1 / 18

MIRI Observing Templates

Science team George Rieke (U of A, Lead) Gillian Wright (ROE, Instrument PI and Co-lead) Tom Greene (NASA-Ames) Margaret Meixner (STScI) Mike Ressler (NASA-JPL, Instrument Scientist) Torsten Boeker (ESA-ESTEC) Thomas Henning (MPIA) Luis Colina (CSIC-IEM) STScI Instrument team

raanan
Download Presentation

MIRI Observing Templates

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Science team George Rieke (U of A, Lead) Gillian Wright (ROE, Instrument PI and Co-lead) Tom Greene (NASA-Ames) Margaret Meixner (STScI) Mike Ressler (NASA-JPL, Instrument Scientist) Torsten Boeker (ESA-ESTEC) Thomas Henning (MPIA) Luis Colina (CSIC-IEM) STScI Instrument team Christine Chen (APT/ETC) Scott Friedman (Commissioning) Karl Gordon (Calibration) Dean Hines (Operations) Rachel Anderson Misty Cracraft MIRI is a NASA/JPL-led partnership with a European Consortium sponsored by ESA NASA provides focal planes, signal chain Consortium provides optical bench assembly MIRI Observing Templates C. H. Chen

  2. MIRI Operating Configurations • Imaging •  = 5 - 27 m wavelength range • Diffraction limited imaging with 0.11” pixels • ~2 square arcmin field of view • Coronagraphy • Three 4 Quadrant Phase Masks (10.65, 11.4, and 15.5 m) • One Lyot Coronagraph (23 m) • Low Resolution Spectroscopy (LRS) • R ~ 100 from  = 5 - 10 m • Medium Resolution Spectroscopy (MRS) •  = 5 - 27 m wavelength range, goal to reach  = 28.3 m • Integral field spectroscopy with fields of view of 3” or more • R ~ 3000 - 1000 from  = 5 - 27 m C. H. Chen

  3. MIRI FOV on the Sky • For more information, see “Mid-infrared Instrument (MIRI) Operations Concept Document” Rev C edited by C. H. Chen JWST-STScI-00910 C. H. Chen

  4. MIRI Data Format Nominal Data File Coordinates In Final Format Nominal Data File Coordinates (w/Ref Output) • Reference Pixels - four pixels at the beginning and end of each row with no light sensitivity, one for each data output • Reference Output pixels - “blind” pixels interleaved with light-sensitive pixels that use a separate data output C. H. Chen

  5. MIRI Readout Patterns • FASTMode • Each pixel in the (sub-)array is sampled once and that value is returned • Full frame time 2.775 sec • Will be used to observe bright targets • SLOWMode • Each pixel in the (sub-)array is sampled 10 times, the middle 8 samples are averaged together and returned • Full frame time 27.75 sec • Will be used to observe faint targets C. H. Chen

  6. Imaging Astronomical Observation Requests • Target acquisition • Current implementation does not include target acquisition for direct imaging • The smallest subarrays (SUB64 and SUB128) may require target acquisition • User will specify TA source coordinates, TA filter, and expected brightness for the TA source in TA filter • Filter • User will select based on the science justification • Subarray • User will select based on the science justification and the brightness of the target, with guidance from ETC/APT software • Readout Pattern • User will select based on the science justification and the brightness of the target with guidence from ETC/APT software • Dither Pattern • User will select based on science justification C. H. Chen

  7. Imaging: Filter Selection C. H. Chen

  8. Imaging: Subarray Selection • For more information, see “MIRI Subarrays for Planetary Transits and Other Bright Objects” Rev. A by C. H. Chen, G. H. Rieke, & K. D. Gordon, JWST-STScI-001757 C. H. Chen

  9. Imaging: Dither Pattern Selection • Available Patterns • No Dither (for transiting extra-solar planets) • 5-Point Gaussian (SUB64, SUB128) • 12-Point Reauleaux (SUB256, BRIGHTSKY, or FULL array) • 311-Point Cycling Pattern (SUB256, BRIGHTSKY, or FULL array) • User specifies starting position in list of offsets and number of dither positions required • Available Pattern Sizes: S, M, L • Optimal pattern sizes exist based on the • For more information, see “MIRI Imaging Dither Patterns” Rev A by C. H Chen JWST-STScI-001657 C. H. Chen

