300 likes | 322 Views
R&D Studies of the ATLAS LAr Calorimeter Readout Electronics for super-LHC. Hucheng Chen On behalf of the ATLAS LAr Calorimeter Collaboration March 14 th , 2009. Outline. ATLAS Liquid Argon Calorimeter Current LAr Readout Electronics LAr Electronics Upgrade Motivations R&D Studies
E N D
R&D Studies of the ATLAS LAr Calorimeter Readout Electronics for super-LHC Hucheng Chen On behalf of the ATLAS LAr Calorimeter Collaboration March 14th, 2009
Outline • ATLAS Liquid Argon Calorimeter • Current LAr Readout Electronics • LAr Electronics Upgrade Motivations • R&D Studies • Front-end mixed-signal ASIC design • BNL, Columbia Univ., Univ. of Penn., INFN Milan, IN2P3 • Radiation resistance optical link in SOS • SMU • High speed back-end processing unit based on FPGA • Level 1 calorimeter trigger interface • BNL, Univ. of Arizona, SUNY Stony Brook, IN2P3 LAPP, INFN Milan, Dresden, CERN • Power supply distribution scheme • BNL, Yale, INFN Milan, Univ. of Milan • Summary ATLAS LAr Electronics Upgrade
ATLAS Liquid Argon Calorimeter (LAr) • Liquid Argon Calorimeter • Electromagnetic Barrel (EMB) • |η|<1.375 [Pb-LAr] • Electromagnetic End-cap (EMEC) • 1.4<|η|<3.2 [Pb-LAr] • Hadronic End-cap (HEC) • 1.5<|η|<3.2 [Cu-LAr] • Forward Calorimeter (FCAL) • 3.2<|η|<4.9 [Cu,W-LAr] Barrel calorimeters in detector hall, surrounded by barrel toroids Front End Crate ATLAS LAr Electronics Upgrade
Current LAr Readout Electronics • ~180,000 detector channels • Front-end Electronics • 58 Front End Crates • 1524 Front End Boards • 58 LV Power Supplies • ~1600 fiber optic links between FE and BE • Back-end Electronics • 16 Back End Crates • 192 Read Out Driver Boards • 68 ROS PCs • ~800 fiber optic links between ROD and ROS ATLAS LAr Electronics Upgrade
LHC Upgrade Expectation Luminosity plot before LHC accident • LHC upgrade includes 2 phases • sLHC (phase 2 upgrade) expected to start up ~2017 • ATLAS LAr calorimeter plans for LHC phase 2 upgrade • New requirements to LAr calorimeter readout electronics • Radiation environment assumed to scale x10 • Total power consumption kept same New injectors + IR upgrade phase 2 sLHC Start-up Early operation Linac4 + IR upgrade phase 1 Peak Luminosity: 2017: 3x1034 cm-2s-1 Integrated Luminosity: 2008-17: 650 fb-1 2013-17: 550 fb-1 ATLAS LAr Electronics Upgrade
Current Front-end Architecture • FEB Complexity • 11 ASICs • Several technologies • Obsolescence of technologies (e.g. DMILL) • 19 voltage regulators • Analog pipelines (SCA) • ~80W/board, water cooled • Radiation/lifetime issues • Qualified for 10 years LHC operation • Limited number of spares (~6%) • Other limitations • L1 trigger rate <= 100kHz • L1 trigger latency <= 2.5µs • Consecutive L1 trigger spaced more than 125ns • FEB Upgrade • Component-level replacement impossible • Full replacement based on current technologies • No increase of power budget ATLAS LAr Electronics Upgrade
Proposed Front-end Architecture • FEB “strawman” architecture keeps many options open • Shaping and gain settings • Analog .vs. digital pipeline • On/off detector pipeline • Analog .vs. digital gain selector • Possibly provide analog trigger sums to decouple potential trigger upgrade • FEB upgrade propagates to other boards • Digitization at each bunching crossing • ~100Gbps/board • Higher speed, higher radiation resistance optical link • LV power supplies • Back-end electronics • Possibly interface to L1calo digitally ATLAS LAr Electronics Upgrade
