Cover
Download
1 / 42

Cover - PowerPoint PPT Presentation


  • 267 Views
  • Updated On :

Cover ASTRO ® XTS TM 2500 Model II Digital Portable Radio Yuma Regional Communications System Your Radio 16-Position Select Knob 3-Position Concentric Switch Zone Select 10 : 46AM YPD PATROL Power On/Off Volume Control BATT ZONE PROG Top Button Emergency Control Top

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'Cover' - ostinmannual


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
Cover l.jpg
Cover

ASTRO® XTSTM 2500

Model II

Digital Portable Radio

Yuma Regional Communications System


Your radio l.jpg
Your Radio

16-Position Select Knob

3-Position Concentric Switch

  • Zone Select

10 : 46AM

YPD

PATROL

Power On/Off

Volume Control

BATT

ZONE

PROG

Top Button

Emergency

Control Top

Side Buttons

Top Side Button: Cnv: Monitor

Trk: Site Display

Push-To-Talk

(PTT) Button

Side Button 1:

Volume Set

Menu Options

Side Button 2 Cnv: Direct

Trk: Keypad Lock

Side Button 1 Options

Call Alert Page (Respond)

Call Alert Page (Send)

Call Response

Direct/TalkAround

Display Light

Dynamic Priority

Emergency

ID Number (View Your) – Call Button

ID Number (View Your) – Page Button

Monitor

Nuisance Channel Delete

Phone Call (Place)

Phone Call (Respond)

Private Conversation Call (Place)

Private Conversation Call (Respond)

Scan On or Off

Site Lock

Site View/Search

Status/Message Calls

Talkgroup Calls

Volume Set Tone

Side Button 2 Options

Call Alert Page (Respond)

Call Alert Page (Send)

Call Response

Direct/TalkAround

Display Light

Dynamic Priority

Emergency

ID Number (View Your) – Call Button

ID Number (View Your) – Page Button

Monitor

Nuisance Channel Delete

Phone Call (Place)

Phone Call (Respond)

Private Conversation Call (Place)

Private Conversation Call (Respond)

Scan On or Off

Site Lock

Site View/Search

Status/Message Calls

Talkgroup Calls

Volume Set Tone

Top Side Button Options

Call Alert Page (Respond)

Call Alert Page (Send)

Call Response

Direct/TalkAround

Display Light

Dynamic Priority

Emergency

ID Number (View Your) – Call Button

ID Number (View Your) – Page Button

Monitor

Nuisance Channel Delete

Phone Call (Place)

Phone Call (Respond)

Private Conversation Call (Place)

Private Conversation Call (Respond)

Scan On or Off

Site Lock

Site View/Search

Status/Message Calls

Talkgroup Calls

Volume Set Tone

Top Button Options

Call Alert Page (Respond)

Call Alert Page (Send)

Call Response

Direct/TalkAround

Display Light

Dynamic Priority

Emergency

ID Number (View Your) – Call Button

ID Number (View Your) – Page Button

Monitor

Nuisance Channel Delete

Phone Call (Place)

Phone Call (Respond)

Private Conversation Call (Place)

Private Conversation Call (Respond)

Scan On or Off

Site Lock

Site View/Search

Status/Message Calls

Talkgroup Calls

Volume Set Tone


Status symbols 1 of 2 l.jpg
Status Symbols – 1 of 2

Signal

Strength

Direct/

TalkAround

Monitor

Scan

Battery

Status

View

Program

Secure

Call

Receive

Continued on next slide.




Led status l.jpg
LED Status

  • RED

  • Solid

  • - PTT is pressed; radio is transmitting

  • Flashing

  • - Channel Busy

  • - Low Battery (lights while transmitting)

  • GREEN

  • Solid

  • - Self-test being performed

  • Flashing

  • - Incoming Private Call

GREEN LED

RED LED


Installation and removal procedures l.jpg
Installation andRemoval Procedures

Antenna

Battery

Belt Clip

Universal Connector


Antenna l.jpg
Antenna

  • To install the antenna:

  • Turn the radio off.

