1 / 5

HD Tools & Information Amendments for 2010+ Vehicles

The California Environmental Protection Agency Air Resources Board proposes amendments to reinstate tools and information requirements for 2010 and later heavy-duty vehicles and engines. The amendments include all dealer tools, data stream and bi-directional information, and reprogramming in line with SAE J2534 or RP1210a. Contact Dean Hermano for more information.

pcornejo
Download Presentation

HD Tools & Information Amendments for 2010+ Vehicles

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. California Environmental Protection Agency Air Resources Board HEAVY-DUTY TOOLS AND INFORMATION(SERVICE INFORMATION RULEMAKING) February 16, 2005

  2. BACKGROUND • At January 2004 Hearing, the Board Approved Amendments to the Service Information Regulation • Scope of Regulation Expanded to 2007 and Later Heavy-Duty Vehicles, Engines, and Transmissions

  3. BACKGROUND (Con’t) • HD Manufacturer Concerns with Tools and Information Liability • Multiple Engine Ratings and Configurations • Performance and Safety Issues • At May 2004 Hearing, ARB Deleted Tool Requirements until Full OBD Requirements are Proposed • EMD is Only First Stage • Lead Time Needed to Make Tools Safe

  4. PROPOSED AMENDMENTS • Reinstate Tools and Information Requirements for 2010 and Later HD Vehicles and Engines • All Dealer Tools • All Data Stream and Bi-Directional Information for Use in Aftermarket Tools • Reprogramming to be Consistent with SAE J2534 (Dec. 2004) or RP1210a • SAE J2403 Nomenclature • “Diagnostic Message 8” Data (SAE J1939-73)

  5. PROPOSED AMENDMENTS • Amendments Available From: www.arb.ca.gov/msprog/cmvsip/cmvsip.htm • Contact Info: • Dean Hermano dhermano@arb.ca.gov 626-459-4487

More Related