1 / 27

Anti-Interference and Jamming Techniques

Anti-Interference and Jamming Techniques. Agenda. Overview General Interference Testing Interference Signal Generators Embedded Interference Signal Generation CRPA Testing CRPA Overview Laboratory Testing with Embedded Interference Anechoic Chamber Testing

pelham
Download Presentation

Anti-Interference and Jamming Techniques

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Anti-Interference and Jamming Techniques Proprietary & Confidential—Page 1

  2. Agenda • Overview • General Interference Testing • Interference Signal Generators • Embedded Interference Signal Generation • CRPA Testing • CRPA Overview • Laboratory Testing with Embedded Interference • Anechoic Chamber Testing • Laboratory Testing with Phase Shift Matrix Proprietary & Confidential—Page 2

  3. Interference Threats Like other RF communication, GPS and other GNSS signals are susceptible to interference Interference is of particular significance for GNSS/GPS, which has very low received power, well below the noise floor There are many sources of interference, both unintentional and intentional: AM and FM modulated signals from radio, mobile and other communication systems pulsed continuous wave (CW) or noise sources from a radar system CW or swept CW for a generic signal coming in and out of the GPS band Electromagnetic interference (EMI) from other equipment Jammers Proprietary & Confidential—Page 3

  4. Interference Testing • Tests are conducted to determine how receivers and systems perform when subjected to different kinds of interference • There are benefits to using simulators for testing, instead of live field trials • Laboratory conditions • Controlled and repeatable testing • Avoid restrictions against jamming in public • The general techniques immediately following are suitable for testing traditional FRPA (Fixed Reception Pattern Antenna) systems • The specialized techniques following later are needed for testing CRPA (Controlled Reception Pattern Antenna) systems Proprietary & Confidential—Page 4

  5. Interference Signal Generators • Spirent GSS7765 is used in combination with Spirent GPS/GNSS simulators • GSS7765 consists of • Up to 4 interference signal generators • Interference Combiner Unit (ICU) to combine GPS/GNSS RF • SimGEN controls the GPS/GNSS simulation with interference • Programmed interference source locations • Automatic and manual controls for interference power levels Proprietary & Confidential—Page 5

  6. GSS7765 Interference Signals • GSS7765 signal generators offer the following types of interference signals • CW (coherent or non-coherent, wrt GNSS) – a generic signal • Swept CW – as above, with ability to move in and out of GNSS band • AM and FM – radio, mobile and other comms systems • Gaussian Noise – any source of spread-spectrum signal where encoding is unknown to receiver • Pulsed CW – radar, for example • Pulses noise Proprietary & Confidential—Page 6

  7. GSS7765 Interference Combiner Unit • The GSS7765 ICU combines the GPS/GNSS and interference RF signals • An ICU is shown here configured for 2 RF outputs, and with 4 interference sources Interference Signal Generators Proprietary & Confidential—Page 7

  8. Interference File • Add “Interference” to antenna • Access “Interference file” from Antenna Options • Allows time-ordered list of commands • Two interference modes = “Fixed” & “Modelled” • Four standard signal types = “CW”, “AM”, “FM” & “Pulse” • One advanced signal type = “Noise” (require higher spec signal generator model) Proprietary & Confidential—Page 8

  9. Interference File Commands • Commands must be in chronological order • Each command specifies • One of four possible interference channels (a single STR4765 equates to one channel) • The signal type required and any signal specific parameter settings • Signal power defines “received” signal level • Fixed mode • Designates an interference source that ‘moves’ with vehicle to give a constant, ‘fixed’ power throughout scenario • Modelled mode • Designates a static interference source location, lat/long/hgt, (shown on ground track) • Signal power follows 1/r2 relationship and specified “power level” designates INITIAL power at scenario start Proprietary & Confidential—Page 9

  10. Interactive Interference Control • Access by clicking “Interactive Interference” toolbar button • Enables quick-access to interference control • Manual control during scenario run for all four channels • No need to prepare timed-order commands; but • Can switch between file and interactive controls as necessary • Interactive window allows • Full “fixed” mode like control • View signal settings during “file” playback • “Modelled” mode control not supported Proprietary & Confidential—Page 10

  11. Interference & Quick-Look Data • Use Quick-Look Data controls to access interference signal data • (see previous session on quick-look data) • “Interference” Tx type allows “Antenna” and “Signal” keyword sets only • “Ground Tx” Tx type allows “Antenna”, “Signal” and “Transmitter” only • Example shows • two “modelled” mode interference sources “Jam1” & “Jam2” • Plots of received power from each interferer • Vehicle moving away from Jam2 • Vehicle moving toward Jam1 Proprietary & Confidential—Page 11

  12. Embedded Interference Signals • The 2 RF output configuration of Spirent GSS8000 supports internal (“embedded”) generation of in-band L1 and/or L2 interference signals combined with GPS • Up to (12 L1 + 12 L2) GPS + (12 L1 + 12 L2) Interference • Also available in alternate configuration,up to (16 L1 + 16 L2) GPS + (8 L1 + 8 L2) Interference • Coherent GPS and interference signals • Up to 61dB Interference-to-Signal (I/S) • SimGEN controls thesimulation of GPS andinterference • Programmed interference source locations Proprietary & Confidential—Page 12

