1 / 23

RF Amplifier Simulation and Design

RF Amplifier Simulation and Design. ELEC 412 Fall 2004. S-Parameters from mrf581f.s2p. S-Parameters from mrf581f.s2p. S11 Data Used. S-Parameters at 500 MHz. S11 Matching Design. S-Parameters from mrf581f.s2p. Get S22 Data. S22 Result. Configure Library to Add Components to List.

noah-rutledge
Download Presentation

RF Amplifier Simulation and Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RF Amplifier Simulation and Design ELEC 412 Fall 2004

  2. S-Parameters from mrf581f.s2p

  3. S-Parameters from mrf581f.s2p

  4. S11 Data Used

  5. S-Parameters at 500 MHz

  6. S11 Matching Design

  7. S-Parameters from mrf581f.s2p

  8. Get S22 Data

  9. S22 Result

  10. Configure Library to Add Components to List

  11. Add SParamData to Components

  12. Select Vendor Elements NPN

  13. Drag Motorola Transistors to Design

  14. Double Click on Part Click to select MRF581f For VCE=10V, IC=50 mA Select the MRF 581f

  15. Select mrf581f and Click OK Select the MRF 581f

  16. MRF581f selected Select the MRF 581f S-Parameter Data

  17. Design the Circuit

  18. Set Up the Analysis

  19. 2 3 4 1 Set Up the Frequency Sweep

  20. 2 Create Report (Results) and Plots 1 Analyze Analyze and Report Results

  21. Add Traces Add Traces for Output

  22. Result of Design

  23. Result Without Matching

More Related