5 for 2020. SG2: A Hellström-efficiency (a measure of the impact of boreholethermal resistance) of about 80% in 2020. SG3: A further decrease in energy input and reduced costs for operating the geothermal heat pump system. GEOCOND is contributing to all these goals. Project Co-ordinator:UPV-VLC GA: 727583 www.geocond.eu

  3. Project Geocond • Project GEOCOND aims at improving substantially the operational efficiency of BHE systems by optimising the materials for individual components (pipes, grout) and the overall setup: • Plastic pipes and fitting elements with high thermalconductivity, target: 2x higher thermal conductivity compared to currently comercial HDPE pipes • New high-conductivity borehole filling (grouting) materials, including low temperature PCM, target:12% lower borehole thermal resistance and higherheat storage capacity • Tailor-made solutions for grouting materials and innovative pipesconfiguration, target: 20% re-ductionin borehole length Project Co-ordinator:UPV-VLC GA: 727583 www.geocond.eu

  4. Project workplan • At this stage, the target materials and additives cannot yet be disclosed; however, the main pathways are: • Development of pipe materials is towards geothermal pipes with customized thermal conductivities and improved performance. This does not only include higher thermal conductivity, but addresses also low-conductive materials for inner pipes in coaxial BHE, lower resistivity to flow at the inside and better bounding to the grout on the outside. • New additives for grouts to increase thermal conductivity and provide tailor-made performance while improving handling and bounding characteristics; inclusion of phase change materials (PCM) in additives to enhance thermal storage capacity, in particular for UTES applications Project Co-ordinator:UPV-VLC GA: 727583 www.geocond.eu

  5. Project workplan • Injection of grout also in pores, fissures and fractures to improve the thermal characteristics of the surrounding ground (Thermal Soil Enhancement, TSE) • A Material Selection Support System, based on multi-objective simulation and optimisation within a simulation software, is under development to allow rational selection of best material specifications for a range of applications. Project Co-ordinator:UPV-VLC GA: 727583 www.geocond.eu

  6. Conclusions Project GEOCOND aims at improving substantially the operational efficiency of BHE systems by optimising the materials for individual components (pipes, grout) and the overall setup. This improvement in technical efficiency shall be translated into cost savings in installation and operation, allowing for a leap in economic benefits of shallow geothermal technology. Furthermore, a significant reduction of the drilled meters and the amount of pipes used to fulfil the same heating and cooling needs enables a decrease of environmental impact. Project Co-ordinator:UPV-VLC GA: 727583 www.geocond.eu

More Related