Analog Front-end R&D • An increasing attention to SiGe technology for fast detector readout and in applications where radiation is a concern • ILC R&D program in Europe • Cross sub-system effort in ATLAS • Inner Detector: UCSC, Barcelona • LAr: BNL, Columbia Univ., Univ. of Penn., INFN-Milan, IN2P3 • Characterization of IBM 8WL 0.13μm SiGe BiCMOS • Foundry provided samples • Gamma irradiation @ BNL • Neutron irradiation @ Ljubljana, UMass Lowell • Proton irradiation @ Boston (Mass. Gen. Hospital Cyclotron) • IBM 8WL design kit parts • Test structure Chiplet submitted on Nov. 10th, 2008 • 8WL design kit transistor test devices • 8WL CMOS transistor array Test Structure Chiplet 2.7mm X 1.8mm ATLAS LAr Electronics Upgrade
Analog Front-end: Preamp & Shaper (RC)2 10X Shaper (RC)2-CR Preamp out 0-700μA into preamp • Prototype LAr Preamp and Shaper • Submitted to MOSIS on Nov. 10th, 2008 • Preamp • Very low noise ~0.25nV/√Hz, high dynamic range • Based on low noise line-terminating preamplifier circuit topology presently used in ATLAS LAr calorimeter • Shaper • Fully differential • Robust performance in low signal environment, excellent pickup rejection on and off chip • Explored several low power non feedback approaches, none satisfied noise and linearity simultaneously LAr Chiplet 2mm X 2mm ATLAS LAr Electronics Upgrade
Mixed-signal Front-end: ADC • ADC is the most technologically challenging component in the new “baseline” architecture • 15(6) bit dynamic range - 12 bit resolution - 40MSPS • Radiation tolerant and SEE immune • Strategies being followed • Find the magic bullet with commercial parts • Planning to test several COTS ADCs • Probably not meeting radiation requirement because bit error correction stored in rad-soft RAM • Developing a custom ADC • IBM 8RF CMOS as possible candidate technology • Already shown to be radiation hard • Lower cost compared to SiGe • Lots of CERN based experience ATLAS LAr Electronics Upgrade
Pipeline ADC R&D • Pipelined ADC with digital correction • Each stage resolves more bits than subsequent amplification • Sample & Hold capacitor ultimately also a limiting factor because noise ~ sqrt(kT/C) • Amplifier at stage output is critical • Each stage is 1.5 bits • Overlap between stages allows correction before outputs are “added” together • If correction done on board it will need to store calibration constants in redundant rad-hard memory • ADC development status • Expected to need bipolar technology, started in IBM 8HP SiGeBiCMOS • Decided to redesign in IBM 8RF CMOS due to cost and CERN-based experience • Conversion to 8RF completed and back to target spec (12bit) • Plan to submit a MOSIS test structure proposal by this June ATLAS LAr Electronics Upgrade
Digital Logic Initial Design • 2 Independent clocks • “TTC”-like clock for ADC and ADC multiplexer • Crystal derived clock for high speed components (MUX, serializer) provides much better jitter control • Gray code control to manage multiplexer addresses • Minimize effect of upsets • Data spends less than 8 bunch crossings in ADC multiplexer • Minimize upsets • Triple redundant MUX • 8B/10B encoding at level of the serializer • Full DAQ chain tested and debugged successfully ATLAS LAr Electronics Upgrade
Optical Links in SOS • 0.25μm UltraCMOSTM Silicon on Sapphire (SOS) by Peregrine Semiconductor • Part of the Silicon on Insulator (SOI) family of CMOS technologies, and primarily used in aerospace and military applications because of its inherent resistance to radiation • Low power, low cross talk, good for mixed-signal ASIC designs. • Economical for small to medium scale ASIC development The shift registers are for SEE tests • Characterization of radiation resistance of 0.25μm SOS Technology • A dedicated test chip with transistors, ring oscillators and shift registers designed and fabricated for irradiation tests • TID tests on transistors with gamma (60Co) • With a grounded substrate during irradiation, there is no measurable leakage current and threshold voltage change in both NMOS and PMOS stay within fabrication variations • SEE tests using shift registers with 230MeV proton • No SEE was observed with flux < 1×109 proton/cm2/sec • All shift registers function error free after a total fluence of 1.9×1013 proton/cm2 and ionizing dose of 106Mrad This part for TID test SOS irradiation test chip ATLAS LAr Electronics Upgrade