  • Screw the antenna (clockwise) into the antenna receptacle on top of the radio.

  • Tighten the antenna firmly with your fingers.

  • To remove the antenna:

  • Turn the radio off.

  • Unscrew the antenna (counter-clockwise) and remove it from the antenna receptacle on top of the radio.


Charging the battery l.jpg
Charging the Battery

The battery must be charged before use. Memory effect

is a phenomenon that causes a loss in battery capacity

or voltage due to repetitive shallow discharging or

long-term overcharging. This memory effect has been

greatly reduced in your batteries through the use of

new cell technology. It is still recommended, however,

that you discharge your battery as much as possible

before recharging it. Recharging after each shift is

good standard practice. When charging a battery that

is attached to your radio, turn the radio off to ensure a

full charge.

Battery procedures continued on next panel.


Battery l.jpg
Battery

  • To install the battery:

  • Turn the radio off.

  • Align the three tabs at the bottom of the battery with the three slots at the bottom of the back of the radio.

  • Angle the battery forward toward the radio until the battery clicks into place.

  • To remove the battery:

  • Turn the radio off.

  • Holding the radio in one hand, push down on the battery release slides on both sides of the battery with the other hand.

  • Angle the battery away from the radio and remove.


Universal connector cover l.jpg
Universal Connector Cover

  • The universal connector cover protects the side

  • connector near the antenna.

  • To remove the cover:

  • Turn the radio off.

  • Carefully insert a flat-bladed screwdriver between the bottom of the cover and the connector.

  • Holding the top of the cover with your thumb, push the screwdriver gently downward and lever the cover away from the radio.

  • To install the cover:

  • Turn the radio off.

  • Insert the hooked end of the cover into the slot above the connector.

  • Rub the ball of your thumb from the top to the bottom of the cover, applying pressure towards the radio. This will flex the cover and snap it into place.


Belt clip l.jpg
Belt Clip

  • To install the belt clip:

  • Remove battery before installing or removing the belt clip.

  • Hold the battery with the back of the battery facing you.

  • Hold the belt clip with the top facing upward, and align the clip with the slots on the battery back.

  • Slide the belt clip downward into the slots until it clicks into place.

  • To remove the belt clip:

  • Pull away the metal tab at the top of the battery clip from the battery.

  • Slide the clip upward until it comes away from the radio.

1

2


Rf adapter rfa l.jpg
RF Adapter (RFA)

  • To install the RF adapter (RFA):

  • Turn the radio off.

  • Remove the antenna.

  • With your hand above the RFA, hold the RFA in the upright position using your thumb and finger and position it on the radio antenna bushing.

  • Turn the RFA collar and housing (together) clockwise to engage the collar with the threads on the outside of the radio antenna bushing. Turn it until it has rotated between one and two full turns. Watch the position of the collar and connector target to count the number of turns. If it becomes difficult to turn, DO NOT FORCE IT.

  • While maintaining downward pressure on the properly oriented switch housing, place the custom wrench all the way onto the RFA collar’s wrench flats. The wrench will be captured by the collar and will be unable to slip upward or downward. Turn the wrench in increments until the RFA is tightened very securely to the antenna bushing (10-14 turns).


Public safety speaker microphone l.jpg
Public SafetySpeaker/Microphone

Increase Volume

Emergency

Note: When mic is installed, volume and channel buttons are disabled on the radio. Must be contralled on the mic.

Note: Side buttons on mic are same as the side buttons on the radio

Decrease Volume

Volume Set

Cnv: Direct

Trk: Keypad Lock


Public safety speaker microphone installation pssm 1 of 3 l.jpg
Public SafetySpeaker/Microphone Installation (PSSM) – 1 of 3

  • To install the PSSM:

  • Turn the radio off.

