1 / 33

Spirometry ...

Spirometry ... . … all you ever needed to know!. How to do it . ... a quick refresher. Before you start. Prior to testing, the patient's condition should be stable (i.e. at least 6 weeks since the last exacerbation).

portia
Download Presentation

Spirometry ...

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Spirometry... … all you ever needed to know!

  2. How to do it ... ... a quick refresher

  3. Before you start • Prior to testing, the patient's condition should be stable (i.e. at least 6 weeks since the last exacerbation). • Sitting is safer than standing when performing the tests – ideally in a chair with arms and with the patient’s feet flat on the floor.

  4. Ask the patient to ... • Breathe in maximally • Hold mouthpiece between teeth, then apply lips for an airtight seal • Hold mouthpiece between teeth, then apply lips for an airtight seal • Breath out as hard and fast as possible. The patient should aim for maximal flow at the moment expiration starts • Keep breathing out until the lungs are 'empty'

  5. Relaxed or forced VC ... or both? • For most accuracy record relaxed as well as forced manoeuvres. Following a maximal inspiration ask the patient just to empty their lungs in a slow and sustained manner until they can blow out no more. In obstructive diseases the relaxed VC may often be far greater then the FVC. • Limit the total number of attempts to eight for each manoeuvre (forced VC, relaxed VC – and PEF if measured separately)

  6. What am I measuring ... and why?

  7. Most important measurements • PEF: Peak expiratory flow • FEV1: Forced expiratory volume measured at 1 second • VC: Vital capacity – this may forced (FVC) or relaxed (RVC – usually referred to as VC) • FEV1/VC ratio: (FEV1/FVC) x 100Percentage of FVC expelled in the first second of a forced expiration.

  8. What does it show …? PEF • PEF is an index of resistance to airflow through the larger airways, bronchi and larger bronchioles • i.e it is a measure of how quickly air can be expelled from the airways! • Indicates presence of airflow obstruction • NB: PEFdoes not distinguish between obstruction and restriction of airflow, and may seriously underestimate the degree of airflow obstruction in COPD.

  9. FEV1/FVC ratio • (FEV1/FVC)x100 • Percentage of FVC expelled in the first second of a forced expiration • NB: for increased accuracy use whichever vital capacity measurement (relaxed or forced) gives the best result - (FEV1/FVC)x100 or (FEV1/VC)x100

  10. FEV1 • FEV1 demonstrates the amount of air that can be expelled forcefully in one second • This is a function of the size and elastic properties of the lungs, the calibre of the bronchial tree and the collapsibility of the airway walls • Indicates type of respiratory disease (restrictive or obstructive) • Severity of airflow limitation

  11. Remember ... • FEV1 is reproducible and objective with well defined normal ranges • Variation on different occasions on the same patient is low (<170 ml) • Serial measurements provide evidence of disease progression

  12. VC • VC demonstrates the volume of air that can be expired from a full inspiration • Simple measure of the size of the lungs • May be reduced due to small lung size or loss of elasticity and airway collapsedue to airflow obstruction (i.e. in restrictiveor obstructive disorders)

  13. FEV1/FVC ratio • Useful to differentiate between obstructive and restrictive results • The hallmark of an obstructive defect is slowing of expiratory flow, so that a low proportion of the FVC is expired in the first second and the FEV1/FVC ratio is reduced • A ratio of <70% implies obstructive disease.

  14. Obstructive or restrictive? • In the elderly, the FEV1/FVC may fall to <70% in the absence of airways obstruction, so compare to predicted values to determine if obstruction present • If the value is >70%, obstruction is effectively excluded in everyone • If the patient has a restrictive ventilatory defect the FEV1 and FVC are both reduced, but in proportion, so the FEV1/FVC ratio remains normal (greater than 75%)

  15. Result selection

  16. Reporting results • Minimum of 3 acceptable spirometric manoeuvres • 2 highest values must be within 5% or 100 mls for FEV1 , VC and FVC • 2 highest values must be within 60 L/sec for PEF • Select highest FEV1 and VC value • Even if they are not from the same attempt

  17. ‘Best test’ results • Automatic computerised spirometers often select ‘best test’ results • ie the acceptable manoeuvre with largest value when FEV1 and VC added together • BEWARE: Spirometer does not always select highest value obtained out of all attempts !

  18. Problems encountered and recognition of acceptable results

  19. Observe patient performing tests: • patient did not inspire to TLC/blow out to RV • a leak at the mouth/nose • obstructed mouthpiece due to tongue/teeth • poorly co-ordinated start to manoeuvre • cough within first second of blow • early termination of blow • test conducted with submaximal effort

  20. Observe tracings obtained:

  21. Normal and Predicted Values

  22. Reference Values • Common practice to compare measurement/calculated value with a reference or predicted value • Comparison provides basis for interpretation • Not a good diagnostic tool, but may be useful to exclude disease

  23. Interpret with caution! The use of reference values raises some concerns: • Insufficient values for certain race and age groups (e.g. >70 years)

  24. Are the results normal? • Normal subject can expire 50-60% VC in 0.5 seconds, 75-85% VC in 1 second, 94% in 2 seconds, 97% in 3 seconds and entire VC in 4 seconds • Slightly lower ratios are nomal in elderly adults

  25. Subjects with obstructive disease will show a reduced FEV1/VC ratio • Ratio less than 70% indicative of airflow obstruction • Subjects with restrictive disease will show a normal or supranormal FEV1/VC ratio • Flow rates minimally effected • FEV1 and VC reduced in same proportion

  26. Remember … • Validity of interpretation depends on recognition of subject effort and co-operation performing tests • Poor effort on VC can lead to overestimation of FEV1/VC ratio • Poor effort on FEV1 can lead to misdiagnosis of disease

  27. Deterioration over time? • Expected decrease in FEV1 and VC due to aging is approximately 25-30 ml/year

  28. Clinically significant change • Week to week change in VC >11% • Week to week change in FEV1 >12% • Yearly changes in FEV1 or VC >15%

  29. Result reporting

  30. What do you need to know? • Is the FEV1 normal or reduced? • Is the VC normal or reduced? • Is the FEV1/VC ratio normal, reduced or high? • Is PEF normal or reduced? • Are the results within normal limits?

  31. Do the results demonstrate an obstructive or restrictive defect? • Is this mild, moderate or severe? • Do you need to check for reversible airflow obstruction? • Which inhaler will you use? • What dose?

  32. Normal spirometry: • FEV1, FVC, VC, PEF >80% predicted • FEV1/VC ratio >70% predicted Obstructive defect: • low FEV1 (<80%) • low FEV1/VC ratio (<70%) • VC normal or low Severity graded on % predicted for FEV1

  33. Restrictive defect: • FEV1 normal or low • normal or high FEV1/VC ratio • low VC Severity graded on % predicted for VC Severity: Mild: 50 - 80% predicted Moderate: 30 - 49% predicted Severe: <30% predicted Reversibility: > 400 ml increase in FEV1

More Related