1 / 7

STM Tips

STM Tips. Piezo actuators. Atomically Sharp Tips:. Z. X. Y. DC Bias. 28 th March 2005. Charlie Sykes. STM Tip Etching. 1A/10V. W Anode. Pt Cathode. KOH (3M). 28 th March 2005. Charlie Sykes. STM Tip Etching. Omicron Instruments. Homemade. 28 th March 2005. Charlie Sykes.

rasul
Download Presentation

STM Tips

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. STM Tips Piezo actuators Atomically Sharp Tips: Z X Y DCBias 28th March 2005 Charlie Sykes

  2. STM Tip Etching 1A/10V W Anode Pt Cathode KOH (3M) 28th March 2005 Charlie Sykes

  3. STM Tip Etching Omicron Instruments Homemade 28th March 2005 Charlie Sykes

  4. STM Tip Etching 10X 50X Optical Microscope: 28th March 2005 Charlie Sykes

  5. STM Tip Etching SEM Images (Lou Deguzman): Fast Etch (10sec) Slow Etch (180 sec) 28th March 2005 Charlie Sykes

  6. STM Tip Etching SEM High Magnification: Fast Etch (10sec) Slow Etch (180 sec) 28th March 2005 Charlie Sykes

  7. STM Tip Etching EQUIPMENT NEEDED: 0.25 mm Tungsten Wire for Cathode Platinum or Platinum/Iridium (80:20) for Anode 3 mol/dm3 KOH Solution Methanol (add 168g of KOH pellets to 1 liter of deionized water SLOWLY with stirring - DO NOT ADD WATER TO PELLETS, A LOT OF HEAT IS GIVEN OFF) PROCEDURE: Fill beaker with KOH solution Add electrodes Connect power supply Turn up current to ~0.8 A for slow etch, ~1.2 A for fast etch Once wire breaks turn off power Rinse new tip in deionized water and methanol a few times 28th March 2005 Charlie Sykes

More Related