  • Follow the instructions for removing the universal connector cover.

  • Attach the accessory connector to the radio’s universal connector as follows:

    • a. Make sure the RF adapter has been installed in your radio before continuing with installation.

    • b. Looking at the antenna side of the radio, insert the bottom hooked end of the accessory connector into the slot below the universal connector.

    • c. While holding the accessory connector seated in the bottom slot, pivot the top of the accessory connector toward the radio until its RF interface connector aligns with the circular contact target on the RF adapter, then engage the accessory connector’s spring-loaded latch in the radio’s top slot.

  • Continued....


Public safety speaker microphone installation pssm 2 of 3 l.jpg
Public SafetySpeaker/Microphone Installation (PSSM) – 2 of 3

  • Attach the correct (frequency-sensitive) antenna to the PSSM by screwing the antenna’s threaded end into the threaded antenna jack on top of the PSSM’s housing.

  • Rotate the antenna clockwise into the jack until it seats firmly.

  • The public safety speaker/microphone performs best

  • when it is operated with the antenna above the user’s

  • shoulder.

  • To transmit using the public safety speaker/microphone,

  • press the PSSM’s PTT and speak into the microphone’s

  • grille area. The red light-emitting diode (LED) on top of the

  • radio will light, indicating that the radio is in the transmit

  • mode.

  • If a more permanent attachment is desired after the

  • accessory connector is latched to the radio, secure the

  • latch to the connector housing using the screw supplied.


Public safety speaker microphone installation pssm 3 of 3 l.jpg
Public SafetySpeaker/Microphone Installation (PSSM) – 3 of 3

  • To remove the PSSM:

  • Turn the radio off.

  • Rotate the antenna counter-clockwise to unscrew it from the jack.

  • Remove the accessory connector by pivoting the top of the accessory connector away from the radio until it disengages from the RF adapter.

  • Follow the instructions for attaching the universal connector cover.



Radio on off volume l.jpg
Radio On/Off/Volume

To turn the radio on:

Turn the On/Off/Volume Control knob clockwise.

If the power-up test is successful, you briefly see SELF

TEST, then the home display. If enabled, a power-up tone

is also heard.

If the power-up test is unsuccessful, you see ERROR

XX/YY. (XX/YY is an alphanumeric code.)

To turn the radio off:

Turn the On/Off/Volume Control knob counter-clockwise

until it clicks.

On/Off/Volume

Knob

SELF TEST


Channel mode select 16 position select knob l.jpg
Channel/Mode Select(16-Position Select Knob)

Channel/Mode

Name

  • To select a channel/mode:

  • Rotate the 16-Position Channel/Mode Select knob to the desired position.

  • The new name will appear on the display.

  • If the channel/mode you selected is unprogrammed,

  • repeat the above step.

Channel/Mode

Knob

YPD

PATROL

BATT

ZONE

PROG


Time out timer l.jpg
Time-out Timer

  • The time-out timer turns off your radio’s transmitter.

  • The timer is set for 60 seconds at the factory, but it

  • can be programmed from 0 to 7.75 minutes (465

  • seconds) by a qualified radio technician.

  • Hold down the PTT button longer than the programmed time.

  • You will hear a low-pitched warning tone, the

  • transmission will cut off, and the LED will go out until you

  • release the PTT.

  • Release the PTT button.

  • The LED will re-light and the timer will reset.

  • Press the PTT button to re-transmit. The time-out timer restarts.

  • The timer will restart and the LED lights red.

LED

Push-to-Talk

(PTT)


Transmit and receive l.jpg
Transmit and Receive

  • To transmit:

  • Select the desired zone/channel.

  • Listen for ongoing conversations; if the channel becomes clear, proceed with your call.

  • Press and hold the PTT button to transmit and wait for the “Talk Permit” tone. The LED will light red. When speaking, keep the microphone 1-2" from your mouth.