  10. Coronagraphic Astronomical Observation Requests • Target acquisition • User will specify TA source coordinates, TA filter, and expected brightness for the TA source in TA filter • For more information, see “Mid-Infrared Instrument (MIRI) Target Acquisition Strategies and Use Cases” by Gordon & Meixner, 2008, JWST-001407 • Coronagraph/Filter • User will select based on the science justification • Subarray • Will be automatically selected based on Coronagraph/Filter selection • Readout Pattern • User will select based on the science justification and the brightness of the target with guidance from ETC/APT software • Dither Pattern • No dither pattern is allowed C. H. Chen

  11. Coronagraph: Coronagraph/Filter Selection 4QPM Lyot • User must select which of the following coronagraphs they would like to use: 4QPM at 10.65, 11.4, or 15.5 m or Lyot Coronagraph at 23 m C. H. Chen

  12. LRS Astronomical Observation Requests • Target acquisition • User will specify TA source coordinates, TA filter, and expected brightness for the TA source in TA filter • For more information, see “Mid-Infrared Instrument (MIRI) Low Resolution Target Acquisition for Faint Sources” by Gordon, 2008, JWST-STScI-001347 • Filter • Is automatically set to “LRS Prism” • Subarray • User will select (either LRS-Slit or LRS-Slitless) based on the science justification and the brightness of the target, with guidance from ETC/APT software • Readout Pattern • User will select based on the science justification and the brightness of the target given guidance from ETC/APT software • Dither Pattern • If LRS-Slit, then user will select based on science justification C. H. Chen

  13. LRS Slit vs LRS Slitless Observations Slitless Slit Target placed in the slit Target placed in the Lyot FOV • LRS Slit • LRS Slit Target Acquisition • FULL frame is readout • LRS Slitless • LRS Slitless Target Acquisition TBD • SLITLESSPRISM subarray is readout C. H. Chen

  14. LRS Slit Observations: Dither Pattern Selection • Point Source/Staring • Always two positions in the slit • Always 1/3 and 2/3 of the way along the slit • Extended Source/Mapping • Customizable grid of positions • User gives number of positions parallel and perpendicular to the slit • User gives offset between slit positions in direction parallel and perpendicular to the slit • For more information, see “The LRS Dither Pattern ” by C. H. Chen JWST-STScI-001634 C. H. Chen

  15. MRS Astronomical Observation Requests • Target acquisition • User will specify TA source coordinates, TA filter, and expected brightness for the TA source in TA filter • For more information, see “Mid-Infrared Instrument (MIRI) Target Acquisition Strategies and Use Cases” by Gordon & Meixner, 2008, JWST-001407 • Grating • User will select based on the science justification • Subarray • Only FULL array observations are allowed • Readout Pattern • User will select based on the science justification and the brightness of the target with guidance from ETC/APT software • Dither Pattern • User will select based on science justification C. H. Chen

  16. 10 arcseconds Each channel’s field of view is sliced, dispersed and detected. Channel 1 (4.9 - 7.7 mm) Channel 2 (7.4 - 11.8 mm) Channel 3 (11.4 - 18.2 mm) Channel 4 (17.5 - 28.8 mm) Wavelength/Velocity MRS Overview C. H. Chen

  17. MRS: Grating Selection • Select one sub-band at a time (A-”short”,B-”medium”, or C-”long”) or ALL C. H. Chen

  18. MRS: Dither Pattern Selection (TBD) Pattern 2 Pattern 1 • Pattern 1 - improved spatial sampling for all channels simultaneously • Pattern 2 - improved spatial and spectra sampling for one channel at a time (Ch 1, 2, 3, and 4 optimized patterns) • For more information, see “MIRI MRS Dither Patterns” by C. H. Chen & A. Glasse JWST-STScI-001871 C. H. Chen

More Related