1 / 57

Jeopardy

Jeopardy . Automotive Edition. Heat quantity is measured in this. . British thermal unit (BTU). . The refrigerant changes from a vapor to a liquid in this component. . Condenser. . The storage tank for R-134A is this color. . Blue/light blue. .

noel
Download Presentation

Jeopardy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Jeopardy Automotive Edition

  2. Heat quantity is measured in this .

  3. British thermal unit (BTU) .

  4. The refrigerant changes from a vapor to a liquid in this component .

  5. Condenser .

  6. The storage tank for R-134A is this color .

  7. Blue/light blue .

  8. This valve opens and closes to meter a small amount of refrigerant into the evaporator .

  9. Thermostatic expansion valve (TXV)

  10. The refrigerant enters this component as a low pressure vapor and exits as a high pressure vapor .

  11. Compressor .

  12. This agency was created in 1971 to deal with hazards in the workplace .

  13. OSHA .

  14. A pneumatic tool is powered by what .

  15. Compressed air .

  16. The majority of injuries in an automotive shop are caused by what .

  17. Slips/falls .

  18. All flammable and combustible chemicals should be stored in this .

  19. Fire resistant cabinet .

  20. Shops must be properly ventilated because exhaust gas contains this poisonous material .

  21. Carbon monoxide .

  22. This is a 50/50 mixture of water and anti-freeze .

  23. Coolant .

  24. These components are designed to move air through the radiator .

  25. Cooling fans .

  26. This component is the primary heat transfer device for the engine

  27. radiator .

  28. This part controls the flow of coolant between the engine and radiator

  29. thermostat .

  30. This part maintains a specified pressure in the cooling system .

  31. Pressure/radiator cap .

  32. This design engine has 4 cylinders side by side .

  33. Inline 4 .

  34. This person in the shop is responsible for the day to day operations of the shop .

  35. Service manager .

  36. This is what is used to document customer/vehicle information .

  37. Work/repair order .

  38. This is what is used to check the oil level of the engine .

  39. Dipstick .

  40. Daily Double .

  41. This system helps reduce the vehicle’s speed by using friction .

  42. Braking system .

  43. This type of system has one injector per bank of cylinders .

  44. Throttle body injection (TBI) .

  45. This type of MFI system pulses the injectors in separate sets .

  46. Banked multiport fuel injection .

  47. This test evaluates the injector’s ability to deliver a uniform amount of fuel .

  48. Injector balance test .

  49. Some vehicle are equipped with this mode when cranking engine at wide open throttle .

More Related