  • Note: If you do not hear a Talk Permit tone, your system

  • administrator has preprogrammed the tone to be off.

  • Release the PTT button to receive (listen).

LED

Push-to-Talk

(PTT)



Zone select 3 position concentric switch l.jpg
Zone Select(3-Position Concentric Switch)

  • To select a zone:

  • Select zone A, B, or C using the 3-Position Zone Select switch.

  • If the zone you selected is unprogrammed, repeat step 1.

  • Press the Home button to confirm the displayed zone and channel.

Zone Name

Zone Select

Switch

YPD

PATROL

BATT

ZONE

PROG

NOTE: This is a quick way to select the first three zones. Additional zones may be selected from the menu.



Emergency send emergency call top button l.jpg
Emergency – SendEmergency Call(Top Button)

  • To initiate an emergency:

  • 1. Press the Emergency button. A tone sounds and the display

  • Alternates EMERGENCY with the current zone/channel, the LED lights red, and you hear a group of short, medium-pitched tones.

  • 2. Mic will be open for 10 seconds, announce your emergency. After 10 seconds press the PTT button to continue your emergency traffic.

  • 3. After completing the emergency call, press and hold the emergency button for one second.

  • The alternating EMERGENCY display disappears, and the radio returns to normal operation.

  • NOTE: Emergency call will revert to the emergency channel. Mic will be open for 10 seconds.

  • NOTE: You must shut off emergency before changing modes or you will continue sending alarms.

EMERGENCY

BATT

ZONE

PROG

LED

Emergency



Monitor conventional top side button l.jpg
Monitor (Conventional) (Top Side Button)

  • Your radio may be programmed to receive Private

  • Line(PL) calls.

  • To enable the monitor feature:

  • Select a conventional channel from the channel mapping list.

  • Momentarily press the Monitor button to listen for activity.

  • The monitor/carrier squelch indicator ( )is displayed.

  • Press and hold the Monitor button to set continuous monitor operation.

  • Press the Monitor button again, or the PTT button, to return to the original squelch setting.

  • Note: If you try to transmit on a receive-only channel, you

  • will hear an invalid tone until you release the PTT button.

Monitor Button

CONVENTIONAL

Push-to-Talk

(PTT)


Site view search top side button l.jpg
Site View/Search(Top Side Button)

  • You can view the number of the current site or force

  • your radio to change to a new one.

  • To view the current site:

  • Press the Site Search button.

  • The display momentarily shows the name of the current

  • site and its corresponding received signal strength

  • indicator (RSSI).

  • OR

  • If the radio is scanning for a new site, you momentarily see SCANING SITE displayed.

  • To change the current site:

  • Press and hold down the Site Search button.

  • You momentarily see SCANING SITE displayed and hear

  • a tone. When the radio finds a site, it returns to the home

  • display.

Site Search

Button

SITE 2

BATT

ZONE

PROG



Volume set tone side button 1 l.jpg
Volume Set Tone(Side Button 1)

  • To adjust the volume:

  • Select the desired zone and channel.

  • Press and hold the Volume Set button to hear the volume set tone.

  • Adjust the Volume Control knob if necessary.

  • Release the Volume Set button.

On/Off/Volume

Knob

Volume Set

Button



Direct talkaround side button 2 l.jpg
Direct/TalkAround(Side Button 2)

  • Also known as “talk-around operation,” direct lets

  • you bypass the repeater and connect directly to

  • another radio. The transmit and receive frequencies

  • are the same.

  • To directly connect with another radio:

  • Select a conventional channel from the channel mapping list provided by your system administrator.

  • Press the Direct button to enable this feature.

  • The direct symbol ( ) will be displayed. Make sure the

  • receiving unit has the same channel configuration

  • selected. You will not receive normal trunked, talkgroup

  • calls while in direct mode.

  • Press the Direct button again to disengage the feature and return to normal radio operation.