Link- on-Chip Standard- alone Ring-Type PLL Standard- alone LC-tank PLL Link on Chip 1st Prototype (LOC1) • First prototype available in June 2007 • Specs for 2.5Gbps, 62.5MHz reference clock, power consumption ~200mW • Large jitter is observed and understood (DJ from 4-arm 2-stage mux serializer, RJ comes mostly from the PLL), it will be corrected in the second prototype, the best BER reach is ~10-11 • SEE test with 200MeV proton beam, error free for a fluence of 9x109p/cm2, SEE cross secion less than 1x10-10cm2/proton, data analysis is on-going and more tests are needed Solid line box: implemented in LOC1 Dashed line box: implemented in FPGA A photograph of LOC1 Eye diagram of a 27-1 pseudo random input data, UI = 400ps ATLAS LAr Electronics Upgrade
Link on Chip 2nd Prototype (LOC2) • LOC2 consists of two parts and interface to CERN Versatile Link • 5Gbps 16:1 serializer • Simplify the implementation of high speed circuits • Design of three critical components is in progress (PLL, Static DFF, CML driver) • User interface • Provide better interface to different sub-systems and flexibility to meet different requirements, will be implemented in FPGA for testing purpose • Schematics level simulation finished, layout and simulations are in progress, aim for submission in June and lab test in Sept. 2009 ATLAS LAr Electronics Upgrade
Readout Driver (ROD) Upgrade R&D • Goals • Prototype a ROD that can receive and process continuously digitized detector signals from proposed front-end architecture • Investigate and evaluate several critical technologies which could be used in the design of next generation ROD • R&D interests • High speed optical link & FPGA SERDES • Data bandwidth of entire LAr (1524 FEBs) > 150 Tbps • Industry standard parallel fiber connector MPO/MTP, which has 12 fibers and is about 15mm wide • Low latency lossless data compression/decompression algorithm • Reduce number of links • FPGA based Digital Signal Processing • Take the advantage of parallel data processing • Explore different system level architecture: AdvancedTCA • Take the advantage of industrial standard and high availability features: redundancy, shelf management protocols, power management, fabrics • Perform level 1 trigger sum digitally • Flexibility: fine granularity ATLAS LAr Electronics Upgrade
FEB (1524 modules) EMB ROD cfg. ROD (218 modules) ROD Upgrade Architecture ~5Gbps 1 12 1 LVL1 12 x 2 fibers Pre-Sampler FPGA Interface 2 12 3 ROB 12 4 Interface 12 x 8 fibers Middle FPGA 4 12 ATCA interface 13 12 2 12 x 4 fibers Back FPGA 14 12 ~5Gbps 1 12 LVL1 FPGA Interface 2 12 3 ROB 12 7 Interface 12 x 14 fibers Front FPGA 4 12 ATCA interface 13 12 FPGA 14 12 ATLAS LAr Electronics Upgrade
Sub-ROD and Injector Development • Sub-ROD Injector Features • Generate programmable test data pattern for Sub-ROD • Transfers data to Sub-ROD through a 12 fiber, 40Gbps optical link • Uses high speed SERDES in Altera Stratix II GX Family FPGA • FPGA soft core NIOS processor with Linux and Gigabit Ethernet • Sub-ROD Features • 40Gbps link (12x3.5Gbps) to process ¼ 128-ch FEB data • Uses high speed SERDES (GTP) in Xilinx Virtex-5 FPGA • Buffer data in SODIMM DDR2-533 SDRAM (on back of board) • DSP algorithm implemented in FPGA embedded DSP slices • Gigabit Ethernet link to transfer processed data to PC • ATCA Sub-ROD schematics design finished, layout is in progress • Integration Test on Sept. 17-19, 2008 • 2.4Gbps link running stably • Fixed pattern data transmission of 36 channels (over 12 fibers) • Experiment transceiver from different vendors (Reflex Photonics and Emcore) Sub-ROD Injector Sub-ROD ATLAS LAr Electronics Upgrade
