1 / 27

Jens Verbeeck TWEPP 2010

Design and Assessment of a Robust Voltage Amplifier with 2.5 GHz GBW and >100 kGy Total Dose Tolerance. Jens Verbeeck TWEPP 2010. Outline. Introduction Radiation and temperature effects Constant g m amplifier Matching structure Conclusions. Outline. Introduction

overton
Download Presentation

Jens Verbeeck TWEPP 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Design and Assessment of a Robust Voltage Amplifier with 2.5 GHz GBW and >100 kGy Total Dose Tolerance Jens Verbeeck TWEPP 2010

  2. Outline • Introduction • Radiation and temperature effects • Constant gm amplifier • Matching structure • Conclusions Presentation: Jens Verbeeck

  3. Outline • Introduction • Radiation and temperature effects • Constant gm amplifier • Matching structure • Conclusions Presentation: Jens Verbeeck

  4. Introduction • Development of optical instrumentation and communication for nuclear and high temperature environments • Applicable for • MYRRHA • ITER • LHC • Space Presentation: Jens Verbeeck

  5. Optical instrumentation PD: Photo diode TIA: Transimpedance amplifier LA: Limiting amplifier AGC: Automatic gain controller TDC: Time to digital converter Presentation: Jens Verbeeck

  6. Optical instrumentation • Goal • LIDAR with psaccuracy, distance =10m • Current status • TDC with ps resolution developed and irradiated up to 5MGy (Ying Cao) • November tape-out receiver channel Presentation: Jens Verbeeck

  7. Outline • Introduction • Radiation and temperature effects • Constant gm amplifier • Matching as a function of radiation dose • Conclusions Presentation: Jens Verbeeck

  8. Radiation : Introduction TID Oxide: Net positive charge trapped at the oxide • Si-SiO2 interface: • vg > 0 => +∆vth (NMOS) • vg < 0 => -∆vth (PMOS) [Hugh J. Barnaby] [Hugh J. Barnaby] Presentation: Jens Verbeeck

  9. Temperature: effects Decrease of mobility Increase of leakage current [M. Willander] [P. C. de Jong et. al.] T Decrease of VTH Decrease of gm Presentation: Jens Verbeeck

  10. Outline • Introduction • Radiation and temperature effects • Constant gm amplifier • Matching as structure • Conclusions Presentation: Jens Verbeeck

  11. Opticalreceiver • Classical building blocks • Transimpedance amplifier (TIA) • Post amplifier (PA) • Time to digital convertor (TDC) Presentation: Jens Verbeeck

  12. Constant gm amplifier: Why? • Radiation/temperature causes variation in TIA parameters • gmand routvariable in formula A0 • Make gain independent of gm and rout Presentation: Jens Verbeeck

  13. Constant gm amplifier: Why? Radiation up to 300 kGy (M. Manghisoni et al.) Temperature (-40 up to 130°C) Presentation: Jens Verbeeck

  14. Constant gm amplifier: Operation • RDSTOT >> RL • Transistor length ↑ • Trade-off: BB <=> temp/RAD tolerance [B.Razavi] [Sean Nicalson et al.] Presentation: Jens Verbeeck

  15. Temperature simulations • Degradation with bias : 2.5 % Temperature sweep from 0°Cto 100°C Gain =14dB GBW = 2.5Ghz BB = 500MHz Presentation: Jens Verbeeck

  16. Radiation simulations • Degradation with bias : 0.85 % Amplifier irradiated up to 300kGy Presentation: Jens Verbeeck

  17. Results Temperature drift5.6 % or 343 ppm/°C Radiation up to 100 kGy Gain degradation 4.5% Presentation: Jens Verbeeck

  18. Results: Radiation Cause degradation? • VTHsens= Standard deviation • beforeradiation of M1 and M2 • ∆ VTHsens= Variation of VTHsens Impact of a ∆VTHsens of 10% on the gain of the amplifier. Large VGS –VTH for high radiationtolerance gm = 2*IDS/(VGS-VTH) => IDS↑↑ & VDSsat↑↑ Presentation: Jens Verbeeck

  19. Layout Presentation: Jens Verbeeck

  20. Outline • Introduction • Radiation and temperature effects • Constant gm amplifier • Matching structure • Conclusions Presentation: Jens Verbeeck

  21. Matching • Standard deviation between identical components fabricated on the same chip =>small statistic variations = MISMATCH • Good matching • good PSRR, CMRR • Important for replica biasing • Reduces offset • Matching of Vth depends strongly on area transistor Presentation: Jens Verbeeck

  22. Matching • Layout transistors on chip • Drains connected in each column • Gates connected in each row • Shared source and bulk • 6 regular transistors, 6 Enclosed layout transistors [G. Annelie et al.] Presentation: Jens Verbeeck

  23. Radiation effects up to RD of 100kGy Regular NMOS transistors • Decrease of VTH • Rebound effect • RINCE effect [F. Faccio] • Different effect for large gates • Radiation Induced • Narrow Channel Effect • Standard deviation VTH –shift! => • No significant effects ELT transistors Presentation: Jens Verbeeck

  24. Outline • Introduction • Radiation and temperature effects • Constant gm amplifier • Transistor measurements • Conclusions Presentation: Jens Verbeeck

  25. Conclusions • Effects of radiation and temperature • Change of transistor parameters • Varying gain • Gain can be held stable with constant gm amplifier • BW and GBW of optical receiver guaranteed • Open loop control • Generate bias voltages for whole chip with gm biasing • Trade off: bandwidth  temperature tolerance • Trade off: current consumption & voltage headroom  rad. Tolerance • Larger VGS-VTH => VDSsat ↑↑  difficult to keep transistors in saturation at high temperatures. • Matching results • Decrease of VTH • VTH-shift depending on transistor width • Standard deviation VTH –shift Presentation: Jens Verbeeck

  26. Questions ? Acknowledgments to: Presentation: Jens Verbeeck

  27. References • M. Manghisoni, L. Ratti, V. Re and V. Speziali, “Radiation hardness perspectives for the design of analog detector readout circuits in the 0.18-µm CMOS Generation”, Transactions on nuclear science, VOL. 49 NO. 6, December 2002 • Hugh J. Barnaby, “Total-Dose Effects in Modern Integrated Circuit Technologies” IEEE NSREC, 2005 • F. Faccio, G. Cervelli, “Radiation-Induced Edge effects in Deep Submicron CMOS transistors”, Transactions on nuclear science, VOL. 52 NO. 6, December 2005 • M. Willander and H. L. Hartnagel (eds.), High Temperature Electronics, Chapman & Hall, London, 1997. • P. C. de Jong, G. C. M. Meijer, and A. H. M. van Roermund, “A 300 °C dynamic feedback instrumentation amplifier,” IEEE J. Solid-State Circuits, vol. 33, no.12, pp. 1999-2009, Dec. 1998. • Sean Nicalson and KhomanPhang, “Improvements in biasing and compensation of cmosopamps”, ISCAS 2004 • B. Razavi, “Design of analog integrated circuits” • G. Anelli et al.,“ Radiation tolerant VLSI circuits in standard deep submicron CMOS technologies for the LHC experiments: Practical design aspects,” IEEE Trans. Nucl. Sci., vol. 46, no. 6, pp. 1690–1696, Dec.1999. Presentation: Jens Verbeeck

More Related