  • The direct symbol ( ) will no longer be displayed.

CONVENTIONAL

BATT

ZONE

PROG

Direct

Button


Keypad lock side button 2 l.jpg
Keypad Lock (Side Button 2)

  • To lock or unlock the radio keypad:

  • Press the Keypad Lock button to lock or unlock the radio keypad.

  • Note: The keypad lock only locks the keypad, not any

  • other button or switch.

  • Note: If an incoming call is received while the keypad is

  • locked, you must unlock the keypad in order to access the

  • call through the menu.

Keypad Lock

Button



Zone select menu l.jpg
Zone Select(Menu)

  • To select a zone:

  • Press the right side of the 4-way Navigation button

  • until ZONE appears on the display.

  • Press the button directly below ZONE.

  • The zone name flashes on the display.

  • Press the right side of the 4-way Navigation button to find the zone you want.

  • If the zone you selected is unprogrammed, repeat step 3.

  • Press the Home button to confirm the displayed zone and channel.

  • OR

  • Press the PTT button to transmit on the displayed zone/channel.

Zone Name

YPD

PATROL

BATT

ZONE

PROG

Push-to-Talk

(PTT)


Smart battery menu l.jpg
Smart Battery(Menu)

  • This feature allows you to view the condition of your

  • Smart Battery.

  • To access information about your battery:

  • Press the right side of the 4-way Navigation button until BATT is displayed.

  • Press the button directly below BATT.

  • Battery data is displayed as follows:

  • CAPACITY indicates the current charge on the battery.

  • INIT indicates the date of the initial use of the battery.

  • EST CHGS indicates the estimated number of charges on

  • the battery.

  • Note: If a Smart Battery is not powering your radio, the

  • display will read SMART BATT DATA NOT AVAILABLE.

YPD

PATROL

BATT

ZONE

PROG


Scan list edit menu 1 of 3 l.jpg
Scan List Edit(Menu) – 1 of 3

This feature lets you change scan list members and

priorities.

To edit the scan list:

1. Press the button directly below PROG.

2, Press the button directly below SCAN.

You see the first available item and the view/program ( )

symbol flashing, indicating the programming mode. You

will also see SEL, DEL, and RCL displayed as possible

selections.

Continued on next slide.

YPD

PATROL

BATT

ZONE

PROG


Scan list edit menu 2 of 3 l.jpg
Scan List Edit(Menu) – 2 of 3

  • Press the button directly below SEL or DEL or RCL.

  • SEL = add the currently displayed item to the scan list.

  • DEL = delete the currently displayed item from the scan list.

  • RCL = view the next available item.

  • Note: You cannot delete a priority member.

  • Continued on next slide.

YPD

PATROL

DEL

SEL

RCL


Scan list edit menu 3 of 3 l.jpg
Scan List Edit(Menu) – 3 of 3

  • Press the left or right side of the 4-way Navigation button to select more zones to be added or deleted.

  • OR

  • Use the 16-Position Select knob to select additional channels to be added or deleted.

  • Note: The maximum number of members for a trunking

  • priority monitor scan list is 15; for a conventional scan list,

  • 15; and for a talkgroup scan list, 10.

  • Press the Home button to exit scan list programming and return to the home display.

16-Position

Select Knob

YPD

PATROL


Nuisance delete nuis menu l.jpg
Nuisance Delete(NUIS Menu)

  • When the radio scans to a channel that you do not

  • wish to hear (nuisance channel), you can temporarily

  • delete the channel from the scan list.

  • To delete a nuisance channel:

  • Press the right side of the 4-way Navigation button until NUIS is displayed.

  • Press the button directly below NUIS to temporarily delete the displayed channel from the scan list.

  • If desired, re-enable the channel by exiting and re-entering scan.

  • Note: Nuisance Delete cannot remove a priority channel

  • ( ) or the last channel in the list.

YPD

PATROL

NUIS