Current LAr to L1calo Interface • Analog transmission with bulky copper cable • Off detector digitization on PPM • Fixed size of trigger tower [ηxφ=0.1x0.1] • L1A latency < 2.5μs ATLAS LAr Electronics Upgrade
Possible LAr to L1calo Interface • Perform level 1 trigger sum digitally • LAr raw data are pre-processed on LAr ROD • Pre-summed trigger tower information sent to L1calo • Flexible granularity • Level 1 latency study • We could very likely control level 1 latency < 2.5μs • Possible ATLAS wide level 1 latency increase Total Latency ~ 40 BC ~ 1us ATLAS LAr Electronics Upgrade
Current LVPS System Implementation 19 voltage regulators/FEB Centralized architecture ATLAS LAr Electronics Upgrade
Strategy on Rad-Tolerant LVPS R&D • Radiation environment assumed to scale x10 • Total power budget of the LAr electronics assumed to remain same, but there will be different voltages/currents required • Rationalization of the number and levels of the voltages • Different input voltage levels and regulations • Use of point of load regulators • Possibility of adopting non-traditional topologies • Reduced voltage across devices • Optimized design of magnetics • Minimize losses and heat • Higher switching frequency • System design Single Failure Tolerant • Migration of the LVPS Architecture • Distributed Power Architecture • A main converter generates a distribution bus and on-boards POLs directly supply low voltages to loads • Intermediate Bus Architecture • In addition to the generation of a main voltage bus, as in the DPA but typically higher,a second set of bus voltages is provided, then lower voltages are given by the point-of-load converters ATLAS LAr Electronics Upgrade
Card #3 Card #2 Card #1 Card #2 niPOL Converter niPOL Converter niPOL Converter niPOL Converter niPOL Converter niPOL Converter LDO POL Converter POL Converter LDO POL Converter POL Converter LDO POL Converter POL POL POL POL POL POL POL POL POL POL POL POL POL POL POL Possible Architectures Distributed Power Architecture 280 VDC V1x VDC Crate Card #1 Main Converter V2x VDC (ex- LVPS) Intermediate Bus Architecture ATLAS LAr Electronics Upgrade
Summary • Proposed new front-end architecture implies new requirements of the whole LAr readout electronics and many R&D interests • Front-end mixed-signal ASIC design • Integrated analog front-end R&D in SiGe • Rad-rad ADC R&D in IBM 8RF CMOS • Radiation resistance optical link in SOS • High speed link to readout ~100Gbps/FEB • Readout Driver (ROD) upgrade R&D • High speed commercial optical link & FPGA SERDES • FPGA based DSP • New level 1 calorimeter trigger interface • Power supply distribution scheme • New power supply distribution R&D to improve power integrity • We have a good number of R&D activities of LAr calorimeter readout electronics aim for ATLAS phase-2 upgrade ~2017 ATLAS LAr Electronics Upgrade
Backup Slides ATLAS LAr Electronics Upgrade
Analog Front-end: Preamp & Shaper • Prototype submitted to MOSIS on Nov. 10th, 2008 • Preamp • Rin = 25Ω • Based on low noise line-terminating preamplifier circuit topology presently used in ATLAS LAr • SiGe higher base doping, lower rbb for low noise • High breakdown (VB=3.6V) devices allow for higher swing to accommodate full 16-bit dynamic range • Thick analog metal allows for low resistance connections to input • BJTs are excellent drivers, output current ~170mA at Iin = 5mA • en,equiv= 0.26nV/√Hz • ENI = 73nArms (incl. 2nd stage, Cd = 1nF) • Ptot = 42mW • Shaper • Linear Input Range 0-.35V less than 0.2% NL • Maximum Input > 3V (Input diode protected) • Shaping (RC)2 - CR Poles: RC = 15ns • Power ~100mW (probably can be reduced 20%) • Shaper Input Referred Noise ~2.2nV /√Hz • Large Emitter followers on outputs allow additional external current to drive Test Loads. Intended to be compatible with 130nm CMOS ADC • Op Amp Unity Gain Stable using internal compensation. • Auto - Common Mode Adjust with external programming control allows tuning of Dynamic Range • Shaper (RC-CR2) optimizes S/N in presence of both electronics noise and pile-up • Differentiation to restore baseline • Electronics : ENI = A/tp3/2 + B/√tp • Pileup : ENE = C√tp • At 1034 tp= 45-50ns (=13ns) optimal ATLAS LAr Electronics Upgrade
Digital Signal Processing in FPGA • Energy calculation in dedicated DSP slices of FPGA • Energy calculation performed at beam crossing rate • Calculate energy using optimal filtering weights • If E > threshold, calculate timing and pulse quality factor • Use FPGA solution which allows a more parallel implementation over traditional DSP • Optimal filter consumes 1 DSP48E block which runs internally at 200MHz with 2 beam crossing latency • Results compared to full floating point calculations • Quantization Error : < 0.02% ATLAS LAr Electronics Upgrade
AdvancedTCA System Architecture • Developed by The PCI Industrial Computer Manufacturer’s Group (PICMG), an industry consortium that has standardized many popular standards such as ISA and PCI technologies for industrial backplane applications • PICMG 3.0 (ATCA) • High Availability, redundancy built into everything: power supplies, fabrics, etc. Boards are designed for hot swap. • Multi-gigabit serial transport (no parallel busses) • choice of protocols: GigE, Infiniband, PCIe, Serial Rapid I/O • Shelf Manager provides intelligent diagnostics, watches over basic health of system • Large form factor and power budget • 8U cards • 200W per slot, 3kW per chassis • 16 boards per crate Integrated Shelf Manager User Defined Connector Area Front Module Size 8U x 280mm Transition Module size 8U x 70mm Dual Star Backplane Redundant Power Entry Modules, -48v ATLAS LAr Electronics Upgrade Air Intake Area
Potential MOSFET for Finger Gap LVPS • Top plot shows threshold voltage of SPP07N60S5 MOSFET and the NTP1060 MOSFET used in the present power supply • In this measurement threshold voltage is defined as value VGS that produces IDS = 0.25 mA, VDS = 40 Volts • Unfortunately, this measurement was ended at 100 krad. As can be seen the rate of change of VGSThr is decreasing and may still be suitable at 450 krad • So strategy would be to make the threshold voltage large so that the device is still usable at high total doses • Bottom plot shows Single Event Burnout cross section for the same two MOSFETs • Although both MOSFETs are rated for 600 volts the Infineon SPP07N60S5 shows a 50 volt advantage in de-rating behavior • Unfortunately, this Infineon product is being discontinued and should not be used in a new design. However, it shows that a commercial MOSFET can exist that could be used in this application ATLAS LAr Electronics Upgrade
COTS Bulk Converters Tested • Commercial Buck converters were tested with ionizing radiation until some significant changes were observed • These are small converters which are often integrated in 1 chip and are board mounted for POL applications • All “useful” devices tested failed at doses much lower than would be required in a sLHC environment • One device which survived to very high total doses was the EN5360 produced by Enpirion in 0.25 μm CMOS technology. This buck converter is still working after 100 Mrad • Commercial device is possible to be radiation hard and perhaps others in similar technologies will be also • We are evaluating radiation characteristics of IHP SGB25VD technology transistors ATLAS LAr Electronics Upgrade