  13. GSS8000 Embedded Interference • The first bank of channels generates GPS • The second bank of channels generates interference • The high-power interference output is fed back and combined with GPS into coherent RF output High PowerOut 2 GSS8000 Bank #2 InterferenceL1 + L2 Bank #1 GPS L1 + L2 RF Out 1 Jammer In 1 SimGEN PC Ethernet Proprietary & Confidential—Page 13

  14. Embedded Interference Signals • The GSS8000 offers the following types of interference signals • CW • BPSK • Using a PRN code derived from GPS L5 • 10.23 MHz BW • Other interference waveforms could be developed, as needed Proprietary & Confidential—Page 14

  15. Embedded Interference “Ground Tx” • Add Ground Tx (GTx) signal type to antenna • Access GTx sources file to configure • 2 Main Sections GTx locations GTx signal characteristics Proprietary & Confidential—Page 15

  16. GTx Location • Set the location of each GTx • Choose “Absolute” or “Relative” position mode • Absolute • Set Lat/Long/Hgt for each GTx; or • Use “Define Cells” to create a cellular layout defining cell centre • Relative • Set GTx distance from vehicle start CofG position; or • Use “Map editor” to simply drag-and-drop each GTx into position required from vehicle CofG Proprietary & Confidential—Page 16

  17. GTx Signal Control • Select “Modelled” or “Fixed” power mode • Select “CW” or “PSK” signal type • “PSK Code” = PRN code derived from GPS L5 (10.23MHz BW with sin(x)/x waveform) • “Freq Offset” = offset from GPS L1 • “Fixed Power” = if “Fixed” has been in ‘General’ section • Modelled Power • Set transmitter launch power; or • Use “Rx power” to set vehicle antenna received power relative to distance from GTx • Off Times Proprietary & Confidential—Page 17

  18. Embedded Interference Ground Track Tx = Interference source “x” location on ground track graphic Proprietary & Confidential—Page 18

  19. CRPA Overview • Controlled Reception Pattern Antenna • Consists of a multi-element antenna and an antenna electronics (AE) unit for processing the signals from each element • Military applications • Some commercial • Null Generation • Reduces antenna gain in thedirection of interference • Beam Forming • Creates high gain beams in thedirection of satellites Antenna Electronics 7-element Antenna Proprietary & Confidential—Page 19

  20. CRPA Gain Adjustment Jammer GPS (OK) ReceptionAntenna Gain N GPS (attenuated) Proprietary & Confidential—Page 20

  21. CRPA Testing Challenges • CRPAs have multiple antenna elements • Testing requires providing suitable RF signals to each element • CRPAs determine the directions of interference signals by detecting timing and phase differences between the signals arriving at the different antenna elements • Testing requires proper timing and phase relationships between the signals provided to each element • The timing and phase of the interference signals must be coherent with the GPS signals • Timing and phase relationships must be maintained, even with dynamic vehicle motion Proprietary & Confidential—Page 21

  22. CRPA Testing with Embedded Interference • Multiple Spirent GSS8000s simulators can be combined into a CRPA test system, with each GSS8000 generating the combined GPS and interference signals for one CRPA element • Coaxial cables are connected directly to theCRPA antenna electronics unit, bypassing the CRPA antenna RF Inputs Antenna Electronics (AE) Proprietary & Confidential—Page 22

  23. GSS8000 CRPA Tester Configuration • A single SimGEN PC controls the entire system • Additional amplifiers can boost the I/S to higher levels • All capabilities of the GSS8000 are supported, including SA/AS and modernized signals • Interference signals are generated internally with GPS, and are kept coherent with GPS, even with vehicle dynamics • Each GSS8000 generates GPS (L1 + L2) and interference (L1 + L2) for one antenna element Proprietary & Confidential—Page 23

  24. CRPA Testing in Anechoic Chamber • A Spirent GSS7790 simulator generates RF signals for individual satellites, which are transmitted through antennas positioned along the satellite lines of sight relative to the CRPA system • Scenarios typically last no more than 30 minutes, because the satellite locations are static • Independent interference sources can be placed in the chamber • The actual CRPA antenna is used in the testing • Vehicle motion typically is limited Proprietary & Confidential—Page 24

  25. Generates separate L1 and L2 RF outputs for each GPS satellite Up to 12 L1 + 12 L2 channels One RF output per channel Supports SA/AS and modernized signals Provides increased power at each individual output for enhanced flexibility, and to compensate for transmission path losses GSS7790 Multi-output Simulator Proprietary & Confidential—Page 25

  26. CRPA Testing with Phase-Shift Matrix • A GPS7790 simulator can also provide GPS signals for use with a phase-shift matrix or more complex DSP system • The DSP system combines the GPS and independently-generated interference signals, and makes the timing and phase adjustments needed for each antenna element Proprietary & Confidential—Page 26

  27. Example of GSS7790 with DSP System • This is an example of a CRPA test solution consisting of a GSS7790 combined with a complex DSP system • The DSP system combines signals and introduces delays in the digital domain, and then upconverts the results back to L1 and L2 RF outputs • Coaxial cables connect the RF outputs directly to the CRPA antenna electronics unit, bypassing the CRPA antenna • Spirent collaborated with the company that built this system – Spirent provides GSS7790 simulators, but does not offer DSP systems such as this Proprietary & Confidential—Page 27

More Related