SMILES AT THE EARTH
Domestic circulatorwith energy saving class A,in line with the European Directive ErP 2009/125/CE (formerly EuP),suitablefor hot or cold water circulationin heating and air conditioning systems. An easy-to-read display shows the operating mode at any moment of operation. All models equipped with insulation shells and special connector + plug for an easy power connection (thus the terminal box has not to be opened).
Available in SAN version with bronze pump body for the recirculation of sanitary water and in SOL version with cast iron pump body in cataphoresis coating for the circulation insolar and geothermal plants.
GENERAL DATA • Max. head: 4 m, 6 m and 8 m • Power absorbed reduction up to 5 Watt • Automatic night-time reduction (if needed) • Operating modes: Constant pressure: CP I - CP II Proportional pressure: PPI - PPII - PPIII Constant speed: CSI - CSII - CSIII • User friendly (installation and setting) • Easy power connection: thanks to the special connector with its own plug, the power supply is integrated directly into the plug and therefore the terminal box has not to be opened.
TECHNICAL DATA Supply Voltage 1 x 230 V – 50/60 Hz Protection Level IP 44 Insulation class F Motor power EVOTRON 40 5-27 Watt Motor power EVOTRON 60 5-43 Watt Motor power EVOTRON 80 5-66 Watt Max. Working pressure 10 bar Liquid temp. range from -10°C up to +110°C Max. % of glycole in the liquid 30 % EVOTRON 60 % EVOTRON SOL Motor overload protection is assured by the integrated frequency converter. The pump starts on high power and torque, regardless whether regulated operation or night-time reduction is set.
Data Plate Center distance (mm) Year and week production Max Head (dm) SOL = solar SAN = sanitary Series N. Power Production site Max fluid temperature Consumption Service factor
TECHNICAL DATA Pump Body - Materials and dimensions • EVOTRON: cast iron 130mm 1” 130mm 1” ½ 180mm 1” ½ 180mm 2” • EVOTRON SAN: bronze 150mm 1” ½ • EVOTRON SOL: cast iron 130mm 1” • + cataphoresis 180mm 1” ½ • coating
EVOTRON 40 Hydraulic Data EVOTRON 40 SAN & SOL P1max = 27 W EEI = 0,19
EVOTRON 60 Hydraulic Data EVOTRON 60 SAN P1max = 43 W EEI = 0,23
Hydraulic Data EVOTRON 60 SOL P1max = 43 W EEI = 0,23
EVOTRON 80 Hydraulic Data EVOTRON 80 SAN P1max = 66 W EEI = 0,23
EVOTRON 80 SOL Hydraulic Data P1max = 66 W EEI = 0,23
Insulation shell Automatic night-time reduction Single button settingsequential operation Led operation mode selected Led speed/curve selected Led night-time reduction Led remote control Alarm Led Special plug for power supply connection AT THE EARTH SMILES
Single button settingsequential operation mode Automatic night-time reduction Led constant speed Led automatic night-time reduction Led constant pressure Alarm Led Led proportional pressure Led remote control Led speed/curve selection
FAQ Operating modes • constant speed (cs) • constant pressure (cp) • proportional pressure (pp) • Applications and corrisponding operating modes: • Floor heating: CPI or CPII evt. PPIII • Radiators heating: PPI, PPII o PPIII • Air conditioning: CPI , CPII o CPIII ev. PPIII • Constant resistence (boiler supply, solar panel heating systems etc.): CSI, CSII o CSIII • Rapid venting during operation: CSIII
FAQ How is the pump supplied? • Regulation: • PPI (Lower proportional pressure) • Automatic night-time reduction disabled • Included: • Insulation shell • Plug for power connection • 2 gaskets • I &O manual
FAQ • Why does the pump have • no air vent plug? • Air venting of the pump, particularly of the rotor housing, is performed automatically after a brief period of operation (the motor shaft has an internal hole). • The permanent magnet motor starts always with high torque, thanks to that rotor blocking is almost impossible.
FAQ Automatic night-time reduction • If the temperature of the water in the system decreases by 10°C to 15°C the pump speed is reduced to the night reduction curve after aprox. 2 hours. • The pump must be installed in the delivery pipe of the heating system, after the boiler. If the pump is installed in the return pipe, before the boiler, the device doesn’t react fast enough. • With constant speed regulation selected (CS) the automatic night-time reduction is disabled. • Do not use the night reduction with wood heating systems, water heaters, heat pumps. • If the pump flow isn’t enough, this fuction must be disabled.
AC 55VA 55 FAQ How much energy does EVOTRON save compared to traditional circulators ? • The EVOTRON 60 series use 1/3of the energy used by the traditional circulator VA 55. • WHY: the permanent magnet motor is highly efficient, especially on partial load. The pump works efficiently at very low capacities.
FAQ Is EVOTRON suitable for applications in solar plants? • Yes, as SOL version resists to max. temperatures of 110°C and peaks up to 140 °C and max. 60% glycol • pump body in cast iron with cataphoresy coating to prevent rust in the water. • Constant speed regulation recommended (CS) • Note: A pump with a synchronous motor can not be connected to a solar system with traditional adjustable speed. The speed of the EVOTRON can not be modify by outside.